Remote bypass oil filtration

[locoroco777]

I bought my Montero 4M41 a Baldwin BF7535 fuel filter which is the direct replacement for OEM#1770A053 according to the Baldwin website. However, after casa installed I had problems of engine stalling once everyday for 2 days. Went back to casa to have it check and they replaced the suction control valve (SCV). Good thing it's still under warranty. But the problem of stalling still persists. So I bought the OEM filter and replaced it myself. Now no more stalling. Hindi ba pwede anf BF7535 para sa 4M41??

ako I used BF7534 on my 4m41 2k kms na....still kicking like a horse hehe....I think hindi siguro match yung BF7535? or probably faulty yung nakuha mong filter....

[nelz]

Casa installed it very tight as in we had to use vise just to unscrew the filter. Di ba dapat hand-tightened lang? Out of stock na kasi yung BF7534 sa Volmaxx. Anyways, I'll give Baldwin another shot on my next heavy pms pero baka BF7534 na. Thanks locoroco and doc

[zix888]

Casa installed it very tight as in we had to use vise just to unscrew the filter. Di ba dapat hand-tightened lang? Out of stock na kasi yung BF7534 sa Volmaxx. Anyways, I'll give Baldwin another shot on my next heavy pms pero baka BF7534 na. Thanks locoroco and doc

In my gtv, i also used the 7534, i did the fuel filter change myself, and yes tightened it using my hands ONLY. Checked everything after the change, so far so good, wAla naman problem.

[locoroco777]

Casa installed it very tight as in we had to use vise just to unscrew the filter. Di ba dapat hand-tightened lang? Out of stock na kasi yung BF7534 sa Volmaxx. Anyways, I'll give Baldwin another shot on my next heavy pms pero baka BF7534 na. Thanks locoroco and doc

nung nagpakabit ako ginmitan din ng vice pati yung pagtangal kasi ginamitan din....so kung gano kahigpit yung pagka kabit before ng casa ganun ulit pagka kabit sa bosch...

[miko101130]

Doc here's a pic of the oil filter Wix 51515 i used.. changed it at 5,250 kms

gasket

nitrile rubber

bypass valve

head

filter media, 45 pleats...

[miko101130]

sorry it was wix 51365

[zix888]

sorry it was wix 51365

Bro anong oto pinaggamitan? Thanks

[miko101130]

pajero gen III.5
6G74 engine gasoline

[dvldoc]

Looks like your anti-drain back valve has a tear in it. Did that happen taking it off?

[tuazon7]

ako I used BF7534 on my 4m41 2k kms na....still kicking like a horse hehe....I think hindi siguro match yung BF7535? or probably faulty yung nakuha mong filter....

Just installed BF7535 over the weekend, doing good so far...this is indeed the direct replacement of 1770A053 as per all the cross-referencing done, even using the Denso P/N at times. Even checked and measured the thread pitch. BF7534 can fit but do not know how tight it can really hold...

[zix888]

Just installed BF7535 over the weekend, doing good so far...this is indeed the direct replacement of 1770A053 as per all the cross-referencing done, even using the Denso P/N at times. Even checked and measured the thread pitch. BF7534 can fit but do not know how tight it can really hold...

Good to know that 7534-35 can fit our monty

[locoroco777]

BF7534 can fit but do not know how tight it can really hold...

its holding tight alright.....

I'm just wondering why sir nelz is experiencing stalling with the 7535 then after it was replaced with an OEM the stalling went away....

[edtf]

dvldoc would you know any oil filter relocator for a M26x1.5?

[dvldoc]

dvldoc would you know any oil filter relocator for a M26x1.5?

Not that are made in the US, the kits come in 3/4"-16, 13/16"-16, 1"-12, M18x1.5, M20x1.5 and M22x1.5 thread patterns.

[edtf]

Not that are made in the US, the kits come in 3/4"-16, 13/16"-16, 1"-12, M18x1.5, M20x1.5 and M22x1.5 thread patterns.

YUP been researching on them and that is what I got. Thanks! I might have to go the fabricated way