Remote bypass oil filtration

[jodyola13]

Sir Ry_Tower anong shop sa cash and carry, madalang ako mapunta dun hindi ko kabisado. Tia

boss zixx sa may Mezzanine(2nd floor), forgot the name of the px store but it's near the generics pharmacy, dulong shop sa right side after the stairs. 440 per liter/quart

[zix888]

boss zixx sa may Mezzanine(2nd floor), forgot the name of the px store but it's near the generics pharmacy, dulong shop sa right side after the stairs. 440 per liter/quart

Thank you sir , tamang tama 1000kms to go change oil na kasi ako

[zix888]

Casa installed it very tight as in we had to use vise just to unscrew the filter. Di ba dapat hand-tightened lang? Out of stock na kasi yung BF7534 sa Volmaxx. Anyways, I'll give Baldwin another shot on my next heavy pms pero baka BF7534 na. Thanks locoroco and doc

In my gtv, i also used the 7534, i did the fuel filter change myself, and yes tightened it using my hands ONLY. Checked everything after the change, so far so good, wAla naman problem.

[locoroco777]

Casa installed it very tight as in we had to use vise just to unscrew the filter. Di ba dapat hand-tightened lang? Out of stock na kasi yung BF7534 sa Volmaxx. Anyways, I'll give Baldwin another shot on my next heavy pms pero baka BF7534 na. Thanks locoroco and doc

nung nagpakabit ako ginmitan din ng vice pati yung pagtangal kasi ginamitan din....so kung gano kahigpit yung pagka kabit before ng casa ganun ulit pagka kabit sa bosch...

[miko101130]

Doc here's a pic of the oil filter Wix 51515 i used.. changed it at 5,250 kms

gasket

nitrile rubber

bypass valve

head

filter media, 45 pleats...

[miko101130]

sorry it was wix 51365

[zix888]

sorry it was wix 51365

Bro anong oto pinaggamitan? Thanks

[miko101130]

pajero gen III.5
6G74 engine gasoline

[dvldoc]

Looks like your anti-drain back valve has a tear in it. Did that happen taking it off?

[miko101130]

yeah, i accidentally tore it off when removing it from the housing.. haha

[dvldoc]

Your really killing yourself on short oil change intervals, the WIX filter is good on just about any gas engine for around 12000km. And as far as oil goes if your using CH-4/SL or CI-4/SL Rated oils then there is abolutely no reason to be changing it till around 10000km to 12000km and that's the dyno stuff. If you use a synthetic (Group III and up) 12000km is what you should look for.

CH-4/SL or CI-4/SL oils will have a high TBN that will still be perfectly good at that oil change interval and still have plenty of the additive package left in it. Now if your using low end SL or SM oil that's a different story.

With the proven source of availible engine oil anylisis you can look up you can clearly see there is no reason to run your oil or filter for such short durations. Changing oil based off of common schools of though are just not accurate.

WIX is a higher end filter so feel good with going 12000km with it.

[zix888]

Update

Bf7534 still out of stock * volmax, went there today to get 2 pcs of bd28

[Ry_Tower]

Update

Bf7534 still out of stock * volmax, went there today to get 2 pcs of bd28

Sir zix888 next paki-ask naman if they have bd7028.

[tuazon7]

ako I used BF7534 on my 4m41 2k kms na....still kicking like a horse hehe....I think hindi siguro match yung BF7535? or probably faulty yung nakuha mong filter....

Just installed BF7535 over the weekend, doing good so far...this is indeed the direct replacement of 1770A053 as per all the cross-referencing done, even using the Denso P/N at times. Even checked and measured the thread pitch. BF7534 can fit but do not know how tight it can really hold...

[zix888]

Just installed BF7535 over the weekend, doing good so far...this is indeed the direct replacement of 1770A053 as per all the cross-referencing done, even using the Denso P/N at times. Even checked and measured the thread pitch. BF7534 can fit but do not know how tight it can really hold...

Good to know that 7534-35 can fit our monty

[locoroco777]

BF7534 can fit but do not know how tight it can really hold...

its holding tight alright.....

I'm just wondering why sir nelz is experiencing stalling with the 7535 then after it was replaced with an OEM the stalling went away....

[edtf]

dvldoc would you know any oil filter relocator for a M26x1.5?

[zix888]

Sir zix888 next paki-ask naman if they have bd7028.

Alright sir Ry_Tower, will put that in my list.

[dvldoc]

dvldoc would you know any oil filter relocator for a M26x1.5?

Not that are made in the US, the kits come in 3/4"-16, 13/16"-16, 1"-12, M18x1.5, M20x1.5 and M22x1.5 thread patterns.

[edtf]

Not that are made in the US, the kits come in 3/4"-16, 13/16"-16, 1"-12, M18x1.5, M20x1.5 and M22x1.5 thread patterns.

YUP been researching on them and that is what I got. Thanks! I might have to go the fabricated way