2011 Mitsubishi Montero Sport [continued]

[zix888]

need to tap sa pin52 of connector C219 sa ETACS. pin52 wire color is red-yellow, yun C219 color gray located sa left side ng ETACS module...pero need a simple 2N2222 transistor circuit to drive the 'Security' indicator lamp sa dash dahil yun alarm LED supply is 5V only...

Bro eto ba yung right at the back Of the fuses? Nandyan din yung control ng signal flasher etc? May 2 sockets on the side?

[tuazon7]

Bro eto ba yung right at the back Of the fuses? Nandyan din yung control ng signal flasher etc? May 2 sockets on the side?

yup. yun dalawang connectors sa gilid but yun C219 is color gray...

[tuazon7]

nice

so when the alarm is armed, this light remains on now instead of the blue blinking light?

sir 111prez, yes that is right. parang OEM alarm na ang dating nya

[111prez]

sir 111prez, yes that is right. parang OEM alarm na ang dating nya

nice

i wonder kung puede yung dalawang light?

the reason being that the blue blinking led light is more of a theft deterrent since alam ng magnanakaw na ito ang alarm thus, hindi na gagalawin ang kotse

pag instrument panel red light lang, baka akala lang may malfunction at subukan pa ring buksan ang kotse hence unnecessary damage may occur

[zix888]

yup. yun dalawang connectors sa gilid but yun C219 is color gray...

Okie, got it. Came across those sockets when i was fixing my hyper flashing sa turn signals coz i replaced all the turn bulbs to leds.

*prez

Tama sir , what iam going to do is activate that security lamp together with the oem alarm led

[zix888]

yup. yun dalawang connectors sa gilid but yun C219 is color gray...

Bro san mo nabili yung 2N2222 , 2 shops na suki ko napuntahan ko, wala sila eh. Tsaka how much para may idea ko kung mapunta ako raon. TIA

[zix888]

Tamang tama ang timing nitong neodymium (magnet)for my filter, 25K pms na ako

[tuazon7]

Bro san mo nabili yung 2N2222 , 2 shops na suki ko napuntahan ko, wala sila eh. Tsaka how much para may idea ko kung mapunta ako raon. TIA

Bro, sa Deeco meron 2N2222A...50 petot ata yun...

[111prez]

the 'Security' lamp is not that readable sa photo, cannot get the right shoot...need photography lessons

when lighted up, is it the word security?

[tuazon7]

when lighted up, is it the word security?

yup. the word 'Security' is the one flashing...next project is the seatbelt indicator...

[prince777]

Tamang tama ang timing nitong neodymium (magnet)for my filter, 25K pms na ako

Where to get those magnets? ;)

[zix888]

Where to get those magnets? ;)

Pc hard drives. In my case, i just got them from an officemate who has a busted hard drive, so its free. Just be careful in dismantling those magnets, easily gets broken into pieces, "sayang"

[prince777]

Pc hard drives. In my case, i just got them from an officemate who has a busted hard drive, so its free. Just be careful in dismantling those magnets, easily gets broken into pieces, "sayang"

I would guess that there are available magnets in Gilmore.. Might as well get pairs of those before my 10K kms PMS with change oil..

[tancho_kuhaku]

Where to get those magnets? ;)

sorry for the ignorance, but whats the use sa magnets for PMS?

Thanks!

[zix888]

sorry for the ignorance, but whats the use sa magnets for PMS?

Thanks!

We can use these strongest permanent magnets made to trap tiny metal particles inside the filter. How? Just put these magnets there at your filter(outside) and definitely any metal particles will not go out from your filter. We do not want any tiny metal particles going around there in our precious engines

[111prez]

We can use these strongest permanent magnets made to trap tiny metal particles inside the filter. How? Just put these magnets there at your filter(outside) and definitely any metal particles will not go out from your filter. We do not want any tiny metal particles going around there in our precious engines

how do you attach these magnets to the fuel filter?

[zix888]

how do you attach these magnets to the fuel filter?

Sir sa oil filter siya naka attached. Just place it on top, you dont need anything to make it stay there.impossible to move them just by vibration, but just to be safe i put a small duct tape

[prince777]

Sir sa oil filter siya naka attached. Just place it on top, you dont need anything to make it stay there.impossible to move them just by vibration, but just to be safe i put a small duct tape

Di ba sa bottom sir zix ;)?

Magnet should be on the place where the sediments/particles will settle when the engine is off. In this way, more particles are trapped.

[zix888]

Di ba sa bottom sir zix ;)?

Magnet should be on the place where the sediments/particles will settle when the engine is off. In this way, more particles are trapped.

Yes good point, adjust ko yung sakin. Thanks

[zix888]

Just finished a diy, this is sir tuazon7's idea. Thanks bro