Detailing Thread [For Newbies][continued 3]

[jmpet626]

Thank you for the reply sir.

balak ko sana

WASH -> CLAY -> SEALANT tpos pag balik ko galing lakad

WASH or Punasan ulit then nanogloss -> nanosliq na pwede ba ganun sir
pwede ko ba e-labas agad yung car after lagyan ng sealant?

and ano po mabibili na ok ung tama price at mganda na sealant at clay sa (Ace,Blade,Handyman)? thanks in advance

24 hours ang curing time ng Sealant bago ka mag patong ng another layer or another product.



Pinaka sulit at best performance na sealant combo is Klasse AIO at Klasse HGSG kaso hindi siya available sa mga hardware stores. Yung Carlack68 same lang yan ng klasse rebranded lang siya.

Eto website nila sir

http://www.carlack68.com/

Medyo mahal initial investment pero matagal mo siya magagamit (3 to 4 years) at yung longevity ng Klasse/Carlack na 3 to 4 months sa Pinas na weather kung applied correctly.


Pwede niyo din PM si ExtremeDetail sa Pinoydetailing.com i think may binebenta pa siyang klasse twins.

[MrClay13]

24 hours ang curing time ng Sealant bago ka mag patong ng another layer or another product.



Pinaka sulit at best performance na sealant combo is Klasse AIO at Klasse HGSG kaso hindi siya available sa mga hardware stores. Yung Carlack68 same lang yan ng klasse rebranded lang siya.

Eto website nila sir

http://www.carlack68.com/

Medyo mahal initial investment pero matagal mo siya magagamit (3 to 4 years) at yung longevity ng Klasse/Carlack na 3 to 4 months sa Pinas na weather kung applied correctly.


Pwede niyo din PM si ExtremeDetail sa Pinoydetailing.com i think may binebenta pa siyang klasse twins.

Ok sir bukas na kasi ako mag detail sir ok lang ba gawin ko muna

WASH -> CLAY -> NANOGLOS -> NANOSLIQ
or
WASH -> NANOGLOS - > NANOSLIQ(hinde ko alam din kasi ano yung ok na clay na mabibili sa mga Hardware store)

wala pa kasi ako sealant at 476 hinde ko alam kung san makakabili here in quezon city hinde ko alam san banda yung bigberts.

thanks sir sa mga advice mo next week try ko na pilitin mag karon nung mga product na sinabi mo po cencia na po kung masyado marami tanong sobrang baguhan palang po talga ko pero gusto ko talga mag detail at gawing hobby toh gusto ko kasi alagaan yung first car ko thanks po talga.

[arjay18]

750 to 1,000watts dapat. Good brand yung Panther na transformer. Sa Mothers HQ sa santolan they sell PCXP.

Mahal sa mothers HQ sir e. 13k PC with 3 pads only.

[antz-z]

Balak ko din bumili sir, saan kayo kukuha?

Dito kasi ako sa US ngayon, so nagtitingin-tingin kung ano ok na bilhin.

[antz-z]

750 to 1,000watts dapat. Good brand yung Panther na transformer. Sa Mothers HQ sa santolan they sell PCXP.

Meron bang available na Panther transformer sa mga mall shops like True Value, Ace, Handyman, etc?

[cjv_justice]

Meron bang available na Panther transformer sa mga mall shops like True Value, Ace, Handyman, etc?

Sa ACE Hardware sigurado yan and madami variants depende sa wattage na kailangan... Sureball yang Panther brand.

[jmpet626]

Meron bang available na Panther transformer sa mga mall shops like True Value, Ace, Handyman, etc?

Meron sa Ace sir. Local brand po ang panther

[umi001]

Ok sir bukas na kasi ako mag detail sir ok lang ba gawin ko muna

WASH -> CLAY -> NANOGLOS -> NANOSLIQ
or
WASH -> NANOGLOS - > NANOSLIQ(hinde ko alam din kasi ano yung ok na clay na mabibili sa mga Hardware store)

wala pa kasi ako sealant at 476 hinde ko alam kung san makakabili here in quezon city hinde ko alam san banda yung bigberts.

thanks sir sa mga advice mo next week try ko na pilitin mag karon nung mga product na sinabi mo po cencia na po kung masyado marami tanong sobrang baguhan palang po talga ko pero gusto ko talga mag detail at gawing hobby toh gusto ko kasi alagaan yung first car ko thanks po talga.

You can buy a Mothers claying kit at most Blade stores, which is what a lot of people here use. You'll get the claybar, Mothers Showtime quick detailer, and a cloth (?). You can use a use the Showtime as a clay lubricant, though alternatively, you can instead use car shampoo mixed with water (parang sayang kung yung showtime yung gamitin mo...)

It's always good to have some protection on your car rather than none at all - so I agree that you should use what you have now, then add to your detailing regimen as you get more products. And the questions are certainly ok - we all started in the same boat, and learned through reading and asking.

Oh, a few additional thoughts - split the claybar in two or three pieces, and use just one of these - keep the others in an airtight container, like a ziplock bag or a lock and lock (?) container. Also, note that Nanoglos has a curing time - so after applying, wait at least 4 hours (preferably 8) before applying NanoSliq (which has properties similar to a booster wax).

[antz-z]

Meron sa Ace sir. Local brand po ang panther

Great! So if I were to buy a PC7424XP, what pad(s) should I get as well?

[jmpet626]

double post