Results 2,051 to 2,060 of 5235
-
April 4th, 2007 10:05 PM #2051
-
BANNED BANNED BANNED
- Join Date
- Oct 2002
- Posts
- 3,790
April 5th, 2007 04:43 AM #2052You can relocate the jack and tools underneath the passenger seats, then you'll have enough space for another.
-
April 5th, 2007 07:27 AM #2053
-
April 7th, 2007 10:17 PM #2054
I saw the AVT subs, self amplified pala ito at manipis - ideal for pickups talaga. Its around 8k sa banawe. I forgot the name of the shop. katabi ng Intense audio
pede rin yan under the front seats. maybe install one under the driver and another under the front passenger
-
Tsikot Member Rank 4
- Join Date
- Oct 2004
- Posts
- 2,315
April 8th, 2007 11:44 PM #2055kay autodresscode ko binili yun lamps. Naadjust siya. You could turn it from left to right and tilt it up and down. I forgot the brand. Nakakita ako sa concorde nito at iba pa mga car accessory shops mas mura pa dun compared sa binilihan ko. Pero kasama na kabit nun pag bili ko at relay.
Wala shadow kasi may rollerup ako.
-
Verified Tsikot Member
- Join Date
- Sep 2005
- Posts
- 71
April 9th, 2007 12:02 AM #2056Paano pala ma-access yung likod ng HU. I still have the stock Clarion in my Dmax and I plan to plug RCA plugs in the AUX so I can use my Ipod.
I want to DIY it if possible since I don't have a trusted shop to do this, baka puro gasgas sa dashboard ang mangyari. After that I could put in the AVT sub http://tsikot.yehey.com/forums/images/smilies/agree.gif
-
April 9th, 2007 08:19 AM #2057
-
April 9th, 2007 10:23 AM #2058
-
BANNED BANNED BANNED
- Join Date
- Oct 2002
- Posts
- 3,790
April 9th, 2007 02:40 PM #2059Walang screw na kakalasin para makalas ang front panel ng HU!
To disable the airbag...ang sabi ng CASA technician ko ay kalasin ang SRS Fuse in the fuse box. Use the white fuse remover to remove the fuse and use the fuse guide in the cover to determine where the SRS fuse is located.
Remove SRS Fuse
To remove the HU front panel:
Step 1
Remove the ashtray and then you will notice a "tab-like protursion"...hold it with your thumb and index finger then jerk it out (huwag masyadong malakas).
Step 2
Anchor your fingers underneath the cigarette lighter portion and jerk it out.
There are 7 "holding clamps"...step 1 and 2 removed the first two lowest position clamps.
Step 3
My picture shows only one hand kasi the other hand was taking picture...you can use two hands on opposite sides.
Step 4
Position the hands higher then jerk it out again...
Step 5
The top part will remove the last remaining clamp sa gitna (located sa itaas ng hazard light switch).
By this time accessible na ang screws ng HU.
-
April 9th, 2007 04:26 PM #2060
guys,
yun knob pang switch ng FAn ng aircon niyo, maluwag ba talaga kung inaalog? Kasi sakin maluwag.
Couldn't have explained it better myself. This was the point I was making. They (either manually or...
SC (temporarily) stops NCAP