2014 Mazda 3

[vinrem]

I mean baka yan yung speaker ng reverse sensor.

Sent from my SM-A605G using Tapatalk

Ah ok hehehe


Sent from my ONEPLUS A6003 using Tapatalk

[JohnM]

Sinilip ko kanina yung area ng jack. May rubber louvers sa wall which is part of the venting system para di pumutok tenga mo when you close the door. Otherwise wala akong nakitang horn. Could be in a different location depending sa pinanggalingang factory.

[vinrem]

Sinilip ko kanina yung area ng jack. May rubber louvers sa wall which is part of the venting system para di pumutok tenga mo when you close the door. Otherwise wala akong nakitang horn. Could be in a different location depending sa pinanggalingang factory.

It's in your left hand side sir, left side of the jack, you need to open the cover to see it, anyway, baka nga back up sensor lang un hehehe

Sent from my ONEPLUS A6003 using Tapatalk

[JohnM]

It's in your left hand side sir, left side of the jack, you need to open the cover to see it, anyway, baka nga back up sensor lang un hehehe

Ah sige will check that out kung magpalit na rin ako ng bulbs. Ang alam ko kasi the BCM for the reverse cam is on the driver side of the trunk wall.

[vinrem]

Ah sige will check that out kung magpalit na rin ako ng bulbs. Ang alam ko kasi the BCM for the reverse cam is on the driver side of the trunk wall.

When replacing your turn signal to an LED, you need to buy a canbus para you won't get an error sa dash, yung brake light and reverse light no need to add na, turn signal lang, I haven't replaced my turn signal yet kasi walang sabitan or a place to put the canbus sa area na yun, I'm still studying kung saan pwde ko isabit kaya na open ko ang area na yun and saw an additional horn.

Sent from my ONEPLUS A6003 using Tapatalk

[JohnM]

When replacing your turn signal to an LED, you need to buy a canbus para you won't get an error sa dash, yung brake light and reverse light no need to add na, turn signal lang, I haven't replaced my turn signal yet kasi walang sabitan or a place to put the canbus sa area na yun, I'm still studying kung saan pwde ko isabit kaya na open ko ang area na yun and saw an additional horn.

Yep I already asked one of the HID upgrade shops dito re the turn signal. 6k ata ang quote nya for the canbus system. Gone are the days na palit socket lang may always on corner light ka na

[vinrem]

Yep I already asked one of the HID upgrade shops dito re the turn signal. 6k ata ang quote nya for the canbus system. Gone are the days na palit socket lang may always on corner light ka na

Wow, 6k, I bought it at only 120rmb for set of 2 in taobao, yun nga lang, I have to install it by myself pero madali lng naman, problem is where to place it kasi wala akong nakikitang lugar where I can clamp the canbus.

Sent from my ONEPLUS A6003 using Tapatalk

[vinrem]

Ah sige will check that out kung magpalit na rin ako ng bulbs. Ang alam ko kasi the BCM for the reverse cam is on the driver side of the trunk wall.

Sir, ito ang sinasabi ko, ano kaya ito?

Sent from my ONEPLUS A6003 using Tapatalk

[Yatta]

^looks like a horn...

Sent from my SM-T825Y using Tapatalk

[vinrem]

^looks like a horn...

Sent from my SM-T825Y using Tapatalk

Yeah sir, but the thing is, it's at the back of the car.

Sent from my ONEPLUS A6003 using Tapatalk

[Yatta]

Could be the warning horn for a proximity sensor? have you tried honking your horn to hear if it sounds off? I once modded my car to have extra horns at the back for pesky tail-gaters.

[vinrem]

Could be the warning horn for a proximity sensor? have you tried honking your horn to hear if it sounds off? I once modded my car to have extra horns at the back for pesky tail-gaters.

Hahaha, didn't try it, sige try ko na lng, baka nga back up sensor.

Sent from my ONEPLUS A6003 using Tapatalk

[vinrem]

Yung backup beeping sound is coming from the front door and not the back.

