New Mitsubishi Strada [ARCHIVED]

[boyscout]

paranaque. after filling up the form what do i do next? i'll just call the officers? attend an eb? how do i pay?

[ianmitsulancer]

paranaque. after filling up the form what do i do next? i'll just call the officers? attend an eb? how do i pay?

Hi sir, please feel free to meet up with the club to attend the EB and Pay the Membership fee.

Regular Friday Night Meet-up
When: Friday June 19, 2009
Time: 8 pm onwards
Where: Metrowalk (Ortigas) back gravel parking then one of the resto/bar for dinner/drinks.


The officer's contact numbers are located at our club website. Feel free to browse the Contact Us section...


i hope that helps po. thanks

[av8or5]

paranaque. after filling up the form what do i do next? i'll just call the officers? attend an eb? how do i pay?

Interested to join The Strada Club of the Philippines?

Here are the requirements for membership:
a. must be at least 18 years old with full civil capacity
b. must be a holder of a valid Driver's License
c. must own/frequently drives/loves a Mitsubishi Strada, regardless of variant and year model
d. must attend (with your Strada of course) at least one (1) EB or any club sanctioned activity
e. must pay the PhP600.00 membership fee
f. must be of good moral character
g. must fill out the application form.

Upon compliance with all of the above requisites, a new member will be given a club t-shirt and a sticker. Extra t-shirt is PhP250.00 and extra sticker is PhP300 (big).

http://www.stradaclubph.com/join-us.php

Hi sir, please feel free to meet up with the club to attend the EB and Pay the Membership fee.

Regular Friday Night Meet-up
When: Friday June 19, 2009
Time: 8 pm onwards
Where: Metrowalk (Ortigas) back gravel parking then one of the resto/bar for dinner/drinks.


The officer's contact numbers are located at our club website. Feel free to browse the Contact Us section...


i hope that helps po. thanks

[boyscout]

thank you will ask my brother in law kung available siya sa friday. and will confirm with the club president.

[av8or5]

tomorrow June 19, 2009 Friday night meet-up. 8pm at Metrowalk, Chicken Inasal Resto. See you all.

[detoxteam]

Good evening Strada Gurus:

I was able to purchase the map light for the higher end strada models. Pakakabit ko sana sa casa para sa aking GLX, but it appeared that the guys who checked it out weren't very familiar with the job. Can anyone point me to where a better alternative may be?

Salamat and more power to you all!

Edwin R

[tancho_kuhaku]

Good evening Strada Gurus:

I was able to purchase the map light for the higher end strada models. Pakakabit ko sana sa casa para sa aking GLX, but it appeared that the guys who checked it out weren't very familiar with the job. Can anyone point me to where a better alternative may be?

Salamat and more power to you all!

Edwin R

try to PM the patriarch nagpakabit din xa sa glx niya, for sure he knows where.

i envy guys dyan sa manila kasi sa cebu walang marunong or should i say i dont trust them enough hehe

[detoxteam]

Thank you!

[Boz]

Good evening Strada Gurus:

I was able to purchase the map light for the higher end strada models. Pakakabit ko sana sa casa para sa aking GLX, but it appeared that the guys who checked it out weren't very familiar with the job. Can anyone point me to where a better alternative may be?

Salamat and more power to you all!

Edwin R

TP is still asleep. Gabi gabing puyat... hehe
If I remember it right, sir TP had it done c/o Seatmate in Mandaluyong.

[av8or5]

TP is still asleep. Gabi gabing puyat... hehe
If I remember it right, sir TP had it done c/o Seatmate in Mandaluyong.

correct si doc boz.

[ThePatriarch]

hehehe, nagPM na siya and nag-reply na ako...

pero totoo yung puyat ako lately hahahaha

[tc327]

hehehe, nagPM na siya and nag-reply na ako...

pero totoo yung puyat ako lately hahahaha

well tlagang mapupuyat magbantay nang beybi first born eh congrats sir

[RTS]

Hi' I just acquired the Strada Gls a week ago, I installed the retractable (aluminum)cover in one of the shop in Banawe, in order the rail will fit in, they have to cut the upper edge of the (stock) bed liner both side, including the area of the rear tires cover. Though it is not "bistado " but if you peek down ,it is ugly aftermath. stock lashing anchor or rope clips has no use anymore, I have to to install that will fit the top liner. My question is will I find one in the hardware or any store in Banawe that cater this kind of stuff, or maybe I will resort to stainless hand rail. Thank you very much for any inputs you can share.

