Tsikot Sport Vehicle Project

[jet_sinker]

anong glass ang magfit diyan?

papasukatan sa aguila glass.

[jappy]

ganda ah.
=)

[jet_sinker]

ganda ah.
=)

Hi,

thank you for the compliment.. I like your hammer sir. Hope we can meet someday maybe we can help each other out.

[jappy]

sure sir.
kaso right now, wala ako unit namin eh.
sa client lahat.
hehehe.
pag meron na ako gamit na sariling unit uli sir.
btw i can refer you to a glass supplier also here.
maybe you can compare the cost.
you can send me a pm or sms me anytime.
=)

[8n_half]

JET-Sinker, do you have any idea how much the car weight without the engine? a friend of mine is very much interested....

[jet_sinker]

JET-Sinker, do you have any idea how much the car weight without the engine? a friend of mine is very much interested....

hi ,

the car now weighs 680kg and the engine is 120 kilos so its around 560 kilos without the engine.

[safeorigin]

wtf?! half ton?! gotta get me one of those

[Syuryuken]

awesome project

[redorange]

It looks a lot like a McLaren F1. Is that a tube chassis and did you guys do mold yourself for the fiberglass? What is the price for the car with the silver top engine or an SR20DET? If you could pm me the price range you expect to sell the car.

[jet_sinker]

wtf?! half ton?! gotta get me one of those

yes sir but thats without the engine and expect around less than 600 kilos with glass and and seats. The car at 560 kilos is without seats and glass thats the only thing we lack for now.

[jet_sinker]

awesome project

thank you sir!

[jet_sinker]

It looks a lot like a McLaren F1. Is that a tube chassis and did you guys do mold yourself for the fiberglass? What is the price for the car with the silver top engine or an SR20DET? If you could pm me the price range you expect to sell the car.

yes it resembles to some super cars. Yes tube chasis that was fabricated. And yes we where the ones who mold the fiber glass body. I have to talk to my partner bout the cost with silver top and sr20det price range. Right now we are revising the face of the car for perfection our target finish of the car is by march or april.

[jet_sinker]

Medyo natatagalan lang kasi inuuna muna namin tapusin yung project car ko here some pics of my car facing his car.

[jet_sinker]

[jet_sinker]

ayaw ata mg post ng pics anyway I made a account sa photobucket just see the cars we are into now. The cimbria is my car the folder named bodie is the concept car.

http://s256.photobucket.com/albums/hh173/jet_sinker/

[TambayBlues]

It looks a lot like a McLaren F1. Is that a tube chassis and did you guys do mold yourself for the fiberglass? What is the price for the car with the silver top engine or an SR20DET? If you could pm me the price range you expect to sell the car.

Guys I found this ebook, mukhang Ok to download nyo na lang...






http://**********.com/files/89354797...tion.part1.rar
http://**********.com/files/89355339...tion.part2.rar
http://**********.com/files/89355776...tion.part3.rar

[TambayBlues]

Ebook on building your own Lamborghini Countach using a Fiero Chassis with DIMENSIONS and ASSEMBLY PLANS included. Check it out;

Here's the emule link...

ed2k://|file|Plans%20To%20Build%20A%20Lamborghini%20Count ach%20On%20A%20Fiero%20Chassis%2033%20Pages.pdf|12 74025|2D787E3387FFC82D12E581846E5F10BC|/

[8n_half]

hi ,

the car now weighs 680kg and the engine is 120 kilos so its around 560 kilos without the engine.

560kg?,,not bad...hopefully, maka-uwi yong friend ko sa august this year w/ his car kit engine{hayabusa} daw.....thanks for the info...

[TambayBlues]

Will post pics soon may mga nirerevise kasi kami sa design lng. For the price it will depend po, kasi we can custom this car for you like engine this one has a b16 engine if medyo budgeted we can install a 20 valves toyota silver top engine para masmura. We will make it affordable as we could. engine is surplus hindi pa po nmin kaya gumawa ng engine if may budget maybe we can order sa casa ng engine for you.

Maybe you can buy engine plans at this site so you can build engines too. You can just scale up/modify the CAD drawing dimensions to increase the number of cylinders and engine displacement. Have them machined at the numerous machine shops in the Philippines or better yet you can also build your own gantry type CNC milling machine.

Check out these sites...


The plans set consists of 65 detailed sheets of quality laser printed CAD drawings and 5 sheets of Construction Notes.

http://www.jerry-howell.com/V-Four.html

http://www.craftsmanshipmuseum.com/HowellV4.htm


The Science and Technology of Materials in Automotive Engines
http://mihd.net/cq6901

CNC Robotics: Build Your Own Workshop Bot
Code:
http://**********.com/files/31608929/CNC_Robotics.pdf
http://mihd.net/yev0x1
PASSWORD: warez_akis

[jet_sinker]

560kg?,,not bad...hopefully, maka-uwi yong friend ko sa august this year w/ his car kit engine{hayabusa} daw.....thanks for the info...

Nice I saw some of those from my kit car mag is it the one that looks like a lotus, the lotus thats is like the ac cobra? the two seater covertible. They said it can go 11 sec a quarter mile? If the car kit comes here in August hope we can set a date to see each others cars thanx for sharing.