2014 Mazda 3

[JohnM]

Minor model changes usually occur 3 years after a model is released so 2017 sounds just about right. Based on the CX5 changes they'll just tinker with the lights, grills and rims and leave everything else almost as is.

[AltisAndMZ3FAN]

Minor model changes usually occur 3 years after a model is released so 2017 sounds just about right. Based on the CX5 changes they'll just tinker with the lights, grills and rims and leave everything else almost as is.

Parang tingin ko sa MZ3 ay sobrang maganda padin sya kahit wala ng changes in the next 10 years. hehe. Kodo really works.

[JohnM]

Parang tingin ko sa MZ3 ay sobrang maganda padin sya kahit wala ng changes in the next 10 years. hehe. Kodo really works.

Kahit naman gen 1 napapalingon pa rin ako if it looks clean and well kept. Gen 2 din lalo na because it's very rare here.

[AltisAndMZ3FAN]

Kahit naman gen 1 napapalingon pa rin ako if it looks clean and well kept. Gen 2 din lalo na because it's very rare here.

Yup sir, mazda really has exciting/ageless design. parang nakaplano longterm lagi ung current design nila to be competitive. Still dreaming of that speed mz3 version. obvious naman sa username LOL.

[JohnM]

Still dreaming of that speed mz3 version.

Not in the near future: Mazda Is Too 'Mature' Now To Build You A Mazdaspeed3

[plainBlack]

Louie tried something like this on his car a year ago. Medyo mahal (mga almost 20k) and medyo tedious gamitin. Try asking him kung may progress na.

medyo pricey nga sir. Nagpa-quote ako recently dun sa direct seller (JDM Technik), nagbigay siya price $610 total comprising the mazda interface ($290)and the android box ($320). Take note, first shipping will be split half.. so takbo ng total cost in peso, roughly nasa 25-40k price range. Kukuha nalang ako nito kung ganun:

Buy Products Online from China Wholesalers at Aliexpress.com

30k lang sa SNY Customs, deferred payment pa.. at na-install na sa mga BMW premium cars ung unit.

[travajante]

Hello Sirs, I need an advice. I plan on getting a Mazda3 2.0 hatchback soon. However, I read somewhere that the Mazda3 will be getting a refreshed model later this year. Can anyone confirm this? Should I get the existing model now or should I hold off for the rumured 2017 refreshed version?

TIA.

Refresh as expected will be minor...Spyshots showed console:


Steering wheel:


Don't mind the camo'd grille plastered into a Lexus hourglass, it'll still retain the kodo 5point grille but will have bumper tweaks:

Still dreaming of that speed mz3 version. obvious naman sa username LOL.

Sad it's unlikely happening for the gen3....

[JohnM]

I will miss the handbrake handle

[travajante]

I will miss the handbrake handle

Yeah, i might even choose a pre-facelift coz of that.

[charlie021]

1 week p lang m3 dami ko na agad nkuha gasgas. [emoji24] hirap magparking samin sikip ng lugar. Cover po ba ng warranty yung mga ganon gasgas at dents? Magkano kya mgagastos dun


Sent from my iPhone using Tapatalk

[squidol]

Hello m0wn3rs. Above pic is my 2-month old m3 sedan w/ 1.2km odometer reading.

The temporary plate(laminated paper w/ conduction # printed on it) from casa is already fading due to water seeping in during car wash. I want to replace it with good steel plate. Where can i get those so i can proceed with the plate relocation mod?

Look at that large ugly plastic plate below. Almost covering the whole grill aesthetics.



Also, who does the best service for installation of clear bras and optiguard paint protection around manila? May maliit kasi na tuklap(4mm diameter) na nakita, siguro dahil sa aspaltong tumama habang nasa expressway.

I need these upgrades because i do not have a garage. I'm using a lightweight car cover to prevent direct sunlight, bird droppings.

Lastly, would I void yojin 3 if i replace stock 16s with 18s?

Thanks

[chiezee]

Kahit naman gen 1 napapalingon pa rin ako if it looks clean and well kept. Gen 2 din lalo na because it's very rare here.

Same here. Im one of the few guys who appreciate the looks of the Gen 2.

