Mitsubishi Pajero Fieldmaster (Gen 2.5) [ARCHIVED]

[pajerokid]

Naisip ko rin na pwede siguro cutics or paint wala ako mahanap na cutics sa garahe ko.

meron ako boss pero may glitters haha!

[pajerokid]

[quote=CargoBoy;933030]

pics of my weekend project. wurth deadening pads and flashbond.

Any noticeable improvement Sir Promdiboy?
Did you install noise deadening on all flooring - front seat to third seat?

same question PB Also, magkano damage for this. pag kaya, gagawin ko rin sa akin

[pajerokid]

Hi PK,

was able to get hold of the manual, walang instructions doon on how to adjust the beam height of the headlights. tried to adjust using the one at the back of the plastic case of the headlight (with label Up--> Down) .... bumigay/nabali yung screw (parang plastic lang pala din yun).

Anyway, may long vertical screw katabi yung headlight, para san yun? TIA.

melto

check ko mamaya bossing....

nabali?! hmmm as in umiikot na freely yung adjustment screw?

[promdiboy]

Peeps Di ko pa nagamit ng husto after deadening. But when i stomp on the floor i now get a solid thud sound. sa front i used 5 pcs of wurth pads. 2 sa driver and 3 sa passenger. 500 each dito but im sure mas mura diyan sa manila. And 1 roll of flashband sa 2nd row. And 3 rolls sa 3rd row floor and including the wheel arcs. Dinamay ko na pati yung sides ng 3rd row inner and outer shell ( ito lumakas yung kick ng bass ng 6x9 audible talaga to). Flashband 580 each sa suking hardware. still cant comment pag nag drive na. kaya 1 whole day gawin to. Matagal lang magbalik ng seats and panels. Pag binalik na lahat parang walang nangyari.

[melto]

check ko mamaya bossing....

nabali?! hmmm as in umiikot na freely yung adjustment screw?

yup .... na tanggal yung head ng screw sa body ... pero di umiikot freely yung screw, mas naunang bumigay yung head ng screw mula sa body bago lumuwag.

[promdiboy]

andrew, pwede mo subukan irekta yung intercooler fan motor, para matest mo na gumagana pa, may socket naman siya sa gilid na pwede disconnect.

melto, di ko maimagine panno nabali screw head, kasi nung sinagad ko dati yung headlight adjustment iikot parin siya, tapos pipitik pitik lang yung reflector sa loob that means sagad na. and malambot lang siya pihitin kaya di mo siguro mababli yun. baka ibang screw yung sinasabi mo.

[larshell]

meron ako boss pero may glitters haha!

Ha ha ha, Ano kaya ang itsura kung may glitters?

[melto]

melto, di ko maimagine panno nabali screw head, kasi nung sinagad ko dati yung headlight adjustment iikot parin siya, tapos pipitik pitik lang yung reflector sa loob that means sagad na. and malambot lang siya pihitin kaya di mo siguro mababli yun. baka ibang screw yung sinasabi mo.

Hi PB,

baka nga mali yung screw na sinasabi ko .... yun bang sinasabi mo eh yung mahabang metal (vertically positioned) screw sa likod ng headlight assembly? mga 2-3 inches yata yun.

yung tinutukoy ko eh yung screw head (?) na naka lagay mismo (horizontally) sa likod ng plastic casing ng headlight.

thanks for the attention ha............

[pajerokid]

i think nabali mo melto is the headlight alignment screw. this is the one which aligns the whole headlight assembly and not just the reflector.

[melto]

i think nabali mo melto is the headlight alignment screw. this is the one which aligns the whole headlight assembly and not just the reflector.

so as to have a clearer understanding, I attached a pic of the headlight assembly, yung nabali eh yung may "single arrow" on the pic, while is it right to say na yung beam height adjuster pala eh yung may "double arrow"?

[pajerokid]

ah.... i dont think that's it. Ang labo din kasi nung service manual coz partial pic din yung nakalagay, not the whole hadlight assembly.

[melto]

ah.... i dont think that's it. Ang labo din kasi nung service manual coz partial pic din yung nakalagay, not the whole hadlight assembly.

well I guess Promdiboy can help me since he has a first hand experience with its adjustment. Thanks.....

