2014 Mazda 3

[bhybhoy]

You can still start the car. The battery is just to lock and unlock the doors. It doesnt use the battery to start the car. May chip siya sa loob. Thats what my SA told me.

okay po thanks sa reply

mazda is almost 2weeks old now,is it still needs to apply undercoat for rust protection?
especially now rainy season.

thanks

[testament11]

okay po thanks sa reply

mazda is almost 2weeks old now,is it still needs to apply undercoat for rust protection?
especially now rainy season.

thanks

No need. Very well protected ang sasakyan natin sa ilalim by plastics. Kung masisilip mo nga, covered yun ilalim niya

[Walter]

Undercoating is just a scheme by dealers to earn more. It's not necessary anymore.

[kimbon]

No need. Very well protected ang sasakyan natin sa ilalim by plastics. Kung masisilip mo nga, covered yun ilalim niya

may part lang ba na covered ng plastic ang undercarriage o buo ito na parang ganito ? TIA



- - - - - - - - - - - - - - - - - - - - - -

No need. Very well protected ang sasakyan natin sa ilalim by plastics. Kung masisilip mo nga, covered yun ilalim niya

may part lang ba na covered ng plastic ang undercarriage o buo ito na parang ganito ? TIA

[justdiy]

Here's an interesting blog: Inspecting the Mazda 3

Inspecting the 2014 Mazda Mazda3 - The Car Guide

- - - - - - - - - - - - - - - - - - - - - -

Here's an interesting blog: Inspecting the Mazda 3

http://www.guideautoweb.com/en/articles/23713/inspecting-the-2014-mazda-mazda3/

[bhybhoy]

Thanks po sa reply
Sa mga nka 1.5 medyo hirap po ba paakyat un car sa akin po kase pansin ko hirap sya paakyat like sa mall parking need ko pa diinan ung pedal more than half unlike sa honda city 1.5 medyo wala pa sa kalahati lng ung diin nakakaakyat naman
Pasensya na po maraming tanong 😊

[Louie Anson Ng]

may part lang ba na covered ng plastic ang undercarriage o buo ito na parang ganito ? TIA



- - - - - - - - - - - - - - - - - - - - - -



may part lang ba na covered ng plastic ang undercarriage o buo ito na parang ganito ? TIA

Buo yung covered area, kaya nawalan ng silbe pinarating naming engine undercovers nakatakip na pala

[bhybhoy]

[QUOTE=bhybhoy;2559527]Thanks po sa reply
Sa mga nka 1.5 medyo hirap po ba paakyat un car sa akin po kase pansin ko hirap sya paakyat like sa mall parking need ko pa diinan ung pedal more than half unlike sa honda city 1.5 medyo wala pa sa kalahati lng ung diin nakakaakyat naman
Pasensya na po maraming tanong
sorry iba ung smiley nalagay celfon lng gamit

[jazz0821]

guys noob question lang, kung magpapa install ng tint kagad sa new car, di ba nila papatungan un conduction sticker?

[go-to-guy]

guys noob question lang, kung magpapa install ng tint kagad sa new car, di ba nila papatungan un conduction sticker?

Nasa labas naman conduction sticker and the tint is installed inside

[Louie Anson Ng]

Thanks po sa reply
Sa mga nka 1.5 medyo hirap po ba paakyat un car sa akin po kase pansin ko hirap sya paakyat like sa mall parking need ko pa diinan ung pedal more than half unlike sa honda city 1.5 medyo wala pa sa kalahati lng ung diin nakakaakyat naman
Pasensya na po maraming tanong ��

Mas madiin ako umapak sa Fiesta namin na 1.5 kaysa sa Mazda 3, pero kung cocompare mo rin kasi mas mabigat talaga ang kaha ng M3 compared sa City (1300 to 1165) kaya acceptable lang na mas malakas ang iaaapak sa M3

- - - - - - - - - - - - - - - - - - - - - -

Thanks po sa reply
Sa mga nka 1.5 medyo hirap po ba paakyat un car sa akin po kase pansin ko hirap sya paakyat like sa mall parking need ko pa diinan ung pedal more than half unlike sa honda city 1.5 medyo wala pa sa kalahati lng ung diin nakakaakyat naman
Pasensya na po maraming tanong 😊

Mas madiin ako umapak sa Fiesta namin na 1.5 kaysa sa Mazda 3, pero kung cocompare mo rin kasi mas mabigat talaga ang kaha ng M3 compared sa City (1300 to 1165) kaya acceptable lang na mas malakas ang iaaapak sa M3

[bhybhoy]

thanks po

[jcal68]

Mga sirs kasya ba si vossen cv5 (18x8 5x114 e40) sa mz3 natin without any issue?

Yup. I saw M3's with 18 x 8 with et 40 on 225 x 45's.

[travajante]

Mga sirs kasya ba si vossen cv5 (18x8 5x114 e40) sa mz3 natin without any issue?

Stay et45 up & play w/ spacers, sir, in case you'd succumb to the temptation of lowering.

[mang_pogs]

got my mz3 2.0 serviced * alabang for 20T km. As usual had a great experience. very accomodating sila even Late ak 1hr. Took around 2hrs before ak nkalabas ng casa. Didnt pay anything as well. Ang kulang lang cgro is the list of things na ginawa nila but the s.a said i can request for it next time. As for fuel consumption, mine is 7.8li/100km.

After Mazda went straight to atc and saw the new honda hrv mugen edition. Quite a looker too but a bit pricey (1.5million with just 1.8 engine).

There's a new mazda dealership and service center * sta rosa laguna, just across paseo. anyone here tried their service?

[Slip]

Hi guys this thread is very informative just finish back reading it took me awhile 300+ page. well it's worth it and knowing everybody here exchange information and help each other. Reading just made me more excited on my incoming car i just hope everything go smoothly. as i read no one mention they acquire a Mazda 3 at Mazda North Edsa? Hope to join the Club ASAP.

[jazz0821]

^ yup agree with you slip, ako din waiting for my unit nalang from Quezon Ave naman. sobrang ok un thread naten dito sa mazda 3 daming willing tumulong.

[garcescraig]

Yup. I saw M3's with 18 x 8 with et 40 on 225 x 45's.

Stay et45 up & play w/ spacers, sir, in case you'd succumb to the temptation of lowering.

Points well taken sirs. My follow up questions:

(1) wala bang issue with with 5x114 lug pattern granting na dapat 5x114.3 dapat?

(2) since wala naman akong plans to lower the car, does that mean that i can go down all the way to et35?

Many thanks!

[travajante]

5x114 is just short for 114.3 or 4.5". So, no issues there. Et35 is 15mm outwards of factory et50. Expect rubbing, unless you stretch tires & apply ample negative hind camber.

[macsd]

After Mazda went straight to atc and saw the new honda hrv mugen edition. Quite a looker too but a bit pricey (1.5million with just 1.8 engine).

There's a new mazda dealership and service center * sta rosa laguna, just across paseo. anyone here tried their service?

Yup, saw that HRV display at ATC yesterday as well. Now i'm having second thought whether to switch may order of M3 2.0R since waiting pa rin to the HRV L. Wifey & bunso is making kulit for HRV.

My order of M3 is at Sta Rosa. Known my SA & service head there since Ford Alabang days. Very supportive sila at madaling kausap, just go straight to the point.