Toyota Innova Owners & Discussions [ARCHIVED]

[mbt]

number001,

yung CR-V ko ganyan din, the hole in the wheel well is even bigger hehe. and it hasn't really been a problem although i was quite concerned about it before when it was new hehe. these vehicles have been torture-tested extensively before they went to production, if these holes proved to cause premature failures, i doubt the manufacturer would have allowed it to production.

but still, i understand your concern, and if it bothers you, then by all means, have it "fixed" hehe

[jaeger]

A closer look at the problem.....

. . . . Huh?!...neither made sense to me. Plus, neither individuals ever mentioned that the covers were removed for stenciling purposes or even acknowledged the existence of such cover.

Check out this thread on the Fortuner : http://tsikot.yehey.com/forums/showt...5&page=6&pp=10

Looks like summer75 was able to talk to her dealer to have that missing wheel well cover installed. . . . . . "We've discussed this with our dealer already last Thursday and we may have a wheel well cover installed soon"

It was her dealer who admitted that the wheel well cover was removed to facilitate LTO stenciling.

[zechs]

ganun? so if you didnt ask about the wheel well cover, they won't give it back?

[j_avonni]

I will also check with my dealer about the wheel well cover.

[meier]

after reading this forum i finally order my innova this afternoon beige mica metallic g variant from toyota cabanatuan with accesories the salesman said that i can have my ride in 3 weeks time.

congrats *edgarf2804! madadagdagan na naman tayo..

[Innova_Boy]

pls post here if anyone of you were able to claim the wheel well cover. Thanks...

WBR,

[czar_ethan]

anyone here who has gone wiht 10K PMS?
Ano po ung mga ginawa? magkano inabot? Where? Labor fee?

[joem]

I didn't ask for details. Basta ang sabi ko sa kanila na may oil leaks and I wanted it fixed. But I supposed they just tightened the bolts probably in the oil pan.

mine also nag leak.. ang ginawa nila nilagyan nila nang gasket maker..
almost 1 month after na ayos ok na wala nang leak..

[likot]

haaaay oil leak problem dami na case na ganito there's something wrong ba???

[j_avonni]

anyone here who has gone wiht 10K PMS?
Ano po ung mga ginawa? magkano inabot? Where? Labor fee?

Lapit na ako - less than 200 k na lang.