Quote Originally Posted by dvldoc View Post
*tuazon7
I think you have the wrong part OEM part number these are the ones for Mitshubishi

MITSUBISHI MB220900
MITSUBISHI 34462-01041
MITSUBISHI MB248213
MITSUBISHI 34462-21040




It should be the BF7534 and even the Fleetguard site verifies it's for the 4D56, 4M40

Descriptions: Fuel/Water Separator Spin-on with Threaded Port
Notes: Inside-Out Flow Direction
Contains: Port Thread: M36 x 1.5
Fits: Chevrolet, Dodge, GMC, Isuzu, Mitsubishi Automotive, Light-Duty Trucks; Toro Lawn & Garden Tractors
Replaces: GMC 13240032; Isuzu 8-94483-850-0; Mitsubishi MB228988; Toro 60-5470
Thread: M20 x 1.5
O.D.: 3 9/16 (90.5)
Length: 5 7/16 (138.1)
F. Gskt.: [2] Included

The BF7535 is for Toyota's and Nissans with a 3/4 16 thread.


The JS filter site does say BF7534 as well, for the 4d56, 4m40 ect.

It also fits Isuzu 4JB1-t, 4JG2-T Engines in the Bighorn, and all 2.5 liter non common rail Starexes vans, Kia Pregio vans with the 2.5 and 2.7 engines. 02-05 kia Carens with 2.0 liter engine and all Kia Carnival/Sedona vans, and Kia Besta vans.

The 4M41 uses a BF7842.
Doc, thanks for the inputs. Really know that all are using the BF7534 and it is the one that Volmax insist for the 4D56. But had my old PMS ivoice checked and had asked Citimotors as well and they provided the same OEM P/N. Checked the actual and it is a Denso 186100-6080 but no luck on getting information on this on the net. Maybe you have something on this. TIA.