2011 Mitsubishi Montero Sport [continued]

[Retz]

Kaya nga ang ginagawa ko is have it laminated, two small clear tape lang, nakaipit lang sa isang side, thats it.*




Tapos sa plate stickers ganun din. P35 bucks lang for lamination of those 3 , kaysa sa tints mo bro, hehe.*

okay bro ah, pwede palang ipitin.

[KC Montero]

saw a monty last month at citimotors makati that had its alarm checked

what the winterpine technician did was to reset it.

ako kasi yung kasunod in line for my avt monitor replacement

ok na pre, dinala ko na sa casa. pinalitan ung shock sensor.

[prince777]

Kaya nga ang ginagawa ko is have it laminated, two small clear tape lang, nakaipit lang sa isang side, thats it.*

Tapos sa plate stickers ganun din. P35 bucks lang for lamination of those 3 , kaysa sa tints mo bro, hehe.*

Ito tinatawag na resourceful!
Thanks for the tip sir zix..pa member na kayo sa MSCP;)..

[111prez]

ok na pre, dinala ko na sa casa. pinalitan ung shock sensor.

saan nakalagay ang shock sensor?

[prince777]

saan nakalagay ang shock sensor?

Ito rin yung katanungan ko mula pa noong nakuha ko yung unit. At bawat pa-service ko nakakalimutan kong itanong sa technicians. Siguro sa winterpine na lang kapag nagpa-update ako sa 1.9a..

[KC Montero]

saan nakalagay ang shock sensor?

aw sorry prez, a relative actually took my MS sa casa. He did not witness how they changed the shock sensor, but he just asked where it is located. According to the SA its located just beside the red button. Red button for setting the alarm to valet and armed mode.

[butchyboy]

thanks. sabi nga working naman talaga even with nothing inside. pero naglalagay pa ng baffle para mas efficient yun filtering. kaya lang medyo worried ako sa mga usual filtering methods like steel wool, steel shreds and foam. kaya went into perforated sheets na lang para fixed sya sa loob, maliit nga lang yun mga butas ~2mm.

Agree ako dyan sir, pag may kapirasong nahigop na galling sa filter material malamang mabubungi yng turbo , as long naman ata na may Isang tube nanageextend sa bottom Nung can or at right angle yng intake and output hihiwalay yng oil sa hangin, pero may nahihigop pa din na konting oil dahil umiitim din yung output tube, at least majority naiiwan sa can

[butchyboy]

As promised sir zix ;)

reservoir


Pump



Initial connection nung injection near the intake manifold



Changed it to a stainless tube



22K yng whole system, yng 3K sa pagfabricate nung stainless tube, synthetic tube and clamps

[zix888]

As promised sir zix ;)

reservoir


Pump



Initial connection nung injection near the intake manifold



Changed it to a stainless tube



22K yng whole system, yng 3K sa pagfabricate nung stainless tube, synthetic tube and clamps

Thanks a lot sir. I would recommend naman the sprintbooster, as in plug and play, ramdam mo talaga yung difference

[111prez]

aw sorry prez, a relative actually took my MS sa casa. He did not witness how they changed the shock sensor, but he just asked where it is located. According to the SA its located just beside the red button. Red button for setting the alarm to valet and armed mode.

mabusisi nga mamaya

thanks for the info

[tuazon7]

mabusisi nga mamaya

thanks for the info

bro, yun shock sensor nasa ilalim ng dash sa driver's side. sa ibabaw banda ng accelerator pedal, almost katabi ng alarm module...

[111prez]

bro, yun shock sensor nasa ilalim ng dash sa driver's side. sa ibabaw banda ng accelerator pedal, almost katabi ng alarm module...

thanks for the info

curiously, hindi ba ito lokasyon masyadong malayo for a shock sensor?

naalala ko sa dating sasakyan ko, yung after market shock sensors are located/placed near the drivers door

what is the ideal place for a shock sensor to be located for it to be effective?

[crazy_boy]

As promised sir zix ;)

reservoir


Pump



Initial connection nung injection near the intake manifold



Changed it to a stainless tube



22K yng whole system, yng 3K sa pagfabricate nung stainless tube, synthetic tube and clamps

stage 1 yan or stage 2 sir? and san ka nagpakabit?

[butchyboy]

stage 1 yan or stage 2 sir? and san ka nagpakabit?

Yng may controller sir, stage 2 ata yun, d ako sure. I can adjust at what boost psi mag kick in yng partial and full flow Nung pump. Berrima diesel ako nagpakabit

[111prez]

nag tumbling at bumaliktad na ako sa ilalim ng steering column and i still can't find the shock sensor

there is no shock sensor beside the red button

will check again at baka na miss ko lang ito

[zix888]

nag tumbling at bumaliktad na ako sa ilalim ng steering column and i still can't find the shock sensor

there is no shock sensor beside the red button

will check again at baka na miss ko lang ito

Parang nakita ko yan bandang right ng steering column , halos tabi nga ng alarm module. mas convenient if remove mo muna yung black(under) and gray(front) cover, mas madali makita

[crazy_boy]

Yng may controller sir, stage 2 ata yun, d ako sure. I can adjust at what boost psi mag kick in yng partial and full flow Nung pump. Berrima diesel ako nagpakabit

stage 2 na nga yan. 22k kasama na installation diba? as per dvldoc's suggestion, mas maganda if away from heat yung pump. yun daw nakakasira ng pump e. and nasa tabi na ng turbo mo yung pump.

[111prez]

Parang nakita ko yan bandang right ng steering column , halos tabi nga ng alarm module. mas convenient if remove mo muna yung black(under) and gray(front) cover, mas madali makita

ah okay

i saw the covers and akala ko nasa ibabaw ito ng cover for easy access

nasa ilalim pala

so i need to remove the covers first

[prince777]

ah okay

i saw the covers and akala ko nasa ibabaw ito ng cover for easy access

nasa ilalim pala

so i need to remove the covers first

Don't dorget to take a snap atty! At least ma ma meet ko na din sya in picture!

Malayo na uli ako kay monty ngayon eh;)..

[111prez]

Don't dorget to take a snap atty! At least ma ma meet ko na din sya in picture!

Malayo na uli ako kay monty ngayon eh;)..

sige will try to take a snap

unless maunahan ako ni zix, hehehehe