Mitsubishi Pajero Fieldmaster (Gen 2.5) [ARCHIVED]

[badsekktor]

hey guys! i need a replacement fan motor for my intercooler... the small aux fan for my condenser went bust, so i had the one for my intercooler in place, the motor is exactly the same... now i dont have a motor for the fan on my intercooler

surplus fans costs 2.5k, a brandnew japan replacement is 3.5k... i'm looking for something cheaper.. lets say 500 any conversion ideas???

btw, sunog ang old motor.. so change carbon ai'nt a solution

tia!

bro try mo sa mga aircon shops! got mine replaced around 1200 yata or 1800 yun price nung buong assembly kasama yun fan, motor saka yun mount.

pajero gurus, ask ko lang din kung pwede ba i-adjust yun gas pedal ng pajero? i mean yun pagka-lambot nya? sa gf ko yun pajero. 2nd hand, currently acquired. ok naman humatak. yun nga lang extra effort yun pagtapak sa gas unlike nung sa kin.

[badsekktor]

follow up question... madami na ko nai-drive na pajero pero yun sa akin eh hindi kasing lambot nung ibang nai-drive ko. sabi nung friend ko may i-aadjust daw sa power steering? any info about this? alam ko naman gumagana yun power steering ko pero iba pa rin yun malambot. Yun sa isa kong tropa grabe sa sobrang lambot. Standing still yun ride nya pero pag hinatak mo yun manibela at binitiwan nagtuturn yun gulong just by letting go of the steering wheel

[nugundam93]

dudee: imo, oo. pero in city driving, ok naman. andyan naman autoplus to bump up the power by about 33% or so...pero dagdag usok. :D

larshell: yup, sensor na yung 6G74. someone has done a 4m41 swap to the gen1 sa south africa, and computed total cost niya was equivalent to like 800K petot dito.

badsekktor, baka naman sa engine condition na yun?

[badsekktor]

badsekktor, baka naman sa engine condition na yun?

malabong engine condition bro pero double check ko na lang din. anyway tnx for the input

[larshell]

larshell: yup, sensor na yung 6G74. someone has done a 4m41 swap to the gen1 sa south africa, and computed total cost niya was equivalent to like 800K petot dito.

Ngek! ang mahal ng 4m41. Ayoko kasi di kaya presyo. May nakita na utol ko sa Japan na 6g74 and 6g72, kabado lang ako sa 6G74 baka may complikasyon sa convertion and ang layo ng gastos compare to 4m41.

Ano kaya maganda 6G72 or 6G74? Kasi same price lang sila sa japan. Kaya lang baka mahirapan ako sa convertion to 6G74.

Advice naman mga tol.

[oliver1013]

Babagay kaya gen 3 mags sa gen 2.5?

[OTEP]

GEN III alloy wheels will not fit earlier models. The center hole is not large enough to accomodate the GEN II.5's hubs.

[nugundam93]

almost same consumption ng 72 and 74 eh...and comparably speaking, mas matakaw si 72. :D

[nyll]

Originally Posted by Otep
GEN III alloy wheels will not fit earlier models. The center hole is not large enough to accomodate the GEN II.5's hubs.

Parang pwede ang Gen III alloy wheels sa Gen 2.5. Kasi si Joseph (Pajero expert) used Gen III alloy wheels in his Gen 2.5.

[OTEP]

Try to check. Tinanong ko kasi dati sa 4x4wire. Was also interested in said swap.