Nissan Frontier Navara [continued]

[jay185]

ano ano ba part number ng mga to

upper control arm bushing
tie rod
tie rod bar
stabilizer link
fan belt short and long

[12vdc]

Sir,
meron ba dito na nag palit na ng HUB ASSY-ROAD WHEEL, FRONT 4WD Nissan Navara 2010. Pareho kaya sila ng Part Code at Part no. ng US Nissan Frontier 2010 (Part Code: 40202M, Part No.: 40202-4X01A)

Part Detail

Maraming salamat.

Sir, afaik yung US D40 madami pang ilalim na iba ang PN# compared with Thai or Spain

From fast hub assy




Problem now is there are numerous PN#'s suffixes, i think you'd better ask the supplier. It should be the hub with ABS sensor and correct offset.

[12vdc]

Uy ano yang application na yan. pwede ko ba makuha yung part number ng upper control arm bushing, tie rod, tie arm, stabilizer link saka sa nispro/nisman lang ba talaga makakakuha ng mga parts naten?

Posted via Tsikot Mobile App

I think i posted the bushing already somewhere, but here's the parts anyway.




Notice the 2models with different stab and stab links, pls check the actual installed in your vehicle. Hindi ko kabisado yung codes sa parts manual..hehe. Yung 2nd pic yung nakakabit sakin.



For the tierods



For Serpentine Belt - 1170-EB70A (7PK-1260)
PS Belt - 11950-EB70A (4PK-820)

Curious lang, ilan na odometer mo? It seems parts are failing too soon. Mine havent experienced those underchassis parts yet stab link OK pa rin. Maybe it has something to do with mostly highway drive? Re OEM parts seller - i think 4 sa Banawe, 3 Sta Cruz, 2 sa Pasay, 2 sa Caloocan. Kung ico-compare sa casa price konti lang difference, nagtatalo na lang kung sino masmabilis magparating ng pyesa from planta.. I've heared mura daw sa Nissan UN..

[rzeraus]

Yong Nissan Navara 2010 galing sa kapatid ko Japan ata yon o pilik mata lang ako, please correct me if i'm wrong. Yes, meron siyang ABS sensor yong offset ang hindi ko alam. Yong isang binigay ng kapatid ko, Timken/Wheel Bearing/Hub Assembly-Front Part Number: SP450702 or SP450701. Sino meron idea kong magkano kaya eto?

Sir 12vdc, you're really are a great help, thank you very much.

[12vdc]

AFAIK D40 Navara are only manufactured in US, MExico, Spain, Thailand (Aus plant shutdown na).

Check your VIN number, if it says MNTBCxxx then its Thai, VSKxxxx is Spain.

No idea with replacement hub, best is to pull it out then compare sa actual para masukat.

[jay185]

I think i posted the bushing already somewhere, but here's the parts anyway.




Notice the 2models with different stab and stab links, pls check the actual installed in your vehicle. Hindi ko kabisado yung codes sa parts manual..hehe. Yung 2nd pic yung nakakabit sakin.



For the tierods



For Serpentine Belt - 1170-EB70A (7PK-1260)
PS Belt - 11950-EB70A (4PK-820)

Curious lang, ilan na odometer mo? It seems parts are failing too soon. Mine havent experienced those underchassis parts yet stab link OK pa rin. Maybe it has something to do with mostly highway drive? Re OEM parts seller - i think 4 sa Banawe, 3 Sta Cruz, 2 sa Pasay, 2 sa Caloocan. Kung ico-compare sa casa price konti lang difference, nagtatalo na lang kung sino masmabilis magparating ng pyesa from planta.. I've heared mura daw sa Nissan UN..

sabi kasi sa aken nung nagkabit ng coil spring ko don kila dr g car clinic, malapit na daw bumigay yung tie rod, tie rod bar, stabilizer link. then sa driver side na upper control arm hindi na lumalaban unlike don sa passenger. so yun :D 73k na sa odometer thanks ulet :D pa pm naman ng cell # mo para pag me mga tanong ako hihihihi

[rzeraus]

Any member here are from Cebu or Tacloban?

Tanong ko lang, meron mga shop kayo na ma recommend other than the Casa, maraming salamat.

[Leo_Arz]

magparating ng pyesa from planta.. I've heared mura daw sa Nissan UN..[/QUOTE]

Base sa experience ko pareho lang ang cost sa parts ng lahat casa nung naghahanap ako parts sa dmf ko nag inquire ko sa Nissan un which dun ko nabili at service ng navara wala man lang discount sa part pareho lang sa alabang , southwoods. Ang me nag bibigay disc sa Mantrade 10% pag dun mo ipagawa at purchase only 15%, sa Nissan gallery best deal na offer sa akin ang disc 13% pag cash & 10% pag card at 10% disc on labor. At iba iba ang charge ng labor bawat casa. Kya maganda mag canvas muna. Lahat naman parts galing planta nagkakatalo lng sila sa mark up. Meron ba tayo dito na independent importer ng parts?



