All New 2017 Mazda 3

**Archerfish** · January 28th, 2020 09:29 PM

Originally Posted by StockEngine

Confirm if the caliper pin slides in and out. If it doesnt they used grease that's not meant for brakes(high temp) This needs to be cleaned out. It takes awhile cleaning this. Once the job is finished the pins should move in and out smoothly.

That's right. I got a dose of it. They used ordinary grease and couldn't complain. I think I should not be within the vicinity as they perform the maintenance. However, I want my hands to get dirty once in awhile. Or a while?
[emoji3]

On my next visit, I brought my own. It's Permatex, thanks to this forum and to all helpful members.

**travajante** · January 28th, 2020 09:35 PM

Originally Posted by jaytecson_

Hi Thread!

I have been following this thread since last year and this January 2020. (I read from first post back in 2016 to this date - 396 pages whew!) just finished today and caught up now with the thread so I am posting now. [emoji4]

I was able to purchased a used 2017 mazda 3 speed with only 12k odo for I would say a good price.

A lot of helpful mowners especially to sir travajante and jojopad and all contributors here which I would like to thank much.

From this thread. I was able to purchase the plate relocator to having the apple carplay installed. Just wanna share my
Next mod maybe the streaming signal lights on my side mirrors with autofold when locked on my keyfob by mikstore. Hopefully this weekends.(once new side mirrors installed by casa)

Racing beat axleback exhaust (I emailed sir *travajante for it and not sure if he sells or distribute it here in PH)

I also learned the ceramic coating option here from technical details which I am already scheduled this 30-31st of January.

Issues so far is the mirrors not folding completely but scheduled for replacement by mazda makati.

Groaning when turning left during low speed 10kmph. Havent figured it out and casa has no idea. [emoji17]

So far, minor issues and enjoying every bit of the 3.

Again, Thank you to this forum! Mown3rs rock!

Sent from my iPhone using Tapatalk

Grats on that prized find, sir! Glad you're happy![emoji106]
Won't that angle-adjusting holder bring the plate too low to risk dragging it on bumps/ramps? Or pic is just deceiving. [emoji4]
That noise on full left was an early-build issue that affected some '13-'15 CX5s, 6s & BM 3s. Long been addressed by an old Service Bulletin way back. Your '17, already a BN, shouldn't have the pre-updated noise-making inner ball joint. Perhaps you can ask the dealership to verify.

Sent from my SM-G970F using Tapatalk

**travajante** · January 28th, 2020 09:41 PM

Originally Posted by jaytecson_

Oh wow! Good to know that I can get the defective mirrors from the casa. Thanks for the tip!

Sent from my iPhone using Tapatalk

Warranty replaced parts are supposed to be sent back to MazdaPh. That celebrity privilege might just have been exclusively extended to our Brother Bossing(Archerfish)......but you can try asking, sir.[emoji4]

Sent from my SM-G970F using Tapatalk

**jaytecson_** · January 28th, 2020 10:45 PM

Originally Posted by travajante

Grats on that prized find, sir! Glad you're happy![emoji106]
Won't that angle-adjusting holder bring the plate too low to risk dragging it on bumps/ramps? Or pic is just deceiving. [emoji4]
That noise on full left was an early-build issue that affected some '13-'15 CX5s, 6s & BM 3s. Long been addressed by an old Service Bulletin way back. Your '17, already a BN, shouldn't have the pre-updated noise-making inner ball joint. Perhaps you can ask the dealership to verify.

Sent from my SM-G970F using Tapatalk

It is indeed low but I drive around Makati-BGC and had a lot of dragging instances [emoji28] will move it a bit up this weekends.

I’ll sure to ask the dealership about it. Thanks!
I emailed you btw re: RB exhaust.

Sent from my iPhone using Tapatalk

**jaytecson_** · January 28th, 2020 10:47 PM

Originally Posted by travajante

Warranty replaced parts are supposed to be sent back to MazdaPh. That celebrity privilege might just have been exclusively extended to our Brother Bossing(Archerfish)......but you can try asking, sir.[emoji4]

Sent from my SM-G970F using Tapatalk

I will probably need to push my luck harder when I visit the casa to get the defective part. [emoji28]

Sent from my iPhone using Tapatalk

**Archerfish** · January 28th, 2020 10:53 PM

Originally Posted by travajante

Warranty replaced parts are supposed to be sent back to MazdaPh. That celebrity privilege might just have been exclusively extended to our Brother Bossing(Archerfish)......but you can try asking, sir.[emoji4]

Sent from my SM-G970F using Tapatalk

I don't know but somehow I get favorable responses from them. I even have the damaged rim last time I claimed from insurance. It has a small "dimple".

I don't think it is already compromised so I plan to use it as a spare tire but I have to meet first the right guy who will do the work. It doesn't fit inside the trunk.

**travajante** · January 28th, 2020 10:56 PM

Originally Posted by Archerfish

I don't know but somehow I get favorable responses from them. I even have the damaged rim last time I claimed from insurance. It has a small "dimple".

I don't think it is already compromised so I plan to use it as a spare tire but I have to meet first the right guy who will do the work. It doesn't fit inside the trunk.

