Originally Posted by vicoyski
ok no problem.i guess i have to remove the hu and take a look myself. thanks.
Originally Posted by vicoyski
ok no problem.i guess i have to remove the hu and take a look myself. thanks.
Pre check your gear maybe its on d3 not d4 coz mine 2.7 vvti run 17+kph at 38++ rpm.. no problem....Originally Posted by monpogi
Originally Posted by bigbrother
Sayang.....may mga sobrang Raybrig na H4 pa ako.![]()
Using the stock bulbs, makikita mo pa ba ang daan sa gabi kapag naka tint ang windshield mo?
Nagpalit ka ba? Ano ipinalit mo? at magkano? Thanks for the reply.
Also experience the same at high speed. I am sure it comes from the aircon.Originally Posted by konde
my tint is 3m dark in front n super dark on all windows xcept the windshield,Originally Posted by skyking
i've change my dim n bright with raybrig n polarg, n didnt changed the fog lamp. but i noticed that the fog lamp is more clearer than the one that with raybrig n polarg coz of its kelvin...
Originally Posted by bigbrother
Did you change the sockets to ceramic din? or ceramic na ang nasa Fortuner?
Just came back after spending the whole day at Tagaytay, the fortuner was a blast to drive, averaged 9.5 km/lit this time. Saw close to 10 fortuners parked along the restaurants near yellow cab pizza. I'd like to improve the performance of my original head unit, what should I install? I want it to have more power and "substance". Thanks in advance guys.
[QUOTE]Just came back after spending the whole day at Tagaytay, the fortuner was a blast to drive, averaged 9.5 km/lit this time. Saw close to 10 fortuners parked along the restaurants near yellow cab pizza. I'd like to improve the performance of my original head unit, what should I install? I want it to have more power and "substance". Thanks in advance guys.
Did you try changing the presets to "van"? This setting at least firm-up the sound together with some readjustments on bass and treble.
Enjoy your ride.
sorry pre but i didnt notice if the socket where changed or not,,, i'll check it 2morow or 2...Originally Posted by skyking
Originally Posted by trader
i tested this kanina sa SLEX. i turned off the aircon 10 mins before i sped to 120kph. tas nangamoy pangkulot nga. so i conclude that it isnt the aircon![]()
Originally Posted by monpogi
Hmmm... Mukhang marami dito ang sanay magpa-kulot at alam amoy ng pang-kulot ah...![]()
But, seriously, have that checked... Why is it so common? Sa VVTi variants lang ba? What about the D-4Ds?![]()
parang na amoy ko na din to twice coming from tagaytay. i thought it was from the exhaust of other cars. Sir vic, D4D yung sakin.
here are some mock-ups of my h/k. i plan to have the wire dangling from the display pass thru the uppermost corner slot of the aircon vent. tried it above the rearview mirror pero nakaka-duling . for the control i might drill a small hole for a cleaner look.
![]()
Originally Posted by sean jedi
Confirmed nga na may smell. I remember smelling it also the 1st and 2nd time I breached 160kph. Never smelled it since then, 'coz I mostly maintain a speed of 100kph and below for fuel economy purposes.
If the smell is common in both the D-4D & VVTi variants, hindi yan sa engine. Might be coming from the wheel wells. But, why is the smell wafting through to the cabin?
*sean jedi: You can actually route the H/K wire through the dash and inside the center console. Madali bunutin by hand yun dashboard cover surrounding the HU and the Climate Control Unit. You can hide the H/K brain under the HU behind the dashboard.
Hi sean_jedi, vicoyski,
Interesting suggestions about the display placement and wiring via the aircon vent. I pulled the dashboard cover to check out the wiring route and it's a relatively simple setup -- from the vent, the wiring can pass through behind the dashboard to the HK brain.
I finally moved my display from the left side to the center dashboad.
I also moved the joint connection of the the display to the top-most screw point so that the display be placed lower to further hide the wire.
Cheers!
nx01
Hello,
Anyone found this on the manual or knows what the "black button" on the dashboard is (near the front vents) -- there's wire that leads to it underneath.
(Apologies in advance if this has been answered before)
Cheers!
![]()
Originally Posted by nx01
That's the light sensor for the climate control
*nx01 - I also moved the joint connection of the the display to the top-most screw point so that the display be placed lower to further hide the wire.
am worried that condensation might build up inside the screen with part of the aircon vent partially blocked.(from your pics, the first slot is blocked). try what i did. better a little wire showing than ruining your display![]()