2014 Mazda 3

[JohnM]

This will be more accurate than the stock wheelspeed-based TPMS.

[travajante]

This will be more accurate than the stock wheelspeed-based TPMS.

I prefer the passive or none at all. The current genuine active ones are like $70ish a corner. They're of the same PN from those used in the pre-Kodo models.

Sent from my SM-G970F using Tapatalk

[KMG123]

Good day sirs, hihingi lang sana ako ng insights niyo regarding decarb cleaning ng casa? My 2015 Mazda 3 1.5 just hit 50k kms and never pa siya na decarb. Almost daily driven kasi siya from Antipolo to Makati so iniisip ko na baka worth it na yung inooffer ng casa hehe. Thank you!

[Egan101]

Good day sirs, hihingi lang sana ako ng insights niyo regarding decarb cleaning ng casa? My 2015 Mazda 3 1.5 just hit 50k kms and never pa siya na decarb. Almost daily driven kasi siya from Antipolo to Makati so iniisip ko na baka worth it na yung inooffer ng casa hehe. Thank you!

Is it indicated in the manual to do it? Or is it just a suggestion from the casa?


Sent from my iPhone using Tapatalk

[KMG123]

Is it indicated in the manual to do it? Or is it just a suggestion from the casa?


Sent from my iPhone using Tapatalk

Yup, na suggest lang siya ng casa when I did the last PMS, sir. Im trying to look it up in tsikot and it seems na mixed reviews ang decarb: may nagsasabi na its effective especially when bumper-to-bumper ang tinakbo, may nagsasabi naman na its almost useless. Hehe

[Egan101]

Yup, na suggest lang siya ng casa when I did the last PMS, sir. Im trying to look it up in tsikot and it seems na mixed reviews ang decarb: may nagsasabi na its effective especially when bumper-to-bumper ang tinakbo, may nagsasabi naman na its almost useless. Hehe

If it’s not on the manual, the casa is just making money out of you. Parang injector conditioner rin yan ng Ford.


Sent from my iPhone using Tapatalk

[JohnM]

I'm about to spring for a wheel upgrade soon. It's PCD 114 right?

I'm still on stock 16s so I'm planning to get 17s but will reconsider 18s if it makes sense. I'm concerned about the ride quality and the price of rubber if I go 2 steps bigger. I also have no intention of lowering the vehicle.

[travajante]

I'm about to spring for a wheel upgrade soon. It's PCD 114 right?

I'm still on stock 16s so I'm planning to get 17s but will reconsider 18s if it makes sense. I'm concerned about the ride quality and the price of rubber if I go 2 steps bigger. I also have no intention of lowering the vehicle.

PCD 5x114.3. Hub bore 67.1mm. If you go as wide as 8.5", stay et45 or higher. What's set are you setting sights on, brother John?

Sent from my SM-G970F using Tapatalk

[nomad]

I'm about to spring for a wheel upgrade soon. It's PCD 114 right?

I'm still on stock 16s so I'm planning to get 17s but will reconsider 18s if it makes sense. I'm concerned about the ride quality and the price of rubber if I go 2 steps bigger. I also have no intention of lowering the vehicle.

Yes, PCD114. On new wheels also check the hub center bore, stock is 67.1.

...or get the stock 18s for 2.0/speed or the stock 19s from MZ6 or CX9.

Sent from my Mi MIX 2S using Tapatalk

[JohnM]

PCD 5x114.3. Hub bore 67.1mm. If you go as wide as 8.5", stay et45 or higher. What's set are you setting sights on, brother John?

My wife will kill me if I get bnew Te37s. Can't step up to the Ring King's level

I'll settle for good quality second-hand imports from Japan. There are some lightweights available online every now and then. Besides my favorite detailer is setting up a paint shop so I know where to go for repairs

Yes, PCD114. On new wheels also check the hub center bore, stock is 67.1.

...or get the stock 18s for 2.0/speed or the stock 19s from MZ6 or CX9.

Maganda nga sana yung stock 18s ng 2.0 and they're readily available but I'm concerned about the weight. Stock 19s are s3xy on the BM!