Ahhh...insurance & warranty claims are 2 different animals, brother. Pest & pet, respectively.[emoji4]

Sent from my SM-G970F using Tapatalk

**travajante** · January 28th, 2020 10:58 PM

Originally Posted by jaytecson_

I will probably need to push my luck harder when I visit the casa to get the defective part. [emoji28]

Sent from my iPhone using Tapatalk

Or....try not to go full left. Easy skill to learn.[emoji4]

Sent from my SM-G970F using Tapatalk

**carrera_911** · January 30th, 2020 07:39 PM

battery malfunction system with blinking istop error shows up yesterday. charged it overnight with CTEK. nawala na yung error but istop still not working. no green logo while driving. do i need to reset istop? Not using istop so not sure if need pa ireset.

anyway i know mahina na battery nito but will not replace it yet until hindi na mag start ang car. if i am not using istop, do i really need the agm/efb battery? or regular batts will do.

**travajante** · January 31st, 2020 12:20 AM

Originally Posted by carrera_911

battery malfunction system with blinking istop error shows up yesterday. charged it overnight with CTEK. nawala na yung error but istop still not working. no green logo while driving. do i need to reset istop? Not using istop so not sure if need pa ireset.

anyway i know mahina na battery nito but will not replace it yet until hindi na mag start ang car. if i am not using istop, do i really need the agm/efb battery? or regular batts will do.

Go Panasonic or Delkor EFB. Prices are now friendlier.

Sent from my SM-G970F using Tapatalk

**carrera_911** · January 31st, 2020 01:34 AM

Originally Posted by travajante

Go Panasonic or Delkor EFB. Prices are now friendlier.

Sent from my SM-G970F using Tapatalk

Where to buy sir?

**ninjababez** · January 31st, 2020 06:43 AM

Originally Posted by travajante

Go Panasonic or Delkor EFB. Prices are now friendlier.

Sent from my SM-G970F using Tapatalk

pwedeng pwede ito kay dr.d

**jojopad** · January 31st, 2020 06:56 AM

Originally Posted by carrera_911

Where to buy sir?

Yuasa 95D23L/Q85
₱14,500 2 years warranty
iStop reset charge ₱2128 (Mazda Makati)

~

Panasonic Q90
₱10,800 15 months warranty
TPL Industries
Delivery hotline 0925 611 7755
134 West Avenue

~

Optima YellowTop D35
OPTIMA Batteries (Philippines) - Motor Vehicle Company - Quezon City, Philippines - 2,835 Photos | Facebook
Tel # 374 6302
₱17,500 2 years warranty

**travajante** · January 31st, 2020 08:22 AM

Originally Posted by jojopad

Yuasa 95D23L/Q85
₱14,500 2 years warranty
iStop reset charge ₱2128 (Mazda Makati)

~

Panasonic Q90
₱10,800 15 months warranty
TPL Industries
Delivery hotline 0925 611 7755
134 West Avenue

~

Optima YellowTop D35
OPTIMA Batteries (Philippines) - Motor Vehicle Company - Quezon City, Philippines - 2,835 Photos | Facebook
Tel # 374 6302
₱17,500 2 years warranty

[emoji106]

Sent from my SM-G970F using Tapatalk

**Archerfish** · January 31st, 2020 04:05 PM

Originally Posted by jojopad

Yuasa 95D23L/Q85
₱14,500 2 years warranty
iStop reset charge ₱2128 (Mazda Makati)

~

Panasonic Q90
₱10,800 15 months warranty
TPL Industries
Delivery hotline 0925 611 7755
134 West Avenue

~

Optima YellowTop D35
OPTIMA Batteries (Philippines) - Motor Vehicle Company - Quezon City, Philippines - 2,835 Photos | Facebook
Tel # 374 6302
₱17,500 2 years warranty

Is there a "bookmark function" on this site? I'd like to save this...

Then again, I can simply take a screenshot. [emoji3]

**jojopad** · January 31st, 2020 04:15 PM

Originally Posted by Archerfish

Is there a "bookmark function" on this site? I'd like to save this...

Then again, I can simply take a screenshot. [emoji3]

What I do is copy the text and save it at my phone's memo app [emoji12]

**carrera_911** · January 31st, 2020 04:57 PM

Originally Posted by jojopad

Yuasa 95D23L/Q85
₱14,500 2 years warranty
iStop reset charge ₱2128 (Mazda Makati)

~

Panasonic Q90
₱10,800 15 months warranty
TPL Industries
Delivery hotline 0925 611 7755
134 West Avenue

~

Optima YellowTop D35
OPTIMA Batteries (Philippines) - Motor Vehicle Company - Quezon City, Philippines - 2,835 Photos | Facebook
Tel # 374 6302
₱17,500 2 years warranty

Thanks sir! Appreciate it.

**buknoii** · February 2nd, 2020 01:22 PM

Hi guys! Im selling my Mazda 3 1.5. Only 35k - 38k milage.. 580K . RFS not using it anymore. Migrated kasi

Sent from my SM-N960F using Tapatalk

**papi smith** · February 2nd, 2020 02:36 PM

What year?

**buknoii** · February 3rd, 2020 02:51 AM

Originally Posted by papi smith

What year?

2017..

Sent from my SM-N960F using Tapatalk

The Largest Car Forum in the Philippines

All New 2017 Mazda 3

Thread Tools

Search Thread

Display

Tags for this Thread