RTS

[ooba99]

Hi' I just acquired the Strada Gls a week ago, I installed the retractable (aluminum)cover in one of the shop in Banawe, in order the rail will fit in, they have to cut the upper edge of the (stock) bed liner both side, including the area of the rear tires cover. Though it is not "bistado " but if you peek down ,it is ugly aftermath. stock lashing anchor or rope clips has no use anymore, I have to to install that will fit the top liner. My question is will I find one in the hardware or any store in Banawe that cater this kind of stuff, or maybe I will resort to stainless hand rail. Thank you very much for any inputs you can share.

RTS

Welcome to tsikot.com and welcome to the mitsubishi strada thread, sir RTS. You mentioned you acquired a Strada GLS, is this previously owned? Is the engine displacement of your strada, 2.5L or 3.2L?

Also, may I suggest that you post pictures of the things that you are describing so the readers will have an idea of the problem and may be able to reply accordingly?

Lastly, may I invite you to join us in The Strada Club of the Philippines? You may want to visit our club's website: http://www.stradaclubph.com

[RTS]

*ooba99

Thanks for early response, actually it is 3.2, A/T ,a year old & Im the second owner. I'll take a picture & post it later.still dressing her up accordingly since the previous owner not his/ her cup of tea in dressing the lady strada.

Rgds.,
RTS

[ooba99]

*ooba99

Thanks for early response, actually it is 3.2, A/T ,a year old & Im the second owner. I'll take a picture & post it later.still dressing her up accordingly since the previous owner not his/ her cup of tea in dressing the lady strada.

Rgds.,
RTS

Nice powerful truck you got there, sir RTS. Congratulations and we're sure that you will enjoy dressing her up. Does she have a name?

I'm just wondering why the original owner sold his/her strada.

[av8or5]

Hi' I just acquired the Strada Gls a week ago, I installed the retractable (aluminum)cover in one of the shop in Banawe, in order the rail will fit in, they have to cut the upper edge of the (stock) bed liner both side, including the area of the rear tires cover. Though it is not "bistado " but if you peek down ,it is ugly aftermath. stock lashing anchor or rope clips has no use anymore, I have to to install that will fit the top liner. My question is will I find one in the hardware or any store in Banawe that cater this kind of stuff, or maybe I will resort to stainless hand rail. Thank you very much for any inputs you can share.

RTS

welcome to the thread. from my observation of the roller-up lid, I didn't notice they cut the upper edge of the bed liner. as far as I know, its still there. calling brian, please clarify. muhkang panget naman that they cut the upper part of the bed liner...if that is the case..kitang kita ang metal ng bed side top.

[vinkim]

mga sirs, this is my first time to post.
meron po bang thread dito ng strada 2000-05 model? im planning to acquire one, hope you could redirect me.

Thanks

[detoxteam]

hehehe, nagPM na siya and nag-reply na ako...

pero totoo yung puyat ako lately hahahaha

Got it installed yesterday! Thanks for all the help!

[RTS]

*av8or5
Actually it is not the top that was cut but the underneath about 2 inches ,it will not be noticeable unless you peek the underneath, true the metal body is exposed and future seepin of water or dirt likely to happen, so im planning to seek the help of upholstery guy to wrap or patch up a long (fore & up) sheet of durable synthetic sheet,about 6 inches width, another expenses to the mounting cost of dressing up . I'm planning to have her a leatherette seat cover but not a smooth transition due my wife dislike the idea dahil mainit daw like our pajero ,the leather when exposed under the sun fried eggs ang labas. Any comments about the idea of leatherette seat covers or I'll just go to the traditional cloth material. My other car is nagseselos because she is not pampered like the lady strada.
Rgds.,
RTS