2008 Hyundai Starex (Gen. 4)

[yebo]

So bro.,- ang GS mo walang rear wing with third brake light?

At, iyan ang third brake light mo? (IMO,- that is a neater solution).....
(Magkano ang score mo?)

19.9K:cheer:

Yes sir yan mismo ang 3rd brake light ko. No wings, useless naman yun spoiler na yun pampadumi lang ng rear window glass. Mura lang kuha ko, very much less than the cost of a 1/2 tank of diesel (tank ng gs ha). Di ko sabihin ang price baka kasi nagiba na, inflation hehehe. But i got it just a few months ago.

[mda]

Hey all, anybody have experience stenciling the GS engine? VGT model yung sa amin.

Checked out the manual, parang ang hirap abutin yung engine stencil location without removing anything but the engine cover.

The CASA is expectedly charging a whopping 1.5k to stencil the engine.

Anyone done this before? hehe

[CVT]

Yes sir yan mismo ang 3rd brake light ko. No wings, useless naman yun spoiler na yun pampadumi lang ng rear window glass. Mura lang kuha ko, very much less than the cost of a 1/2 tank of diesel (tank ng gs ha). Di ko sabihin ang price baka kasi nagiba na, inflation hehehe. But i got it just a few months ago.

Thanks bro.,- nakuha ko lang na freebie ang aking rear spoiler/wing dahil sa maling pangako ng SA....

Pero, sangkaterbang weather sealant ang inilagay nila dahil tumulo ito sa unang installation - second day niya kasi napalaban sa lakas ng ulan,- dumating si Ondoy.... :hysterical:

20,000:tumbleweed::lurk::meeting::massbounce::lala la:

[IMm29]

Guys,
After my 5000 kilometre check of my 2010 Grand starex hindi ko na pinaservice sa CASA yung starex Namin. Will they still honor the 5 year warranty of our van?

I don't think they will, noting how narrow-minded they've been as per the way the Service Advisors scare you when you ask about just following the kilometer reading instead of the number of months for PMS.

[IMm29]

So bro.,- ang GS mo walang rear wing with third brake light?

At, iyan ang third brake light mo? (IMO,- that is a neater solution).....
(Magkano ang score mo?)

19.9K:cheer:

Yeah, that's not a common accessory locally. Most aftermarket shops will push for the spoiler with brake light, also to mimic the higher end models which have this included.

[thebest]

Hindi na sir.

Dapat pala sa caso ko sinervice. Problema mas mahal pa sila magcharge sa Japanese cars. Yung parts doble presyo niya compared to other independent suppliers.

Thanks for the info guys.

[mk]

Yung stencil 300 pesos lang binayad ko sa hyundai abad santos ginawa hehe. Cyempre pinapunta ako sa shady area ng manager nila and sya na lang daw mag stencil hehe para yung 300 sa kanya na meron lang cya dinala na tape paper and pencil yata. Mabilis lang mag stencil basta ndi mainit yung makina. Wala na akong maalala na may tinangal cya sa engine cover

[mda]

Yung stencil 300 pesos lang binayad ko sa hyundai abad santos ginawa hehe. Cyempre pinapunta ako sa shady area ng manager nila and sya na lang daw mag stencil hehe para yung 300 sa kanya na meron lang cya dinala na tape paper and pencil yata. Mabilis lang mag stencil basta ndi mainit yung makina. Wala na akong maalala na may tinangal cya sa engine cover

VGT yung sa inyo sir? Baka pwedeng kami nalang gumawa kung ganun.

[bigcojones]

cvt - thanks! wala nga makita locally. hehe!


yebo - baka meron siyang extra na for sale sir.


btw, meron ba sa inyo nakaexperience sa right sliding door nyo na meron parang kumakalog? parang meron nakalagay na bagay sa pocket ng sliding door pero wala. very minimal naman yung tumutunog.

[Automahn]

Hey all, anybody have experience stenciling the GS engine? VGT model yung sa amin.

Checked out the manual, parang ang hirap abutin yung engine stencil location without removing anything but the engine cover.

The CASA is expectedly charging a whopping 1.5k to stencil the engine.

Anyone done this before? hehe

Just had our GS registered last month. Parusa magstencil ng engine ng Korean vehicles. Inaayawan ng mga taga-LTO yan. Ang nakakainis pa ayaw na ng LTO ang stencil via tape, gusto nila dun sa form nila mismo itetrace yung engine & chassis numbers.

Mahal sa casa. I had it done sa suking talyer ko for P600. The process took almost 2 hours, ang daming tatanggalin, di lang yung engine cover.

[IMm29]

VGT yung sa inyo sir? Baka pwedeng kami nalang gumawa kung ganun.

