Nissan Vanette [Merged threads]

[shauskie]

Mga sir good day,

nabsa ko ung mga post nyo about sa diesel converted na nissan vanette, i have a question. Kapag ba nagpalit ka ng radiator ng vanette ilang rows ba dapat? ang stock ko po eh 2 rows pero tumataas temp nya lalu na pag on ung ac, pero habang tumatakbo or inaapakn ung silinyador namemaintain nya ung temp na di maxadong mataas. Meron po bang existing na radiator na 4 rows for vanette? parepareho po ba ang size ng radiator?

sir lee, you may try this link: ...http://ph.88db.com/Automotive/Repair...ce/ad-66281/1/ pwede magtanong ng presyo ng kahit anong parts ng nissan sa kanila online. about the radiator, browse nyo yung thread, dated june.

[shauskie]

ot - pano po magdelete ng sariling post? (incase na-double post lang)

[CVT]

^^^ We do not have the power to do it bro.... Just leave it there or if you have the chance,- just erase what you wrote earlier and write "sorry, double post..."...

Happens to me occasionally, especially when the site is sooooooo sllloooooowwwwww.....

9404:vader:

[Surfee]

salamat sa reply mga sir. . . i'll bring my vannette to my favorite and trusted shop. . . hehe pa tune up and change oil ko na to. . .

try ko patipirin sa gas tong vanette ko. . . then if sucessful ung project ko i'll post it here kung ano mga nagwa para mashare ntn sa mge fellow nakavanette for us not to change engine anymore hehehe. . .

[CVT]

Yup, and if there is a way that we can modify the fuel line system et al to be 100% compatible with E10, for peace of mind....TIA.

9404:vader:

[=NismO=]

tnx sa mga replies guys...

1 more thing, kasi ayaw ko pa-overhaul yung radiator ko, is there an alternative way para malinis yung radiator like flushing? ano ma rerecomend nyo na brand na pang flush. and ano magandang coolant? tnx...

[CVT]

I have not encountered any radiator flushing solution bro. I am sure there are out there, but I was not looking for them.

I usually run the engine while I run water through the radiator, by loosening the stopper at the bottom. Right now I am using Prestone coolant, either pre-mixed, or pure with 50% distilled water....

9505:spam:

[shauskie]

tnx sa mga replies guys...

1 more thing, kasi ayaw ko pa-overhaul yung radiator ko, is there an alternative way para malinis yung radiator like flushing? ano ma rerecomend nyo na brand na pang flush. and ano magandang coolant? tnx...

any brand of radiator coolant ok. design naman sila lahat for cooling system. sakin minsan pagnaglilinis ako ng rad - whiz, prestone or waxco. about rad flushing...pagnakita mo na yung mga putikputik sa loob ng rad..yun ang hindi kayang tunawin ng mga radiator flush..mas maganda pa ring magpabaklas ng radiator..

[Surfee]

gudam mga sir. . . do you happen to know the rigt valve clearance or tappet of our Z20 engine vanette? please i need to know. . . balak ko kasi check kung tama pa clearance or tappets ng vanette ko . . . kasi ang alam ko one factor din ung tappet sa gas consumption ng engine. . . thx in advance. . ..

[=NismO=]

ask ko lng san ba yung water reserve for radiator? hehehe hindi ko kasi makita. hehehe