Medyo OT, but since this thread is all about oil filtration just want to ask you guys about this engine treatment:
Power Oil Philippines - The Technology Of Engine Efficiency
30K kms oil change, improvement in FC as much as 30-50%, etc., medyo mukang too good to be true
That's just a scam product. Unless they invented a new element on the periodic table. Your first clues should have been this.
Things to look out for first these key words.
Nanotechnology (gimmick statement)
Multi-molecular magnetic oil film (gimmick statement)
Testimonioals (scam dead give away)
Thermal Stabilizers (gimmick statement)
Polar Hydrocarbon (gimmick statement)
saves fuel 20% to 50% (also total bs)
Additive increases power 25% (total bs)
dynamically reduces Carbon Monoxide emissions up to 75% (no additive will do this period)
Suspect Emmision test certificates that are older than the company (you ever get a cert that looked like that?)
Test data not consistant with a engine oil anylisis from Caterpillar (that's not how a test result from CAT comes out, It shows what's in the fluid and the parts per million as well as the viscosity and total base number.
There is no additive that will extend your oils life to 30000K PERIOD.
And get ready the Devils about to lay the smack down on these scam artist.
The biggest part of the scam is when they steal another companies logo and make claims under their name.
Poweroil does not claim any of this stuff from there products nor do they sell a additive. They sell automotive and motorcycle oil good old dyno stuff and synthetic.
Power Oil - High Tech Schmierstoffe you can translate it with this Free Website Translator. Online Website Translation
The company is just ripping people off and causing harm to engines.
Lets see what happens when I email them about this company using there logo and making these claims.
Your vehicle is normally your second most expensive personal item, it makes me sick when people will sell things like this that could cause harm to your vehicle just to make a buck. I hate scams and fake products as you might have noticed.
you can start here dvldoc since you are a member also.
http://4x4ph.com/forum/index.php?showtopic=126805&hl=
Dad bought BD28s from Volmax this afternoon. Is it normal that they are not wrapped in plastic?
![]()
Baldwins are not wrapped in plastic, they are just individually boxed. And that is the real deal, tons better than a VIC which does not filter even half as well. Hopefully Volmax knows the growing demand for these and orders more.
Volmax, pretty much has all real Baldwin. They just need to stock more general use filter for everyday vehicles vs commercial vehicles, But they are getting the point now of what people want.
And in case they read this thread they need stock more of these
B34's Nissan Navara, Frontiers, Urvans, ect.
BT223 All toyota 4 cly and 6 cly, including D4D engines almost all 1999 and down nissan 4cly gas.
BD28 4M40, 4D56, 4M41
B1402 (all honda 4 and 6 cly gas engines)
BT292 (Elgrand, Vanttee, Largo
LF3528 (crosswinds)
Those are some they should start with if they want to pull in some big bucks. Just some suggestions guys![]()
*edtf, confused here on the correct part number for the Baldwin fuel filter for the MS. Based on the Baldwin and JS Filters cross reference, it should be BF7535 instead of BF7534. Main difference on these two is on the thread dimension. OEM P/N is 1770A053. Please help as had not purchased yet the fuel filter because of this. TIA.
the BF7534 fits both 4d56 and 4m41.....I just had mine installed this afternoon and a friends strada's 4d56 2 weeks ago...![]()
*tuazon7
I think you have the wrong part OEM part number these are the ones for Mitshubishi
MITSUBISHI MB220900
MITSUBISHI 34462-01041
MITSUBISHI MB248213
MITSUBISHI 34462-21040
It should be the BF7534 and even the Fleetguard site verifies it's for the 4D56, 4M40
Descriptions: Fuel/Water Separator Spin-on with Threaded Port
Notes: Inside-Out Flow Direction
Contains: Port Thread: M36 x 1.5
Fits: Chevrolet, Dodge, GMC, Isuzu, Mitsubishi Automotive, Light-Duty Trucks; Toro Lawn & Garden Tractors
Replaces: GMC 13240032; Isuzu 8-94483-850-0; Mitsubishi MB228988; Toro 60-5470
Thread: M20 x 1.5
O.D.: 3 9/16 (90.5)
Length: 5 7/16 (138.1)
F. Gskt.: [2] Included
The BF7535 is for Toyota's and Nissans with a 3/4 16 thread.
The JS filter site does say BF7534 as well, for the 4d56, 4m40 ect.
It also fits Isuzu 4JB1-t, 4JG2-T Engines in the Bighorn, and all 2.5 liter non common rail Starexes vans, Kia Pregio vans with the 2.5 and 2.7 engines. 02-05 kia Carens with 2.0 liter engine and all Kia Carnival/Sedona vans, and Kia Besta vans.
The 4M41 uses a BF7842.