2014 Mazda 3

[testament11]

Anybody tried 20s on stock height?

Is this workable w/o any rubbing issues even on a full load?

Am eyeing some nice shoes but only avail on 20s.

May nakasubok sa grupo. May rubbing na ito sa fender on stock height.

[travajante]

Anybody tried 20s on stock height?

Is this workable w/o any rubbing issues even on a full load?

Am eyeing some nice shoes but only avail on 20s.

Share your wheel fitment specs, we'll see if they can be kept w/in stock total diameter, sir. You might need to go 30-35% profile.

[vinrem]

Anybody tried 20s on stock height?

Is this workable w/o any rubbing issues even on a full load?

Am eyeing some nice shoes but only avail on 20s.

Baka sobrang rough ang ride nito sir ah.

[Geo_S]

Sharing photos of Mz3s on Tein Htech:




According to my buddy, he can attest that ride quality is the same as stock springs. The Htechs just minimized the fender gaps on our Mz3s.

Thanks Mast3r JaM3s for hooking us up!!!

[travajante]

Sharing photos of Mz3s on Tein Htech:

According to my buddy, he can attest that ride quality is the same as stock springs. The Htechs just minimized the fender gaps on our Mz3s.

Beautiful Birds of the TEIN Feather!!!!
Grats, brothahs!!!!🙏👏👍

[justdiy]

Witweew!

[Geo_S]

Witweew!

Thanks bro. Ano kelan na release ng Mz3 hatch mo? Nakakatulog ka pa ba?? Hahaha. Pag nakuha mo na, meetup tayo ng iba pang fellow Mz3 tsikoteers. 😊

[marcyaptinchay]

Review: Tein Htech 96-98% stock yung feel , naiiba lang pag dumaan ka sa panget na hump , yung almost triangle na tapos an taas , (a bit of stiffness) but on normal roads and lubak walang tagtag (stock is medyo matagtag to begin with ) you will not notice too much of a difference (unless you really look for it then maybe you will notice a bit of stiffness)

[marcyaptinchay]

[marcyaptinchay]

[justdiy]

Thanks bro. Ano kelan na release ng Mz3 hatch mo? Nakakatulog ka pa ba?? Hahaha. Pag nakuha mo na, meetup tayo ng iba pang fellow Mz3 tsikoteers. ��

Bukas na sir!!! hahahaha! nakakatulog ako kasi nagpapagod ako through exercise. hehehe. mamaya sana makatulog ako!

Tara, tsikoteers EB! heheh!

- - - - - - - - - - - - - - - - - - - - - -

Thanks bro. Ano kelan na release ng Mz3 hatch mo? Nakakatulog ka pa ba?? Hahaha. Pag nakuha mo na, meetup tayo ng iba pang fellow Mz3 tsikoteers. 😊

Bukas na sir!!! hahahaha! nakakatulog ako kasi nagpapagod ako through exercise. hehehe. mamaya sana makatulog ako!

Tara, tsikoteers EB! heheh!

[vinrem]

Bukas na sir!!! hahahaha! nakakatulog ako kasi nagpapagod ako through exercise. hehehe. mamaya sana makatulog ako!

Tara, tsikoteers EB! heheh!

- - - - - - - - - - - - - - - - - - - - - -



Bukas na sir!!! hahahaha! nakakatulog ako kasi nagpapagod ako through exercise. hehehe. mamaya sana makatulog ako!

Tara, tsikoteers EB! heheh!

Hahaha isang tulog na lng pala!!! Di ka na makakatulog nyan mamayang gabi.

[justdiy]

Hahaha isang tulog na lng pala!!! Di ka na makakatulog nyan mamayang gabi.

Hehehe, kumakabog dibdib ko sa sobrang excitement. Kaka-email lang sakin ng unit details.

- - - - - - - - - - - - - - - - - - - - - -

Hahaha isang tulog na lng pala!!! Di ka na makakatulog nyan mamayang gabi.

Hehehe, kumakabog dibdib ko sa sobrang excitement. Kaka-email lang sakin ng unit details.

[Geo_S]

Bukas na sir!!! hahahaha! nakakatulog ako kasi nagpapagod ako through exercise. hehehe. mamaya sana makatulog ako!

Tara, tsikoteers EB! heheh!

- - - - - - - - - - - - - - - - - - - - - -



Bukas na sir!!! hahahaha! nakakatulog ako kasi nagpapagod ako through exercise. hehehe. mamaya sana makatulog ako!

Tara, tsikoteers EB! heheh!

Congrats!! Sure na. Di ka na makakatulog. Haha.

[travajante]

Review: Tein Htech 96-98% stock yung feel , naiiba lang pag dumaan ka sa panget na hump , yung almost triangle na tapos an taas , (a bit of stiffness) but on normal roads and lubak walang tagtag (stock is medyo matagtag to begin with ) you will not notice too much of a difference (unless you really look for it then maybe you will notice a bit of stiffness)

In other words....PERFECT!!!!👍

Such a beauty...Misaki!

Aching to see the next project happen!

[travajante]

Bukas na sir!!! hahahaha! nakakatulog ako kasi nagpapagod ako through exercise. hehehe. mamaya sana makatulog ako!

Grats & good luck to your attempt at sleep, justdiy sir!!!

[justdiy]

Hahaha! thanks sirs! I'm just so excited for this!

BTW, can someone hook me up for my insurance? My broker told me the insurance co. needs 3 days before they can give the policy. Can't wait any longer. I'm also only available for the release, tomorrow.

The insurance company is only asking 22,235; 2k participation fee. While others ask for around 29k; 5% participation fee.

If you know anyone, please text me here 0917 737 2958

[Geo_S]

Hahaha! thanks sirs! I'm just so excited for this!

BTW, can someone hook me up for my insurance? My broker told me the insurance co. needs 3 days before they can give the policy. Can't wait any longer. I'm also only available for the release, tomorrow.

The insurance company is only asking 22,235; 2k participation fee. While others ask for around 29k; 5% participation fee.

If you know anyone, please text me here 0917 737 2958

It's already a great deal bro. I had mine for 29k with 2k participation. If yours is only 22k with 2k participation, then wait for your policy. Whats the insurance company btw? Mine is Mapfre.

[travajante]

A tastefully tweaked Soul Red...
Happily RELOCATED!!!!


For Plate Relocators,
please email
satravajante*gmail.com

Thanks!!!!

[justdiy]

It's already a great deal bro. I had mine for 29k with 2k participation. If yours is only 22k with 2k participation, then wait for your policy. Whats the insurance company btw? Mine is Mapfre.

The 23k premium is from Mercantile Insurance. Mura nga.. Sana pumayag ang dealer/bank dun sa ibibigay ni broker na certificate of full force and effect ng insurance. Hehehe