Welcome to all owners of Toyota Fortuner [ARCHIVED]

[number001]

hehehe dont know wat im doing.... just want to share to u guys some pix....
meron cinabi ung agent ko na bawal daw mabasa ung computer box san ba makikita un??? alam u naman dito sa aurora konting ulan lang ung bundok nami grabe putik at ilog kaya im quite kabado dun sa mababasa......

According to an article in TopGear Philippines (Nov 2005 issue, pg 57), "....its computer box mounted on the cabin floor, making water crossings a tricky and possibly expensive undertaking...."

[vicoyski]

According to an article in TopGear Philippines (Nov 2005 issue, pg 57), "....its computer box mounted on the cabin floor, making water crossings a tricky and possibly expensive undertaking...."

[jaeger]

. . . . By the way, how is your friend doing with the attempts to fabricate a wheel well guard for the IMVs?

We shelved the project. The direct cost (liner + fastener) will come out to over P200. At this price baka wala nang bumili kasi to everyone's eyes this is only a piece of plastic so why should it cost over P200.- ?

The only material available in Binondo is PVC (poly-vinyl-chloride) which costs P120/kilo. 1 roll is 45ki. with 24" width and 100m length - the bad part is the available thickness is only 0.2~0.5mm. (tooo thin). For the liner, we need at least 2.0mm.

I was hoping *allenjo's friend with the plastic factory can spare some scraps which we may be able to use (para libre na yung material) so we just share in the cost of the mold and pay the vacu-form outfit per press made.

So far, dead end - no material available. The big plastic factories are buying up all the available supply of PE and HDPE in the market.

[vicoyski]

We shelved the project. The direct cost (liner + fastener) will come out to over P200. At this price baka wala nang bumili kasi to everyone's eyes this is only a piece of plastic so why should it cost over P200.- ?

The only material available in Binondo is PVC (poly-vinyl-chloride) which costs P120/kilo. 1 roll is 45ki. with 24" width and 100m length - the bad part is the available thickness is only 0.2~0.5mm. (tooo thin). For the liner, we need at least 2.0mm.

I was hoping *allenjo's friend with the plastic factory can spare some scraps which we may be able to use (para libre na yung material) so we just share in the cost of the mold and pay the vacu-form outfit per press made.

So far, dead end - no material available. The big plastic factories are buying up all the available supply of PE and HDPE in the market.

I think very reasonable pa rin kung below P500 per piece. Kung set of 4 wheel well covers, around P2T...

[jaeger]

According to an article in TopGear Philippines (Nov 2005 issue, pg 57), "....its computer box mounted on the cabin floor, making water crossings a tricky and possibly expensive undertaking...."

Please check - this might not be accurate. In my Innova, the ECU (Engine Control Unit or computer box) is located way above the cabin floor. It's inside the dashboard, placed beside the passenger side A-pillar behind the glove box. Next to it is the blower fan assembly of the aircon.

Since the Fortuner shares the same IMV design philosophy, your ECU might be in the same place. You can flood your cabin up to a foot deep with water and your ECU will still be above it. However, you may have sensors slaved to the ECU which are mounted in the engine/tranny very low and these sensors may short when submerged.



You can easily locate your ECU - Just use a flashlight and peek behind the glove box from under the dash - it's a metal box the size of a hard disk drive with lots of wires plugged into it and there's a big sticker on its side with the label "ENGINE CONTROL" . If you spot it - that's it.

This is what is typically inside an ECU:



.

[number001]

I quoted the magazine article verbatim. TOPGEAR Philippines Nov 2005 page 57.

[Pilgrim]

Jaeger:

I am running a Belgian thermoforming company here in Laguna. I use a lot of APET (0.3 - 1.1 mm thickness). some HDPE (1 mm x 560 mm) and Polystyrene ( max 1.8 mm thick x 540 mm wide - Green). What do you exactly need to explore this?

I cant withdraw from my stocks (i might be accused of using my authority for personal gain) but I usually can get a few kilos of sample from the a supplier. A meter of Polystyrene in the size I gave is about 1.05 Kilos. I would have offered my toolshop but its not ethical : )

Suppose you can make this, how are you going to produce the volume without material supply? Even my company imports everything. : (

[iwc]

what store in banaue? orig kaya yan?

[attynorby]

Re wheel well cover, if we could have a survey/order list so that we can help the "manufacturer" in computing his profit margin, say, for this number of orders, how much must he sell the cover. Also to assure him of the demand, at least, from the members of this forum.

[vicoyski]

We've got 30 confirmed Fortuner owners here in this thread. I'm sure all of them would be interested.

[cesar]

How does this GSM security device work? Matra-track mo using your cellphone kung san napunta yung car mo kapag na-carjack to? Astig yun ah, sana mas exact yung location, d lang yung name ng city...

U got PM!