[melto]

well I guess Promdiboy can help me since he has a first hand experience with its adjustment. Thanks.....

I believe this has answered my question, will try at home tonight. I guess what I broke was the "bonnet"

http://www.pocuk.com/forums/viewtopi...ght+adjustment

[promdiboy]

melto yung may double arrow mo ang up and down, nasa other side ng headlight yung left and right, pagtitignan mo yung headlight mo top view, katabi ng hood stopper, merong 3 butas, dalawang bilog at isang oblong, use the screw driver sa toolbox natin, sa isang circle mo ipapasok kapag up and down sa oblong yung left and right.

PK parang gusto ng stock tweeter pod ng pajero natin, kaso di ko pa alam magkano ang kung gaano kalaking tweeters pwede, medyo malaki kasi dls up1c tweeters. baka may alam ka uli makukunan na cheaper,

got to use my pajero kanina, malaking nawala na vibration sa paahan, and whenever i rev the engine nalessen yung vibration and sound ng engine, sa likod di ko pa nasubukan, imho lang, I think yung vibration is most felt sa paa natin lalo na sa mga fellow AT users, kasi parati nasa sahig lang yung left foot natin, pinapakiramdaman ko nga kanina, at idle, meron din vibration sa steering wheel and pag sinandal mo yung elbow sa door handles, i know the vibration is still there, siguro less transmited lang sa mga occupants,

[melto]

Hi PB, please correct me if I'm wrong....

melto yung may double arrow mo ang up and down,

eto eh para sa UP/DOWN ng buong headlight assembly? do I have to loosen any screw before adjusting?

pagtitignan mo yung headlight mo top view, katabi ng hood stopper, merong 3 butas, dalawang bilog at isang oblong, use the screw driver sa toolbox natin, sa isang circle mo ipapasok kapag up and down sa oblong yung left and right.

eto eh para sa UP/DOWN ng reflector sa loob ng assembly?

pasensya na ha kung nag da-drag yung mga tanong ko.

[pajerokid]

PK parang gusto ng stock tweeter pod ng pajero natin, kaso di ko pa alam magkano ang kung gaano kalaking tweeters pwede, medyo malaki kasi dls up1c tweeters. baka may alam ka uli makukunan na cheaper,

got to use my pajero kanina, malaking nawala na vibration sa paahan, and whenever i rev the engine nalessen yung vibration and sound ng engine, sa likod di ko pa nasubukan, imho lang, I think yung vibration is most felt sa paa natin lalo na sa mga fellow AT users, kasi parati nasa sahig lang yung left foot natin, pinapakiramdaman ko nga kanina, at idle, meron din vibration sa steering wheel and pag sinandal mo yung elbow sa door handles, i know the vibration is still there, siguro less transmited lang sa mga occupants,

yung tweeter pod, meron akong nakita nito na mura, problem is i cant remember where. Meron nito sa SP international pero im sure mas mahal.

congrats on your project PB!!! parang gusto ko rin subukan hehe. Ganong katagal inabot yung buong process? 1 day din siguro kung DIy no?

[promdiboy]

melto, hirap kasi explain, saksak mo lang yung screw driver sa butas like sa picture, nakapasok na yan iikutin nalang,

Attachment 9919
up and down

Attachment 9920
left and right


PK 3 hours tapos na first and 2nd row, meron ako nakita sa kac for sale section, dynamat extreme, ito ang pinaka ok daw na deadening mat, sayang nahuli lang sana ganyan na gagamitin ko. yung 3rd row medyo matagal dahil sa panels. if ever maalala mo yung tweeter pods, pa post naman saan meron, thanks PK.

[melto]

was finally able to adjust the beam height last night ..... thanks for the patience PK and PB.

[rtp]

Mga Bossing,

Tanong ko lang kung talaga bang nasa right-hand side yung switch ng headlight ng pajero at nasa left naman ang wiper? Local Gen II (96 model) ang rig ko.

Thanks!!!

[promdiboy]

rtp parang baliktad yata,