SIRs good day!
Ive narrowed down my options to an 09 model (aqcuired dec 09) with 62k odo at 410k and 2010 model with 20k odo at 430k. Ok sana un 2010 kaya lng mejo madami ppgawa like a/c (not working), batt (palit) and missing accessories (foot break pad, etc). The 09 model is ok nman un acceleration and kng sakali cosmetics lang aayusin. My only concern is medyo malayo un odo nila.
Need your inputs sana which is the better choice. Btw, both are 2.0 m/t.
Also, they dnt have the casa records for both. In terms of mileage, ano na un mga dapat palitan/i-check based on PMS and if ever how much.
Really excited to get a carens...
Posted via Tsikot Mobile App
sa goodgear din ako nag pa replace ng timing belt last december for my carens. labor nila is around 3k yata. parang inabot lang yata ako ng almost 10k. palit lang ng oil seal, lahat ng belt and pulley. try mo call first goodgear kung may stock sila ng mga parts. they have replacement and oem parts. # is 8838382/ 8335493
Posted via Tsikot Mobile App
Sir Valskie01 and Sir Bingski,
Im planning to buy a pre owned carens 09 M/T at 62k PMS. Im not sure if nagawa ng previous owner un 60k PMS before selling the car to a dealer since wala ng casa records ang auto.
Do you suggest that i do these agad? Or pakiramdaman ko muna yung car after i buy it?
Hi Guys,
Got my 09 Carens yesterday and super sarap niya i-drive. Now i get to experience the speed na i have been reading dito sa blog. Thank you mga Papi for helping me decide and giving your inputs on what to look for before buying.
Posted via Tsikot Mobile App
Pagkaka alala ko sa Manual...nasa 120T km o 150T km pa palitan timing belt ....maaga ata at 60?
Posted via Tsikot Mobile App
ive been searching for front shock absorbers for the past 3 months pero wala talaga ako mahanap except sa casa, anyone na lately nagpunta sa mga korean auto shops na meron?
thanks!
thank you sir, bat kaya ganun, sa casa 2 days gagawin, papaiwan yung sasakyan, hindi daw kaya ng isang araw, pinalitan din po ba pati mga idler, pulley as listed dun sa pinost ni bingski?
and what day ka nagpunta sir at time, im planning to go there this friday, mga anong oras dapat nandun? pati po ba weekdays e marami din nagpapagawa?
thanks ulit
thanks!
went there last friday, replaced timing belt (gates), idler, tensioner, camshaft oil seal, crankshaft oilseal and v-ribbed belt, medyo napamahal sa tensioner kasi ni-source pa nila sa ibang store, total is 11k+ for parts and labor is 2.5k, kaya gawin ng isang oras kung kumpleto na yung parts, since naghintay pa ako makuha yung tensioner, inabot ako ng half day.
Finally able to log in again after a long long time....anyone up for 75K PMS? Any important parts needing to be replaced? thanks