[bilog]

Fortuner Owners

1. summer75 - 2.7G VVTi, Silver Metallic
2. Monseratto - 3.0V D4D, Silver Metallic
3. andre - 2.7G VVTi, Silver Metallic
4. trader - 2.7G VVTi, Black Mica
5. vicoyski - 3.0V D4D, Silver Metallic
6. lara - 2.7G VVTi, Silver Metallic
7. jackaroo - 3.0V D4D, Dark Gray Mica Metallic
8. hyperev - 3.0V D4D, Black Mica
9. spiff41398 - 3.0V D4D, Silver Metallic
10. Forza – 3.0V D4D, Super White II
11. jad - 3.0V D4D, Silver Metallic
12. fortfan - 2.7G VVTi, Silver Metallic
13. greenlight - 2.7G VVTi, Silver Metallic
14. fortuner13 - 2.5G D4D, Black Mica
15. toadstool - 3.0V D4D, Silver Metallic
16. JunDC – 3.0V D4D, Dark Gray Mica Metallic
17. retinasurgeon - 2.7G VVTi, Black Mica
18. allenjo - 2.5G D4D, Dark Gray
19. patron - 2.5G D4D, Black Mica
20. magikels - 2.7 vvti Extreme Black
21. Pilgrim - 3.0V D4D, Black Mica
22. Kurosaki Ichigo - 3.0V D4D, Dark Grey Mica Metallic
23. attynorby - 2.5G D4D, Silver Metallic
24. big_jo - 2.5G D4D, Silver Metallic
25. seanjedi - 3.0V D4D, Black Mica
26.kent - 2.5G D4D , dark gray
27. liliputman - 3.0V D4D, Brown Metallic
28. Ram_001 - 2.5G D4D, Grayish Brown Metallic
29. tocloy – 2.5 G D4D, Grayish Brown Metallic
30. bilog - 2.7 G vvti super white

Future Fortuner Owners (tsikoteers):

1. Bry – 2.5G White
2. bigbrother - 2.7G Dark Gray
3. hector angel - 2.7G Black or White
4. keisuke - 2.7G Black or Dark Gray
5. -
6. Vmax - 3.0V Dark Gray
7. Onestab - 3.0V Black
8. 4wrider - 2.7G Dark Gray Metallic or Brown Metallic
9. kmo - 2.7G Silver or Dark Gray
10. beebs – 2.7G any color (going 6 mos waiting)
11. wilcats - 2.7G Black or Dark Gray
12. franci_rod – 2.7G Silver Metallic

[bilog]

finally my long wait is over... legitimate na pag post ko dito sa thread na ito.

[number001]

finally my long wait is over... legitimate na pag post ko dito sa thread na ito.

congrats! how about some pics?

btw, which dealer?

[bilog]

will post pictures tomorrow... dilim na sa garahe, cellphone lang gamit ko.

got my unit from toyota batangas. I also have a unit reservation with pasong tamo. Halos sabay sila tumawag but toyota batangas gave me a good deal. In house Insurance lang inavail ko and leather seats.

[mechanixx]

pls add me name mechanixx hir got mine thursday afternoon cabanatuan 3.0v metallic brown?

[mechanixx]

d me maka post ngaun pix dont know wats the problem

[number001]

Fortuner Owners

1. summer75 - 2.7G VVTi, Silver Metallic
2. Monseratto - 3.0V D4D, Silver Metallic
3. andre - 2.7G VVTi, Silver Metallic
4. trader - 2.7G VVTi, Black Mica
5. vicoyski - 3.0V D4D, Silver Metallic
6. lara - 2.7G VVTi, Silver Metallic
7. jackaroo - 3.0V D4D, Dark Gray Mica Metallic
8. hyperev - 3.0V D4D, Black Mica
9. spiff41398 - 3.0V D4D, Silver Metallic
10. Forza – 3.0V D4D, Super White II
11. jad - 3.0V D4D, Silver Metallic
12. fortfan - 2.7G VVTi, Silver Metallic
13. greenlight - 2.7G VVTi, Silver Metallic
14. fortuner13 - 2.5G D4D, Black Mica
15. toadstool - 3.0V D4D, Silver Metallic
16. JunDC – 3.0V D4D, Dark Gray Mica Metallic
17. retinasurgeon - 2.7G VVTi, Black Mica
18. allenjo - 2.5G D4D, Dark Gray
19. patron - 2.5G D4D, Black Mica
20. magikels - 2.7 vvti Extreme Black
21. Pilgrim - 3.0V D4D, Black Mica
22. Kurosaki Ichigo - 3.0V D4D, Dark Grey Mica Metallic
23. attynorby - 2.5G D4D, Silver Metallic
24. big_jo - 2.5G D4D, Silver Metallic
25. seanjedi - 3.0V D4D, Black Mica
26.kent - 2.5G D4D , dark gray
27. liliputman - 3.0V D4D, Brown Metallic
28. Ram_001 - 2.5G D4D, Grayish Brown Metallic
29. tocloy – 2.5 G D4D, Grayish Brown Metallic
30. bilog - 2.7 G vvti super white
31. mechanixx - 3.0V D4D, Grayish Brown Metallic

Future Fortuner Owners (tsikoteers):

1. Bry – 2.5G White
2. bigbrother - 2.7G Dark Gray
3. hector angel - 2.7G Black or White
4. keisuke - 2.7G Black or Dark Gray
5. -
6. Vmax - 3.0V Dark Gray
7. Onestab - 3.0V Black
8. 4wrider - 2.7G Dark Gray Metallic or Brown Metallic
9. kmo - 2.7G Silver or Dark Gray
10. beebs – 2.7G any color (going 6 mos waiting)
11. wilcats - 2.7G Black or Dark Gray
12. franci_rod – 2.7G Silver Metallic

[jaeger]

Jaeger:

Suppose you can make this, how are you going to produce the volume without material supply? Even my company imports everything. : (

That's precisely our problem - no materials supply, so we shelved it. Will your company accept small quantity sub-con jobs? The mold should be available so lower yung product development cost. Honestly, I don't know where to start - someone's got to offer his Fortuner so we can make a paper mache mold which we can use to make a wood or metal master mold from which to thermally press the HDPE into.

If we had the Thai part then we can just resin-cast the mold. The methods we use are very basic - just following scale modelling vacu-form molding principles.

[mechanixx]

sarap ng gising ko......