Toyota Innova Owners & Discussions [ARCHIVED]

[velocityboy]

bago lang ako dito as i got my innova last week. innova j unit ko and i would welcome advise from you especially na gusto kong pa-pogi-hin unit ko like accessorize it. saan ko ba pwede palagyan ng spoiler, power windows, central lock and keyless entry, etc? (sana yung pinaka reasonable ang price at kung saang store) can you guide me with this please? thanks

i suggest functional accessories like mud guards, door body moldings and third brake lights muna kabit mo, aside from it looking like the G variants, its also serves its purpose. try banaue or malugay st..... cnt go wrong in those places.

for the power windows, i have decided to wait and see muna, been seeing alot of replacement power windows that dont work just after a few months of use, afaik i will save up for the original ones since mas matibay raw talaga.

Also be wary of putting fog lights unless you have attached front wheel well covers, because if you pass by wet areas, it soils the fog lights because it has no protection from the water that splashes. sayang lang. Have seen numerous innovas that have fog lights that are moist inside. I think it is due to the absence of a wheel well cover.

If anybody knows where to buy the front lang, pa post naman, i have seen the whole set pa lang for all four wheel wells, php 3.5k in banaue.

regards

[hahnvin]

mga peeps, gusto ko magpakabit ng mouldings and spoiler. I know there's a lot in Banawe, however I'm too far coming from Sn Pedro. Any nearer stores that sell these stuffs, Evangelista would do. Thanks mga peeps. I'm enjoying my ride so far.

sa kid audio po sa sa may sta. rosa madami accessories para sa innova. pag pumunta ka dun hanapin mo lang si cindy. sabihin mo refer ka ni chris

[bongliza]

sa kid audio po sa sa may sta. rosa madami accessories para sa innova. pag pumunta ka dun hanapin mo lang si cindy. sabihin mo refer ka ni chris

thanks bro, kilala ko si cindy, dun ako nagpaset-up dati and some accessories for my Adventure. However, dunno if I can save money if I go to Evengelista. mas mahal kasi sila ng few hundred bucks. Have you tried comparing prices from them with Evengelista?

[Innova_Boy]

SO far those not affected by axle shaft recall....

1. Innova_boy
2. busy road
3. velocityboy
4. D4D

pansin ko lang lahat tayo D4D engine right?

update lang...

WBR,

[hahnvin]

thanks bro, kilala ko si cindy, dun ako nagpaset-up dati and some accessories for my Adventure. However, dunno if I can save money if I go to Evengelista. mas mahal kasi sila ng few hundred bucks. Have you tried comparing prices from them with Evengelista?

mas mahal sila ng unti pero ganun din kasi gas and toll fee naman ang katapat nun. so less pagod and mas malapit kung magkaproblem

[velocityboy]

SO far those not affected by axle shaft recall....

1. Innova_boy
2. busy road
3. velocityboy
4. D4D

pansin ko lang lahat tayo D4D engine right?

update lang...

WBR,

am vvti frnds.....

[velocityboy]

SO far those not affected by axle shaft recall....

1. Innova_boy
2. busy road
3. velocityboy
4. D4D

pansin ko lang lahat tayo D4D engine right?

update lang...

WBR,

probably its on the production run

[johnart]

SO far those not affected by axle shaft recall....

1. Innova_boy
2. busy road
3. velocityboy
4. D4D
5. johnart vvti G feb 2006 bought

[bruswayne]

SO far those not affected by axle shaft recall....

1. Innova_boy
2. busy road
3. velocityboy
4. D4D
5. johnart vvti G feb 2006 bought

6. bruswayne

[jam2]

i suggest functional accessories like mud guards, door body moldings and third brake lights muna kabit mo, aside from it looking like the G variants, its also serves its purpose. try banaue or malugay st..... cnt go wrong in those places.

for the power windows, i have decided to wait and see muna, been seeing alot of replacement power windows that dont work just after a few months of use, afaik i will save up for the original ones since mas matibay raw talaga.

Also be wary of putting fog lights unless you have attached front wheel well covers, because if you pass by wet areas, it soils the fog lights because it has no protection from the water that splashes. sayang lang. Have seen numerous innovas that have fog lights that are moist inside. I think it is due to the absence of a wheel well cover.

If anybody knows where to buy the front lang, pa post naman, i have seen the whole set pa lang for all four wheel wells, php 3.5k in banaue.

regards

thanks for d advice. i have visited goldcars banawe and d whole power window assembly (all 4 windows) costs 18.5k, medyo mahal so i have to save and cut off some of my uncalled for expenses para makabili ng "original" within the next few weeks. unahin ko na muna ang central lock at keyless entry with alarm,

[velocityboy]

thanks for d advice. i have visited goldcars banawe and d whole power window assembly (all 4 windows) costs 18.5k, medyo mahal so i have to save and cut off some of my uncalled for expenses para makabili ng "original" within the next few weeks. unahin ko na muna ang central lock at keyless entry with alarm,

Jam- let me know kung napakabit mo na yung orig power windows....at kung magkano at saan mo pinagawa.....

nagpakabit na ako ng back up sensor, central lock at alarm, mga 1-2k each.....

[ReccaH]

jam2 that's good news! im also shopping around for power windows. do you think goldcars is better off than casa? please give us feedback sa gawa ng goldcars or if you want kahit sabay na tayo! hehe. thanks.

