Remote bypass oil filtration

**Ry_Tower** · December 12th, 2018 11:52 AM

Originally Posted by leoblack9

Would a Donaldson P550335 or a Baldwin Bt223 filter last for atleast 15,000kms when paired with a very stout oil like a Mobil Delvac 1 5w40?

Pretty much everywhere I've read consistent UOAs online that it maintains its TBN at 10,000miles (15~16k kms) and since its also the most expensive diesel oil out there it just feels wasteful to change it out early since I racked up 10,000kms in under 7 months.

Yes pwede if not so polluted or dusty or the driving is not rated as severe. If it is, best to keep it at 10,000kms between OCI.

**ripple_effect** · January 15th, 2019 04:50 AM

good day! can someone kindly confirm that using this oil / oil filter combo, Mobil Delvac MX 15W40 and Baldwin B113 can be used up to 10,000 kms as OCI? Thanks. Also, is Donaldson a good fuel filter? my engine is Isuzu 4JH1-TC.

Thanks!

**Athrunzala** · February 2nd, 2019 11:08 PM

**oj88** · February 3rd, 2019 06:31 AM

Originally Posted by Athrunzala

He lost all credibility when he said he’s comparing between the “least expensive conventional oil filter to the most expensive fully-synthetic oil filter”.

**attyallanlatras** · February 3rd, 2019 04:42 PM

What is the Baldwin oil filter for Fortuner 2016 Diesel? What about for Innova 2008 gas? Pareho lang ba?

**12vdc** · February 3rd, 2019 05:19 PM

^ 1KD/2KD, 1GD/2GD, 2TR engines use the tiny BT233. You may want to cross-ref OE PN#s at Baldwin site just to be sure.

**attyallanlatras** · February 4th, 2019 07:20 AM

Originally Posted by 12vdc

^ 1KD/2KD, 1GD/2GD, 2TR engines use the tiny BT233. You may want to cross-ref OE PN#s at Baldwin site just to be sure.

Sir, I read that Baldwin B2 a bigger oil filter may also be used. Is this so?

What about MANN W940 High Performance, is this also a good filter for Toyota Fortuner and Innova?

**12vdc** · February 4th, 2019 08:23 AM

Erratum to my previous, should be BT223.

Originally Posted by attyallanlatras

Sir, I read that Baldwin B2 a bigger oil filter may also be used. Is this so?

What about MANN W940 High Performance, is this also a good filter for Toyota Fortuner and Innova?

Yes you may as long as the thread,gaskets are the same and it fits in the engine, and bypass valve is within specs. Basic principle is the bigger the better because of larger filtering media surface area, filtration is a straightforward/exact science.

**attyallanlatras** · February 4th, 2019 04:07 PM

Originally Posted by 12vdc

Erratum to my previous, should be BT223.

Yes you may as long as the thread,gaskets are the same and it fits in the engine, and bypass valve is within specs. Basic principle is the bigger the better because of larger filtering media surface area, filtration is a straightforward/exact science.

Toyota 90915-YZZD2
Baldwin BT223
Donaldson P550335
Baldwin B243^
Donaldson P550400^

Baldwin B1405
Baldwin B178^
Donaldson P554770^

^ long version

Got the above from my back reads here. How would I be able to verify if the above reference number would fit or be equivalent to toyota oil filter for fortuner?

**12vdc** · February 4th, 2019 04:19 PM

BT223 or similar-sized should fit without problems, but if you will upgrade- buy some samples or measure the actual vertical clearance to determine if it will fit in the engine without hitting any hose/accessories.

Sometimes the thread of the spin-on adapter has stand-pipe that you need more clearance for the ing/egress of the filter. Or the diameter won't fit because the spin-on adapter has a lip or the oil cooler does not allow you to go bigger than the OEM. Try backreading more for 2KD who upgraded to bigger filters.