Remote bypass oil filtration

[crazy_boy]

ambilis ng thread na to!! ask ko lang mga bossing anu ang baldwin filter for:

fieldmaster 2.5 4m40
fortuner 2006
honda jazz 2009

and saan makakabili sa manila?

sensya na ha...ang haba na kasi, naduduling nako kababackread...

actually nasa first few pages na yung sagot for your pajero sir.

[dvldoc]

Actually, you don't get what you pay for as the OEM stuff are pricey. In the case of the filter cartridge on the Toyota ZR engine, it's P300 a pop.

What was the OCI on that particular filter?

That filter was 5000k.

[bayen]

For those of you who still think OEM equals quality.







You get what you pay for folks.

oh my. that is simply terrible.
avoid using OEM oil filter like plague.

[blue_gambit]

ambilis ng thread na to!! ask ko lang mga bossing anu ang baldwin filter for:

fieldmaster 2.5 4m40
fortuner 2006
honda jazz 2009

and saan makakabili sa manila?

sensya na ha...ang haba na kasi, naduduling nako kababackread...

sa 4m40, the highly coveted Baldwin BD28 (still not available at volmax I presume? hehehe)or the still maybe in stock with Dvldoc Fleetguard LF3564 ...

Get them while supplies Last... hehehe

[Battlestar]

Guys, do you think they have oil filter for Ford Escape? I can't reach on their landline starting yesterday, laging busy. Thanks!

[dvldoc]

The BT223 works for the 4cly Escape.

I will be at the World trade center most of the day on the 19th for the Navara and Patrol display, Can bring whatever if anyone wants to PM me.

[jsaure72]

Hey, exchanging the elgrand to a patrol doc? Hehe

[dvldoc]

not a chance man, besides none can touch me on power or comfort. My van is a beast.

[boybig]

actually nasa first few pages na yung sagot for your pajero sir.

wha?? pabaligtad kasi ang basa ko from more current post to newer ones.. kung tinuloy ko pala yun eh aabutin ako ng hanging habagat bago ko marating ang dulo.. neway, tenks sa lahat ng nagreply!!

[kompressor]

The Baldwin site's cross reference appears to not work today. Even my previous searches which yielded results, blank ngayon.

I'm currently using a B2 in lieu of a Vic C206/C209. Would a B2 also fit in lieu of a Vic C207 or B113 lang talaga dapat? Wala namang babanggaan kasi pabaligtad ang installation.

[dvldoc]

The b113 is a nissan one with no bypass valve. I have those in fleetguard but only like 5 of them, i will basically have a bit of everything with me sunday at the world trade center. I will be there to at least 2pm u can get my cell number from my ads.

[vinj]

Had my change oil yesterday. Here's the oil filter element Toyota uses now for the 1ZR engine on the Gen 10.5 Altis.



This piece of origami cost P318!!!

The mechanic dropped the used filter into the can before i could get i. I'll take a shot of the used filter during my next service stop.

[bayen]

Had my change oil yesterday. Here's the oil filter element Toyota uses now for the 1ZR engine on the Gen 10.5 Altis.



This piece of origami cost P318!!!

The mechanic dropped the used filter into the can before i could get i. I'll take a shot of the used filter during my next service stop.

so boss parang refill lang sya?

[vinj]

^ Yep. And Toyota uses a special tool to remove the canister so when you have service done elsewhere, the mechanic should know how to properly unscrew it.

I hope better aftermarket elements will become available just as well. The o-ring (seen next to the filter) is also replaced every oil change.

[bayen]

^ Yep. And Toyota uses a special tool to remove the canister so when you have service done elsewhere, the mechanic should know how to properly unscrew it.

I hope better aftermarket elements will become available just as well. The o-ring (seen next to the filter) is also replaced every oil change.

that kinda sucks. limits you from using other after market filters like baldwin or FG.
You are stuck with Toyota OEM for now I guess till there are after market options.

[kompressor]

Baldwin B2 on a Nissan LD20II. P200 pesoses only courtesy of Volmax. Samantalang yung VIC C209 costs more than P350. Nagiging overpriced na rin ang VIC.

[Ry_Tower]

Hindi na lang "nagiging overpriced", overpriced na talaga. hehe

[bayen]

Hindi na lang "nagiging overpriced", overpriced na talaga. hehe

yikes. ang mahal nga nung vic. hamak na mas mura baldwin mas better pa.

[vinj]

that kinda sucks. limits you from using other after market filters like baldwin or FG.
You are stuck with Toyota OEM for now I guess till there are after market options.

Very limiting indeed. Hopefully the aftermarket catches up on this.

[bayen]

quick questions folks:

I was checking out Baldwin and FG variants having thread M20X1.5 and i noticed that some have 5 holes on top and some have 8. Most of them have 19 or 20 PSID and thread is m20x1.5. Question is, Does the number of holes on top cause any incompatibility issues with a car? More holes better flow or not?

Heres a few i noticed:

B1446 - 5 top holes, 3.8in, 20 psid
LF3528 - 8 top holes, 4.15 in, 19.5 psid
B109 - 5 top holes, 5.833, 20 psid
LF3433 - 5 holes, 5.35in, 19 psid
B7243 - 7 top holes, 3.5 in, 20 psid
B1402 - 8 holes, 4in, 14 psid
B1400 - 8 holes, 3in, 14 psid

some friends of mine have been requesting for longer filters for their rides but arent available so i figured why not use the ones compatible with other cars like the one for the isuzu, its longer, same thread pattern, same PSID, only difference is the number of top holes. Can you use those instead?