2014 Mazda 3

[travajante]

Installed scuff plate on door sills.. from mikstore



Repaired my hood.. using a polyurethane adhesive..



Also hired a dent removal specialist to remove some dent on the hood.. there is a noticeable bump on the hood and according to the repair guy, a ball must've hit hard the passenger side causing the adhesive to giveway..

Also i examined the adhesive used.. and i think its not that strong to hold the wide hood

Good job, sir....What's next?[emoji4]

Sent from my SM-G970F using Tapatalk

[yapoy86]

Good job, sir....What's next?[emoji4]

Sent from my SM-G970F using Tapatalk

Happy to report that my hood is now more sturdy.. hehe.. before it theres too much flex and everytime i wipe the hood.. it bends and boom! Will install the hood insulator and struts tomorrow

[travajante]

Happy to report that my hood is now more sturdy.. hehe.. before it theres too much flex and everytime i wipe the hood.. it bends and boom! Will install the hood insulator and struts tomorrow

So, the ball was the culprit.
Good mod plans.[emoji106] Insulator silences, but keeps engine heat in the bay longer.

Sent from my SM-G970F using Tapatalk

[JohnM]

Finally bit the bullet and got the headlights upgraded with bixenon HIDs. HB3 high beam and park light bulbs were also replaced with LEDs to keep it all white up front.

Bad trip lang because the "bright white" halogen H11s I bought for the fogs are still yellowish. Lazada time.

All in the name of safety of course. Rainy season etc etc.

Sent from my SM-A605G using Tapatalk

[yapoy86]

Installed hood insulator and hood dampers


Changed brake fluid to DOT4

[babkalakal]

Installed hood insulator and hood dampers


Changed brake fluid to DOT4

very nice project. clean car. what type 4 fluid did you use? magkano yun fluid?

i just bought 3 liters of dot 4 seiken. will be trying it for the first time. though full flush for me is only 1-1.5 liters according to you tube pero with my skills i expect to pour at least 500ml to the floor hehe.

[yapoy86]

very nice project. clean car. what type 4 fluid did you use? magkano yun fluid?

i just bought 3 liters of dot 4 seiken. will be trying it for the first time. though full flush for me is only 1-1.5 liters according to you tube pero with my skills i expect to pour at least 500ml to the floor hehe.

Forgot how much.. but recently i bought zic dot 4 fluid.. around 500 pesos for 1 liter

Bendix dot 4 extreme.. used 500ml complete flush.. this bendix fluid is almost clear.. not like the usual dot 3 that is slightly yellow/brownish color.. 4x bleeding on the front and 8x bleed at the rear.. start with brake farthest from the reservoir

[travajante]

Installed hood insulator and hood dampers


Changed brake fluid to DOT4

[emoji106][emoji120]

Sent from my SM-G970F using Tapatalk

[jojopad]

Mazda Quezon Ave and North EDSA branches are shown as "Temporarily closed" from Mazda PH's google map branch locator.

[emoji853]

[Archerfish]

Mazda Quezon Ave and North EDSA branches are shown as "Temporarily closed" from Mazda PH's google map branch locator.

[emoji853]

I think Pampanga is open.