[velocityboy]

Anybody here has bought the wheel well cover for their innovas? Also has anybody tried the rust proofing of ziebart, wherein they will spray rust proof inside your door and fender panels, this is against the undercoating that the casa gives....

feedbacks woudl be great. thanks

cheers

[jam2]

Jam- let me know kung napakabit mo na yung orig power windows....at kung magkano at saan mo pinagawa.....

nagpakabit na ako ng back up sensor, central lock at alarm, mga 1-2k each.....

di pa ako nagpakabit power windows..it costs 18.5k at nahawakan ko na ang mismong assembly. maganda at makapal and plastic moulding. made in taiwan. seems a lot better (in looks and functionality) than the ones being installed in pioneer st. pasig (near jollibee pioneer) na tig 5k lang kc dalawang windows lang ng front ang nakakabitan, "universal power window" daw tawag dun. baka dis week na ako mag decide. ty. btw, saan ka nagpakabit ng central lock with alarm? magkano exact price? ty uli

[jam2]

jam2 that's good news! im also shopping around for power windows. do you think goldcars is better off than casa? please give us feedback sa gawa ng goldcars or if you want kahit sabay na tayo! hehe. thanks.

pwede tau sabay. hehehe. anyway, di ko lang alam which is better kung casa installed or goldcars banawe acquired. pero sa price, whew, 27k sa casa for the same unit you can get at goldcars for 18.5k. pareho din naman taiwan-made yan...

[number001]

Anybody here has bought the wheel well cover for their innovas? Also has anybody tried the rust proofing of ziebart, wherein they will spray rust proof inside your door and fender panels, this is against the undercoating that the casa gives....

feedbacks woudl be great. thanks

cheers

Technically, rustproofing is done at the time the vehicle is being assembled in the factory, while undercoating is the spraying of black tar-like substance underneath the vehicle (ie. wheel wells, etc). These two words are often mistaken or commonly used to refer to one or the other.

Based on your post, I believe what the casa gave you is "undercoating", which is the same as the services Ziebert, Tuff-Kote Dinol, Scrubby, gasoline stations, etc. are offering. In your case, I belive its redundant to go to Ziebert and et al. Just wait for a year and have some minor touch-up (if needed) at the abovementioned undercoaters.

[Innova_Boy]

Anybody here has bought the wheel well cover for their innovas? Also has anybody tried the rust proofing of ziebart, wherein they will spray rust proof inside your door and fender panels, this is against the undercoating that the casa gives....

feedbacks woudl be great. thanks

cheers

I have mine rustprrof by Ziebart early this year, cost me 11k.... nothing much to say cause no problem yet... but my unit has some small rust portion at the top of 2nd row door, driver side. will have it repainted by CASA next month...

WBR,

[number001]

I have mine rustprrof by Ziebart early this year, cost me 11k.... nothing much to say cause no problem yet... but my unit has some small rust portion at the top of 2nd row door, driver side. will have it repainted by CASA next month...

WBR,

Do you live near the sea? pls post a pic if possible. Thanks!

[velocityboy]

Technically, rustproofing is done at the time the vehicle is being assembled in the factory, while undercoating is the spraying of black tar-like substance underneath the vehicle (ie. wheel wells, etc). These two words are often mistaken or commonly used to refer to one or the other.

Based on your post, I believe what the casa gave you is "undercoating", which is the same as the services Ziebert, Tuff-Kote Dinol, Scrubby, gasoline stations, etc. are offering. In your case, I belive its redundant to go to Ziebert and et al. Just wait for a year and have some minor touch-up (if needed) at the abovementioned undercoaters.

The casa was ablet to gave my unit an undercoating before they delivered it to me (scrubby coat i believe) , this is the black, tar like stuff that is sprayed underneath the vehicle, wheel wells, chasis and even the bumpers etc....

The Ziebart rust proofing that i was mentioning is the application of a chemical inside the door panels, hood, fenders and trunk. It is suppose to be a life time guarantee but the assumption is that you must not miss the yearly of application. Ziebart was offeing this to me at 11k but i was able to haggle and bring it down to 7k.... yearly application was quoted at and php500. I guess if you are seiously considering maintaining the vehicle for more than 5 years its woth it.

Innova boy, did they bore holes in the side of the doors when they applied the chemicals?

Also consideing this bec my office is in the manila bay area, so the salt water may have an effect on the unit.

[velocityboy]

di pa ako nagpakabit power windows..it costs 18.5k at nahawakan ko na ang mismong assembly. maganda at makapal and plastic moulding. made in taiwan. seems a lot better (in looks and functionality) than the ones being installed in pioneer st. pasig (near jollibee pioneer) na tig 5k lang kc dalawang windows lang ng front ang nakakabitan, "universal power window" daw tawag dun. baka dis week na ako mag decide. ty. btw, saan ka nagpakabit ng central lock with alarm? magkano exact price? ty uli

the central lock with alam was given to me by the dealer. Although the place whee i installed the back up center in banaue also sold the same ones.

Back up sensor php 1500. 2 sensors only
Cental lock and alam 1.6k and alarm is 2.2k

the shop is c3 its on the side of the intersection of q ave and banaue. you will see a mc do on the coner. the shop is just before the third kanto from q ave, fronting a metro bank i believe.

cge let me know when u have the power windows installed.

Wala ba tayong Innova gathering, kahit sa may fort na lang sa may speed zone or mc home depo parking.....

cheers