2014 Mazda 3

[psychadelicfurs]

Just want to share my 1st mod courtesy of sir travs. My next wishlist is the racing beat exhaust

[travajante]

Just want to share my 1st mod courtesy of sir travs. My next wishlist is the racing beat exhaust

Whoah!!!! Soul Red FL3 FTW!!!! AwesoM3!!!!
Grats & thanks, good sir!!!

[Twinnies]

For those who live by "LESS IS MORE" the plate relocator is a MUST.

[travajante]

For those who live by "LESS IS MORE" the plate relocator is a MUST.

Thanks, Twinnies sir. It's been a while. How are you?

[Twinnies]

Thanks, Twinnies sir. It's been a while. How are you?

All good, Sir Travs!

[travajante]

All good, Sir Travs!

Great to know!!! Please post recent pics of your better than new M3, good sir!

[batanghamog1971]

Great to know!!! Please post recent pics of your better than new M3, good sir!

Mga Bro.. normal ba na meron moisture sa top portion ng loob ng headlight ng m3? additionally, talaga bang binubutasan yung lagayan ng plaka sa likod ng sedan?

[travajante]

Mga Bro.. normal ba na meron moisture sa top portion ng loob ng headlight ng m3? additionally, talaga bang binubutasan yung lagayan ng plaka sa likod ng sedan?

Yup, condensation to some degree is normal. At least, those that disappear. A discussion is buried in this thread somewhere.
Plate mount holes are factory pre-drilled, sir.

[jbertz24]

Good day sirs, I would just like to ask if you know of any good alternative to RB axle back? Sadly the RB is way out of my budget. I have no problem with my hobo sounding completely stock as long as it has twin pipe finishers. Your suggestions would be most welcome. Thanks!

Sent from my SM-G930F using Tapatalk

[bugsmobile]

Good day sirs, I would just like to ask if you know of any good alternative to RB axle back? Sadly the RB is way out of my budget. I have no problem with my hobo sounding completely stock as long as it has twin pipe finishers. Your suggestions would be most welcome. Thanks!

Sent from my SM-G930F using Tapatalk

Same situation sir. I also have a 1.5 & I also want to have a dual pipe & don't need naman the vroom vroom sound.

I inquired with mufflerland & if I remember correctly, they quoted me around P5k. They'll cut & replace the existing pipe since they don't have the exact look of the original one. Then they'll cut an opening on the other side which I think may abang naman. Then install identical piped on both sides.

[jbertz24]

Same situation sir. I also have a 1.5 & I also want to have a dual pipe & don't need naman the vroom vroom sound.

I inquired with mufflerland & if I remember correctly, they quoted me around P5k. They'll cut & replace the existing pipe since they don't have the exact look of the original one. Then they'll cut an opening on the other side which I think may abang naman. Then install identical piped on both sides.

Hindi ba parang clip on lang yun? Baka kasi ma void warranty kapag nag putol? I hope our resident experts could chip in

Sent from my SM-G930F using Tapatalk

[jbertz24]

Atoy is asking 25K for a borla pro xs, BTW.

Sent from my SM-G930F using Tapatalk

[Yatta]

Good day sirs, I would just like to ask if you know of any good alternative to RB axle back? Sadly the RB is way out of my budget. I have no problem with my hobo sounding completely stock as long as it has twin pipe finishers. Your suggestions would be most welcome. Thanks!

Sent from my SM-G930F using Tapatalk

Your cheapest option would be a custom job. Yung quote ng Mufflerland of P5k is about right. But note thats likely black iron piping and not stainless yet. You can pick a matching stainless tips to make up.

[jbertz24]

Your cheapest option would be a custom job. Yung quote ng Mufflerland of P5k is about right. But note thats likely black iron piping and not stainless yet. You can pick a matching stainless tips to make up.

Do you know of any hobo stainless clip on option? The thought of cutting makes me cringe. [emoji1]

Sent from my SM-G930F using Tapatalk

[Yatta]

Do you know of any hobo stainless clip on option? The thought of cutting makes me cringe. [emoji1]

Sent from my SM-G930F using Tapatalk

Mufflerland and other exhaust shops have an assortment to choose from.

[travajante]

Do you know of any hobo stainless clip on option? The thought of cutting makes me cringe. [emoji1]

Sent from my SM-G930F using Tapatalk

If you're after twin tips, look for used M3 axlebacks. You can cut the elbow w/ tip from the spare stock 1.5 & weld it to the left side. Or a 2.0's would be bolt on. It'll look OE, stock & sleeper.

If you want gains, OVT tunes now cover the facelift w/ GVC at cost lesser than Atoy's quote for assembled Borla. That's the ultimate bang4buck mod.

[jbertz24]

If you're after twin tips, look for used M3 axlebacks. You can cut the elbow w/ tip from the spare stock 1.5 & weld it to the left side. Or a 2.0's would be bolt on. It'll look OE, stock & sleeper.

If you want gains, OVT tunes now cover the facelift w/ GVC at cost lesser than Atoy's quote for assembled Borla. That's the ultimate bang4buck mod.

Got your email, sir. Point well taken. Will have to go the spare stock 2.0 route though since I really would want to keep my car as quiet as possible (the exact reason why I opted for the 2017 model - NVH and stuff). Regarding the OVT, definitely going to try that in 2 months time. Sanayin ko lang sarili ko sa stock tuning para nakangiti ako after the OVT. [emoji6]

Sent from my SM-G930F using Tapatalk

[balongbalong]

Those looking for a 2.0 litre muffler pm me with your offer. Its just in my storage room collecting dust


Sent from my iPhone using Tapatalk

[jbertz24]

Those looking for a 2.0 litre muffler pm me with your offer. Its just in my storage room collecting dust


Sent from my iPhone using Tapatalk

I'm calling dibs! 😅

Sent from my SM-G930F using Tapatalk

[jbertz24]

pm sent sir.

Sent from my SM-G930F using Tapatalk