Sent from my SM-N9208 using Tapatalk

[travajante]

1 week p lang m3 dami ko na agad nkuha gasgas. [emoji24] hirap magparking samin sikip ng lugar. Cover po ba ng warranty yung mga ganon gasgas at dents? Magkano kya mgagastos dun

I feel your pain, charlie sir. Sadly, no warranty covers dents & scuffs. Insurance may. Avoid paint retouches whenever possible. Factory finishes will almost always be better. Should you have dents PDR can reverse, go for that scarless approach. For paint protection, there are many out there who can offer you their 'magic'....& then there are those passionate fellow Mown3rs, justdiy of Technical Details & Manskee of ManskeeMotoring. PM them for sound OCD advice.

[chiezee]

Do i need to adjust auto leveling headlights when lowering with htech??

Sent from my SM-N9208 using Tapatalk

[MIKEL haha]

Amazing Good Day guys

[travajante]

Hello m0wn3rs. Above pic is my 2-month old m3 sedan w/ 1.2km odometer reading.

The temporary plate(laminated paper w/ conduction # printed on it) from casa is already fading due to water seeping in during car wash. I want to replace it with good steel plate. Where can i get those so i can proceed with the plate relocation mod?

Look at that large ugly plastic plate below. Almost covering the whole grill aesthetics.



Also, who does the best service for installation of clear bras and optiguard paint protection around manila? May maliit kasi na tuklap(4mm diameter) na nakita, siguro dahil sa aspaltong tumama habang nasa expressway.

I need these upgrades because i do not have a garage. I'm using a lightweight car cover to prevent direct sunlight, bird droppings.

Lastly, would I void yojin 3 if i replace stock 16s with 18s?

Thanks

For your temp plate, you can find sign & sticker shops in malls who can do you a decent plastic 1. I could've pointed you to a good 1 if you were local to me. Here was mine 2yrs ago.


For clear bras, go Xpel. Reach out to fellow Mown3r Manskee over at Manskee-Motoring FB. He can help you w/ great deals.

Don't worry too much if your dealership says you'll void suspension warranty if you switch to 18s. This makes no sense as 1.5s & 2.0s share identical suspension systems...& besides, the M3 suspension is solid, well designed & will last way beyond warranty period before needing any attention.
It's your call to bear the painful sight of 16s or do what you gotta do to squeeze all the joy out your Mown3rship.
Happy Motorin', squidol sir.

[travajante]

Do i need to adjust auto leveling headlights when lowering with htech??

Sent from my SM-N9208 using Tapatalk

No one ever needed to do such, chiezee sir.
HTech drop is pretty mild & if it does have an effect, it would probably give you a slightly raised focus angle.

[justdiy]

I feel your pain, charlie sir. Sadly, no warranty covers dents & scuffs. Insurance may. Avoid paint retouches whenever possible. Factory finishes will almost always be better. Should you have dents PDR can reverse, go for that scarless approach. For paint protection, there are many out there who can offer you their 'magic'....& then there are those passionate fellow Mown3rs, justdiy of Technical Details & Manskee of ManskeeMotoring. PM them for sound OCD advice.

Thanks brah James and Congrats for being Mazda3skyactivclub's featured Car of the Month!

I missed the forums! Please bring back the app.

To sir charlie, we're here to help you with your minor scratches and swirls! You could have it detailed at your trusted detail shop as well. But after detailing, make sure to learn how to avoid those so it won't come back quickly. The usual culprit is improper cleaning methods so be careful everytime you touch that paint. Hehe

[travajante]

Thanks brah and Congrats for being Mazda3skyactivclub's featured Car of the Month!

I missed the forums! Please bring back the app.

To sir charlie, we're here to help you with your minor scratches and swirls! You could have it detailed at your trusted detail shop as well. But after detailing, make sure to learn how to avoid those so it won't come back quickly. The usual culprit is improper cleaning methods so be careful everytime you touch that paint. Hehe

Thanks, brah.
I'd trust an OCD Mown3r more than anyone......& justdiy is 1.

[charlie021]

I feel your pain, charlie sir. Sadly, no warranty covers dents & scuffs. Insurance may. Avoid paint retouches whenever possible. Factory finishes will almost always be better. Should you have dents PDR can reverse, go for that scarless approach. For paint protection, there are many out there who can offer you their 'magic'....& then there are those passionate fellow Mown3rs, justdiy of Technical Details & Manskee of ManskeeMotoring. PM them for sound OCD advice.

Thanks sa advice sir trav. Cover ba ng insurance ko nga ganong dents and scratches? May gagastusin po ba ako pag ipapaayos ko sa insurance? Ano po yung PDR. Sorry total newbie here. And ano po yung mga magic na yan sir. Totally no idea here. Thanks sa inputs [emoji3]