Mitsubishi Pajero Fieldmaster (Gen 2.5) [ARCHIVED]

[pajerokid]

Hi Promdiboy,

I just used my trusty dremel to do the dirty work. DIY lang po. Kung di po kayo masyado sanay, I suggest having a banawe boy install it.

In any case, the hardest part of it all is cutting the holes in the bumper extension. You may use my 'bangga' pic as reference to where the hole should be cut. Di ko lang sure saan mo lalagay yung additional 2 sensors Here's what i can remember about my install.

1) I mounted the central unit beneath my cd changer. under the carpet. So if youre looking at the Paj from behind, it should be at the right side.

2) the wires from the sensors, i think i had to remove the right taillight and pass the wires through there. Pinagapang ko lang underneath the weather seal (rubber grommet).

3) connected the sensor wires to the central unit.

4) gapang the wires from the central unit to the indicator. The indicator was mounted in the blank space with a circular cap on the bottom plastic shield covering the underside of the steering column (labo no?)

Basta, look for a circular plastic 'cap' remove it and mount the indicator there. Im not sure what a 4 sensor indicator looks like though. Baka hindi kasya. If that's the case, you simply have to find another spot for this.

I recall, i had to file down my indicator to make it fit. But the location I selected was perfect (for me at least). It's clearly viewable at most any position.

I'll get some pics over the weekend to help you out.

RC tayo! hehehe

[promdiboy]

thanks sa info sir pk. nasa subic na ako ngayon no banawe boys here. try ko rin manghiram ng dremel

how about yung radio mute wire did you use this feature? :car:

o.t. i thought binenta mo na yung rc mo? nakita ko nakapost sa rctech dati pa.

[OTEP]

If you are using a unit with the LED warning system, you can mount the LED indicators in the vicinity of the rear cargo area lamp. That way, it can be visible whether you are looking directly out back or using the rearview mirror when backing up.

[promdiboy]

ang galing nakabit ko na back up sensors. sinunod ko instruction mo. di ko na inisipan ng diskarte alam ko na agad kung saan mo nilagay.
sir pk di ko naitago yung wire ng display. from 2nd row going to the cd shuttle. nakapatong lang sa likod ng 3rd row seats.
and kulang talaga 2 sensors. blind spot yung gitna.
imho cheap yung beep sound compared sa audiovox unit ng expy. parang ibon yung sound, sa expy buong buo yung beep. sana mamute yung sound ng radio natin. :car:

[pajerokid]

Hehe. Medyo corny nga tunog.

Anyways, if you want to hide the wires, madali lang naman, but you will have to redo the whole 'gapang' process to the dash.

From the control unit, lift the carpet and pass the wires through there. Pass near the rear driver's side wheelwell. tapos, unscrew the plastic step-guards (yung grey plastic na inaapakan) and pass the wire underneath. repeat the same for the driver's door.

Eto tricky part, kelangan alisin mo yung footrest. deskarte lang. basically you have your wire up to the dashboard already

OT: May Banawe Boys pala sa subic hehehehe
Buhay na buhay yung savage ko. Naka .28 engine na nga. hehehe
Puro kalyo na ako dahil pullstart

[promdiboy]

I did a very stupid thing. with my back up sensor. thats why dapat magatanong muna ako bago magsimula. this is what happens when i do it my way. :car:

[nugundam93]

at least sure ka na it's on the last end of the car ;)

[pajerokid]

I did a very stupid thing. with my back up sensor. thats why dapat magatanong muna ako bago magsimula. this is what happens when i do it my way. :car:

Very ingenious! And im not being sarcastic. Oks nga yan IMO.

[Field Master]

Promdiboy, I'm sure your just joking and you have Nugundam on the your hook. I'm hoping to get one of those sensors too.

[Field Master]

Promdiboy, PK might be victim number 2. But it made me think also if I could install the sensor on tire cover instead.