House Constuction [Merged]

**Walter** · October 2nd, 2020 05:00 PM

Grout perhaps? ...

**travajante** · October 2nd, 2020 05:46 PM

Originally Posted by JohnM

Bai is there a sealant preferably in a spray can that I can use to seal this concrete? Our sink is sandwiched between a concrete slab and granite top and there seems to be a gap that lets water through from the edges.

Sent from my SM-A605G using Tapatalk

There should be a gap between top & concrete....use nothing less than Polyurethane Seal(not silicone). Preparation is key. Area should be clean of grease/dirt & dry prior to application. Sika, Bostik, even Pioneer now have em. Cure time must properly be observed. Liquid, i.e. Thompson's, won't likely work.

Sent from my SM-G970F using Tapatalk

**StockEngine** · October 2nd, 2020 07:04 PM

How much would it cost to change a pivoting door with a sliding door? Is this allowed in condos?

**dr. d** · October 2nd, 2020 07:08 PM

Originally Posted by StockEngine

How much would it cost to change a pivoting door with a sliding door? Is this allowed in condos?

you should best check with condo administration, on what you may do and may not do, to your own unit.
cost: i do not know. sorry.

**Walter** · October 3rd, 2020 08:00 AM

*travs
Are you a building contractor?

**EQAddict** · October 3rd, 2020 08:22 AM

Yeah same question.... and where r u based

Sent from my SM-N975F using Tapatalk

**travajante** · October 3rd, 2020 10:27 AM

Originally Posted by Walter

*travs
Are you a building contractor?

That sounds generically large. Just part of a small team of tech/craftspeople who still share that sense of foolish idealism, sir. Today's industry bar has been set more towards commerce than Standards like it should've always remained....A rarity to see builders build like it were their own now.
Hope this helps to be understood better why I still shy away from CVTs.[emoji4]

Originally Posted by EQAddict

Yeah same question.... and where r u based

Sent from my SM-N975F using Tapatalk

Bisdak country, sir.[emoji120]

Sent from my SM-G970F using Tapatalk

**StockEngine** · October 3rd, 2020 10:39 AM

Originally Posted by travajante

That sounds generically large. Just part of a small team of tech/craftspeople who still share that sense of foolish idealism, sir. Today's industry bar has been set more towards commerce than Standards like it should've always remained....A rarity to see builders build like it were their own now.
Hope this helps to be understood better why I still shy away from CVTs.[emoji4]Bisdak country, sir.[emoji120]

Sent from my SM-G970F using Tapatalk

One of the most entertaining tiktoks is from this Certified Professional Inspector - Inspector AJ

Vast knowledge 🤯🤯🤯

**CVT** · October 6th, 2020 06:16 PM

Originally Posted by EQAddict

Well. Was against my principles but we matched the highest offer and since the seller's SPA and broker is my good friend, they will sell to us.

Money will never grow talaga in the bank. And you need nerves of steel to play stocks nowadays. So am biting the bullet and will pay their price.

Build and sell for the first time for me and my wife. Usually i just focus on rentables for capital gain and some cashflow. This will be the 1st one that i am buying just to flip. Its a 400sqm property beside my village. Will try to build a duplex.

Gonna keep my eyes glued on this thread for ideas.

Sent from my SM-N975F using Tapatalk

It won't depreciate bro...