Results 1,791 to 1,800 of 7178
-
Verified Tsikot Member
- Join Date
- Oct 2012
- Posts
- 118
December 7th, 2012 09:10 PM #1791My Feedback on ranger ride, sa front comfortable. But rear passengers commented bumpy ride. Maybe due to my tire inflation at 38psi. Dapat lower Kung no load. Hope others can comment sa ride especially sa rear.
How about getting innova? I know it has comfortable ride. I just find the design kinda plain.
-
December 7th, 2012 09:19 PM #1792
-
December 7th, 2012 09:27 PM #1793
-
Verified Tsikot Member
- Join Date
- Feb 2008
- Posts
- 207
December 8th, 2012 07:58 AM #1794Sir jx290 and duramax,
thanks for your swift reply. Il do this po.
Some clarifications lang sir,
1, do i need to turn key from off to start engine or till mag on lang lights sa instrument panel?
2, Dapat po ba close all doors when doing the procedure?
3, yun pressing lock/unlock button sir. 3x lock then 3x din unlock button po or either of the button lang press 3x?
4, after driver configuration mode, does it automatically goes into autolock by speed or i need to do it separate procedure?
TIA
-
Verified Tsikot Member
- Join Date
- Feb 2008
- Posts
- 207
December 8th, 2012 08:03 AM #1795
-
Verified Tsikot Member
- Join Date
- Dec 2010
- Posts
- 336
December 8th, 2012 08:32 AM #1796Answers.
1, do i need to turn key from off to start engine or till mag on lang lights sa instrument panel?
ANS. You don't need to start engine, only ignition on yung pangalawang click ng key. Iilaw lahat nasa instrument panel.
2, Dapat po ba close all doors when doing the procedure?
ANS It doesnt matter if you close or not,
3, yun pressing lock/unlock button sir. 3x lock then 3x din unlock button po or either of the button lang press 3x?
ANS. No. Pressing 3 times means, as in 3 times lang talaga hindi 6 times (3 sets of lock/unlock) don't be confused.
4, after driver configuration mode, does it automatically goes into autolock by speed or i need to do it separate procedure?
ANS You don't need another procedure when you have done setting this up in 30 seconds time. You can turn off the key and leave it or if you wish, you can try starting it and drive to see if it works.
-
Verified Tsikot Member
- Join Date
- Oct 2012
- Posts
- 118
December 8th, 2012 04:35 PM #1797
-
-
December 10th, 2012 09:37 AM #1799
thep-00 just got my unit last November 30 (nagpareserve ako ng August) and still mahaba pa ang pila lalo na sa 4x2 A/T.
In Thailand... more than 25,000 pa ang demand according to Ford report below.
http://media.ford.com/article_displa...ticle_id=36749
Ford Philippines | News and Events CalendarLast edited by teeyoh; December 10th, 2012 at 09:50 AM. Reason: added link
-
Verified Tsikot Member
- Join Date
- Nov 2012
- Posts
- 36
December 10th, 2012 12:45 PM #1800Thanks for the info sir teeyoh. Hintayin ko na lng tutal naghintay naman na ako ng matagal tagal. 2months na ngayon so most likely next month ko na makukuha unit ko.
Kinukulit na kasi ako ni esmi kumuha na lng ng iba kaso decided na talaga ako sa ranger. Frustrating lng kasi pinaasa lng kami ng SA. After ibigay ang PO saka naglahong parang bula ang SA namin. Hindi magtetext kung di pa kukumustahin.
AT ba unit niyo sir? mayroon din po bang issues sa transmission?
How about 97 LXi?
Civic horsepower