Mine's due 1st quarter next year. VGT. Offer still open then?


Posted using TocinoTalk

[Automahn]

Yung stencil 300 pesos lang binayad ko sa hyundai abad santos ginawa hehe. Cyempre pinapunta ako sa shady area ng manager nila and sya na lang daw mag stencil hehe para yung 300 sa kanya na meron lang cya dinala na tape paper and pencil yata. Mabilis lang mag stencil basta ndi mainit yung makina. Wala na akong maalala na may tinangal cya sa engine cover

Pano kaya niya naabot yung engine number? Pinanood ko yung pagstencil nung GS namin from start to finish, mukhang imposibleng maabot yung engine number without removing some of the parts like the alternator.

[mda]

Mine's due 1st quarter next year. VGT. Offer still open then?


Posted using TocinoTalk

Sorry, mukhang mali nasulat ko hehe.

I meant that if the manager could do that himself, baka pwedeng mano mano nalang namin gawin.

Hassle kasi 1500 charge samin.

[mda]

Pano kaya niya naabot yung engine number? Pinanood ko yung pagstencil nung GS namin from start to finish, mukhang imposibleng maabot yung engine number without removing some of the parts like the alternator.

Ito nga yung sabi samin eh, kaya ko tinanong. Hassle naman yung pag stencil ng engine kung tatanggalin lagi yung alternator. Every year pa naman ang registration -_-

[IMm29]

Sorry, mukhang mali nasulat ko hehe.

I meant that if the manager could do that himself, baka pwedeng mano mano nalang namin gawin.

Hassle kasi 1500 charge samin.

Hahaha! Sabi na nga ba may na-lost in translation. Was wondering why you'd offer. Anyhow, ok lang din naman that you did. ;)

Thanks for the clarification.

[mda]

Hahaha! Sabi na nga ba may na-lost in translation. Was wondering why you'd offer. Anyhow, ok lang din naman that you did. ;)

Thanks for the clarification.

I'll post some tips when if (or sana when) we get around finding an easy way of doing this. Sana madali lang nga.

1500 / year on registration stenciling alone is an unnecessary additional cost of ownership :/

[IMm29]

I'll post some tips when if (or sana when) we get around finding an easy way of doing this. Sana madali lang nga.

1500 / year on registration stenciling alone is an unnecessary additional cost of ownership :/

I agree. Been saved from that chore the first 3 years. Next year it gets painful.

[Automahn]

Ito nga yung sabi samin eh, kaya ko tinanong. Hassle naman yung pag stencil ng engine kung tatanggalin lagi yung alternator. Every year pa naman ang registration -_-

I'll post some tips when if (or sana when) we get around finding an easy way of doing this. Sana madali lang nga.

1500 / year on registration stenciling alone is an unnecessary additional cost of ownership :/

Nagpagawa na ako ng 4 copies ng stencil nung engine. Hihirit pa sana ako ng 3 pa kaya lang naubusan na kami ng LTO forms dahil nagkabutas-butas na yung mga papel sa first few attempts nung mekaniko at kita ko talagang hirap na hirap siya.

Di yata required ang pagstencil ng engine sa Korea pag nagrerenew ng registration kaya ganyan ang location ng mga engine number nila. Pati yung SF mahirap din i-stencil kaya yung casa dito sa min bago i-release ang mga brand new units, ginagawan na nila ng maraming stencil.

Kaya mahal ang singil nila dahil yun nga, ang laking trabaho para lang magstencil. Matatali yung isang mekaniko nila ng halos 2 oras sa isang minor job na not so minor, hehe.

[CVT]

Nagpagawa na ako ng 4 copies ng stencil nung engine. Hihirit pa sana ako ng 3 pa kaya lang naubusan na kami ng LTO forms dahil nagkabutas-butas na yung mga papel sa first few attempts nung mekaniko at kita ko talagang hirap na hirap siya.

Di yata required ang pagstencil ng engine sa Korea pag nagrerenew ng registration kaya ganyan ang location ng mga engine number nila. Pati yung SF mahirap din i-stencil kaya yung casa dito sa min bago i-release ang mga brand new units, ginagawan na nila ng maraming stencil.

Kaya mahal ang singil nila dahil yun nga, ang laking trabaho para lang magstencil. Matatali yung isang mekaniko nila ng halos 2 oras sa isang minor job na not so minor, hehe.

Ayos iyan bro.,- forward looking...

20.0K:lollipop:

[IMm29]

To Local/HARI GS Owners,

How many power outlets do your units have? I have one lighter, and one supposedly below the front cupholders but this one I don't think works. CMIIW though.