Question lang, when you guys lock and unlock your door, does it beep?

Sent from my ONEPLUS A6003 using Tapatalk

[JohnM]

Yung backup beeping sound is coming from the front door and not the back.

Question lang, when you guys lock and unlock your door, does it beep?

Sent from my ONEPLUS A6003 using Tapatalk

Nada.

Planning to install the push button lock/unlock door handles soon like what the 2.0 has

[Yatta]

Yung backup beeping sound is coming from the front door and not the back.

Question lang, when you guys lock and unlock your door, does it beep?

Sent from my ONEPLUS A6003 using Tapatalk

I mean press the horn button and listen of the back horn sounds.

[vinrem]

I mean press the horn button and listen of the back horn sounds.

I already pressed the horn and walang tunog sa likod.

Sent from my ONEPLUS A6003 using Tapatalk

[Yatta]

I already pressed the horn and walang tunog sa likod.

Sent from my ONEPLUS A6003 using Tapatalk

Does the MAzda 3 have a factory alarm system? It could be part of it.

[squall88]

Hi guys. I know not an excuse pero I've been really busy lately and I missed my next scheduled PMS ko na supposed na July this year. Ever since natapos kasi ung Yojin 3 ko last December, hindi ko na talaga siya naasikaso, my bad . So now it's been 3 to 4 months late na. May bad effect kaya ito sa engine na. Any recommendation sa case ko? Also , any recomendation kung saan ko na siya maganda pa PMS. Mass recommended pa rin ba sa casa or may alternative, na probably mas cheaper. And I think this time ako na mag-buy ng sarili kong oil na mas better sa in-house nila na ginagamit?

And lastly, I keep on receiving text from different mazda branches about Special Service Program (SSP) that in includes BCM (body control module) replacement to the most current specification. Should I avail that?

Thank you in advance

[travajante]

Hi guys. I know not an excuse pero I've been really busy lately and I missed my next scheduled PMS ko na supposed na July this year. Ever since natapos kasi ung Yojin 3 ko last December, hindi ko na talaga siya naasikaso, my bad . So now it's been 3 to 4 months late na. May bad effect kaya ito sa engine na. Any recommendation sa case ko? Also , any recomendation kung saan ko na siya maganda pa PMS. Mass recommended pa rin ba sa casa or may alternative, na probably mas cheaper. And I think this time ako na mag-buy ng sarili kong oil na mas better sa in-house nila na ginagamit?

And lastly, I keep on receiving text from different mazda branches about Special Service Program (SSP) that in includes BCM (body control module) replacement to the most current specification. Should I avail that?

Thank you in advance

You worry too much.[emoji4] It's just like missing your annual health check up...make it up. You can opt in or off casa service now that Yojin is done. I DIY our other cars but have found our lone local dealership rates reasonable...I still let em. My service records are official & complete. Useful should 1 have issues that could be addressed by warranty. Still on Shell Helix Pro 5w-30 here....since new.
On the BCM...If you've been notified, then your VIN is part of the recall. It's wiper control system related. You won't wanna lose wiper function in the midst of some thunderstorm deep in the night, would yah?[emoji4]....Oh, that's free, by the way, sir.

Sent from my SM-G970F using Tapatalk

[Youncle]

Hi! Pa-OT mga sir, glad to have an active thread for Mazda BM/BN owners here in PH

I just bought a 2015 2.0R last month and I have some issues with it.

Clunking noise - whenever I drive on bumpy roads, I hear a clunking noise (metal) at the front. Nawala naman after my PMS and bolt tightening but after a long drive from the province and bad roads in Manila area bumalik ulit.

Has anyone here experienced this issue? I'm guessing its the front end links?

Mechanics told me in my last PMS that all bushings are ok.

Mileage is 35k.

Road noise - Maybe because its sitting on lowprofile tires and based on what I read from other forums problem daw talaga ng BM/BN ito?

Hope to hear! Thanks.