Toyota Innova Owners & Discussions [ARCHIVED]

[mspc56791979]

Kung naririnig mo ito just when the car starts to move, then it would be the ABS making the self check. Nakadiscuss ito sa operating manual ng sasakyan.

salamat sir timo07

[mspc56791979]

mga sir tanong ko lang kung meron na benta na aftermarket air intake for our innova.

Cold Air Intake gusto ko sana ikabit.

TIA

[innoBOB[09JmtG]]

magkano dapat budget for good stock-look 17" shoes on our innova? including additional labor/parts cost?

[ldfvalencia]

mga ser,

San po makabili nung sticker na Innova design. Nag mukhang sporty kasi tingnan plus kung may mags ka.

Magkano kaya yun?

Also, Magkano yung original door handle? (like the G and V series)

regarding sa sticker na Innova Design may nakita ako sa GoldCars Banaue last week end , i think it's P3200++

[ldfvalencia]

If I'm not mistaken, mas malapit siya if you enter banawe from E. Rodriguez Sr. Ave. They have a shop banner as with all other shops in Banawe....he..he.. As you know dikit dikit ang mga shops sa Banawe so you need to slow down and scan for their banner. Better yet, maglakad ka from E. Rodriguez, sa right side siya as you traverse banawe going to quezon ave. Look up their contact details sa Yellow Pages. I suggest you call them first to inquire about the specific part you intend to purchase, ask if they already have a stock and compare the price sa casa before you go there and make a purchase.

thanks !!!

[ldfvalencia]

Go for 45k disc, w free matting, tint, gas, window visor. Got it from Toyota Cubao. model E.

Last May 09 i got mine less 50K in Toyota Makati

[ldfvalencia]

~5,500.00 spoiler s CMISS then ok naman yung paint kuhang kuha....libre na kabit..wala na charge.na share ko lang.

Spoiler with LED on Goldcars cost P4.3K

[ldfvalencia]

Should be no drilling required for mudguards. Previous model does not require drilling for the mudguards as there are ready screw holes for this purpose.

Correct no drilling for mudguards!!!

[ldfvalencia]

Should be no drilling required for mudguards. Previous model does not require drilling for the mudguards as there are ready screw holes for this purpose.

Correct no drilling for mudguards!!!

[kupaloids]

Ano pala format ng bagong plate number ngayon?

Is it: XXX-999 o XXX-99

[TrickMaster]

Double Post..

[TrickMaster]

Help naman po fellow tsikoteers, ask ko lang po kung pwede ko i-charge sa waranty ng sasakyan ko yung nangyari dun sa Innova J 2008 ko. Eto po yung pic.



Hindi ko nga po alam kung paano nangyari, pero napansin ko na lang sya nung tatangalin ko ung seat covers ko nitong week para linisin. hindi pa po ako nagpapainstall ng power windows, central locks, alarm or even speakers sa 2nd row ng Innova ko.

Thanks Godspeed.

Kung hindi nyo po na-gets yung picture try ko po ulit picturan. thanks. T_T

[innoBOB[09JmtG]]

innova peeps, share ko lag first time ko sinugod sa baha (approx 1 ft siguro yun) innova ko kagabi, di na ako makamaneobra kasi traffic din, at nakikita ko mga sedan nakasugod naman kaya tinuloy ko na, buti naman, sa awa ng Diyos, di kami tumirik..

ngayon, ano dapat ko icheck up after ng ganung pangyayari?

brake pads? clean with running water?

any input peeps?

TIA

[roberto_minosa]

Help naman po fellow tsikoteers, ask ko lang po kung pwede ko i-charge sa waranty ng sasakyan ko yung nangyari dun sa Innova J 2008 ko. Eto po yung pic.



Hindi ko nga po alam kung paano nangyari, pero napansin ko na lang sya nung tatangalin ko ung seat covers ko nitong week para linisin. hindi pa po ako nagpapainstall ng power windows, central locks, alarm or even speakers sa 2nd row ng Innova ko.

Thanks Godspeed.

Kung hindi nyo po na-gets yung picture try ko po ulit picturan. thanks. T_T

Is that the B-pillar?

You can take it back to Toyota to claim warranty. It's a workmanship issue. But for convenience, you can also try to snap it back into place. The plastic interior panels are mostly snap-on.

[badgley907]

mga pre, ok lang ba kahit tanggalin na yung conduction sticker?

1 yr na yung ride namin..

tsaka ok po ba yung inverter na disaksak sa sindihan ng yosi?
and ano yung safe? (voltage) ok ba yung sa CD-R king?

TIA

[Mile2]

mga pre, ok lang ba kahit tanggalin na yung conduction sticker?

1 yr na yung ride namin..

There's no more use of the conduction sticker once you have the LTO stickers.

I had mine removed the day I received my LTO stickers. I peel off the whole conduction sticker easily and transfer it to a plastic sheet which I kept with all the cars documents. The longer you have it on your windshield and rear glass the more it gets tougher to remove.

[innoBOB[09JmtG]]

mga pre, ok lang ba kahit tanggalin na yung conduction sticker?

1 yr na yung ride namin..

tsaka ok po ba yung inverter na disaksak sa sindihan ng yosi?
and ano yung safe? (voltage) ok ba yung sa CD-R king?

TIA

pwede bro, use hot water to remove it safely

as far as cdr king products go, i don't trust them

[TrickMaster]

Is that the B-pillar?

You can take it back to Toyota to claim warranty. It's a workmanship issue. But for convenience, you can also try to snap it back into place. The plastic interior panels are mostly snap-on.

Yes Sir, thats the b-pillar. Okay lang ba yun kahit a year old na yung sasakyan? Tinutulak ko ulit pero after a while babalik.

[badgley907]

pwede bro, use hot water to remove it safely

as far as cdr king products go, i don't trust them

thanks sir, i appreciate your response.

[badgley907]

There's no more use of the conduction sticker once you have the LTO stickers.

I had mine removed the day I received my LTO stickers. I peel off the whole conduction sticker easily and transfer it to a plastic sheet which I kept with all the cars documents. The longer you have it on your windshield and rear glass the more it gets tougher to remove.

ok sir, thankyou..