Posted via Tsikot Mobile App

[OJ213]

sir, afaik yung us d40 madami pang ilalim na iba ang pn# compared with thai or spain

from fast hub assy




problem now is there are numerous pn#'s suffixes, i think you'd better ask the supplier. It should be the hub with abs sensor and correct offset.

front hub assy ng 4x4 d40 is available sa advance parts, along taft ave. Near edsa p5500
look for jenny tel # 831 1296
meron ako kasabay nagpalit ng 2 (taiwan made)
if you have any querries tawagan niyo nalang re parts
also they have replacement turbo ng d40 (taiwan made) cost around 25-26k


12vdc , doc 3 sets (big one) yung cross joint for the propeller ,gmb brand and greasable cost 1900*

[OJ213]

GMB BRAND , greasable MADE IN JAPAN

[rzeraus]

I'm really now confused on the offset; wheel offset or the hub offset I have to watched out .

I have lifted from 1010TIRES.COM - Wheel Offset Calculator ....

and here's the Timken replacement hub bearing dimensions for the Navara http://www.timken.com/en-us/products...rOrder7564.pdf

I really appreciate and thankful to Sir 12vdc and Sir OJ213, they really help newbie like me and share their experience and knowledge to the community.

[OJ213]

the available HUB Assy from ADVANCE is stock sir, afaik d40 wheel offset 55mm for 16 x 6j RIMS (4x2 variant) 45mm 16 x 7j RIMS (4x4 variant)

CHECK THIS SITES SIR : https://www.facebook.com/#!/groups/navaraclubph/
Navara Club of the Philippines

[jay185]

20k damage ko sa mga kelangan ko sa suspension... oem lang ba talaga pag bushings, tie rod assembly, serpentine belt?

[Horsepower]

wow, meron na pala ganito ka-advanced (at katino) na discussion. Thanks to 12vdc and OJ and other members. I hope mag-Sylphy din kayo. Marami akong mods na iniisip e. hehe

[jay185]

12vdc, meron ba dito sa aten ang nag prepress ng bushing? saka patulong naman
malaysia upper control arm bushing -200
oem upper control arm bushing -1100

[12vdc]

12vdc, meron ba dito sa aten ang nag prepress ng bushing? saka patulong naman
malaysia upper control arm bushing -200
oem upper control arm bushing -1100

Any 4x4 or suspension shops could do that, but i'd use a G-clamp for DIY pressing. No idea re malaysian and OEM bushings since i havent changed mine..When my time comes, I'd probably order my custom bushings, theres a shop in Sta cruz fabricating anything made from polyurethane they cut it custom sizes..

Bakit pinapapalitan, umiingay na ba or hindi maperfect ang alignment? Normal lang yung malambot wag lang may play sideways.. Pati stab bar papalitan? diba hindi naman nasisira yun, bushing lang saka links ang bumibigay? Ayawmo palitan nalang buong UCA like PRG? para pwede mo na i-lift beyond 2 inches.

20k damage ko sa mga kelangan ko sa suspension... oem lang ba talaga pag bushings, tie rod assembly, serpentine belt?

Pwede naman non-OEM like yung belts sabihin mo lang 4PKxxx may generic sukat na yun. Tierods no idea pero im sure meron na rin non-OEM, just ask around dun sa mga nabanggit na shops.

[12vdc]

Have similar problem nga pala after doing some farm job yesterday.



Didnt notice a huge stone and dead tree while going 10kph in the bushes, lower arm was badly hit.. tsk tsk.

Will fix it in the wheel shop, hindi kaya ng maso eh and pag tinaggal ko, magagalaw alignment ng concentric bolts.
It's producing squaking noise. Prolly will install 2"spacers na rin to give it some clearance.



I managed to install rear comfort shacks, gave me only 1 inch lift..

[12vdc]

GMB BRAND , greasable MADE IN JAPAN

Sir OJ, may part number ka ba nung GMB for future reference? Tuyot na tuyot yung unis mo, good to know madami na aftermarket replacement parts..

[jay185]

Any 4x4 or suspension shops could do that, but i'd use a G-clamp for DIY pressing. No idea re malaysian and OEM bushings since i havent changed mine..When my time comes, I'd probably order my custom bushings, theres a shop in Sta cruz fabricating anything made from polyurethane they cut it custom sizes..

Bakit pinapapalitan, umiingay na ba or hindi maperfect ang alignment? Normal lang yung malambot wag lang may play sideways.. Pati stab bar papalitan? diba hindi naman nasisira yun, bushing lang saka links ang bumibigay? Ayawmo palitan nalang buong UCA like PRG? para pwede mo na i-lift beyond 2 inches.



Pwede naman non-OEM like yung belts sabihin mo lang 4PKxxx may generic sukat na yun. Tierods no idea pero im sure meron na rin non-OEM, just ask around dun sa mga nabanggit na shops.

San meron nyang g clamp? Kaya pinapapalitan yung bushing kasi hindi lumalaban yung uca, walang play sideways yung up and down lang. Pag inangat mo aangat sya pag binaba mo bababa sya not like nung kabila na kahit anong gawin mo lumalaban sya. Yung palitan yung uca iniisip ko rin yan pero ano yang prg, magkano and san nakakabili?

Hindi naman papalitan yung Stab Bar, yung link lang both sides, sama mo na yung tie Rod assembly both inner and outer.

Lastly, wala ata akong nakitang nabanggit na shops o naduduling lang ako.

Posted via Tsikot Mobile App

[79ljb]

Sir 12vdc kamusta yung ride ng nav ninyo nung naikabit yung comfort shackles? Sir saan ninyo nabili at magkano yung comfort shackles? Tia