audio set-up for beginners [continued]

**jhnkvn** · September 16th, 2014 06:33 PM

Originally Posted by sientobente

After getting a new car, how long do you have to wait before upgrading your audio system? Medyo critical kasi if electrical warranty ang ma-void.

Most people wait until their electrical warranty is up. Although, technically, the CASA can't void your electrical warranty unless you spliced a wire here and there. As for me, paglabas palang ng casa direcho na

**enargie** · September 17th, 2014 02:29 PM

ok lang ba na ang subwoofer (10") and 2-way seps to be powered by a single 4 channel amp or mas ideal na may separate amp ang subwoofer.

**kuniknok** · September 17th, 2014 03:01 PM

Mga master any review about Precision Response Amplifier? Ill wait for your reply.. TIA

**markygy** · September 17th, 2014 03:33 PM

Originally Posted by enargie

ok lang ba na ang subwoofer (10") and 2-way seps to be powered by a single 4 channel amp or mas ideal na may separate amp ang subwoofer.

No need for a separate dedicated amplifier for your subs if you have a 4 channel amp powering a pair of components and s sub woofer. The only time you add a separate amp for the subs is when it is obvious that the subs needs more power.

**zen..** · September 17th, 2014 04:11 PM

Originally Posted by markygy

How many channels does your amplifier have and how many pair/s of components/seps is the amplifier powering?

4 channels po. Ch 1 and 2 naka bridge for the sub . 3 and 4 sa front speaker. Na pag alaman ko po na distorted lang is yung ch 3

**jhnkvn** · September 17th, 2014 04:50 PM

Originally Posted by zen..

4 channels po. Ch 1 and 2 naka bridge for the sub . 3 and 4 sa front speaker. Na pag alaman ko po na distorted lang is yung ch 3

And dahil distorted, ayan ang culprit ng iyong problema..

Originally Posted by zen..

eto po problem. sobrang basag yung tunog ng mid range pag dumaan sa amp pero pag sa head unit naka connect okay naman ang tunog. wala naman problema sa sub. Minsan okay naman tunog kahit sa amp naka kabit.

**ezem** · September 18th, 2014 01:27 AM

mga paps...patulong...i have HSK 163 (3-way), amp would be LRx 5.1k and I'm planning to have it semi-active. But not the usual 3-way semi-active wherein TW+ Midrange for amp A-channel in A-pillar, and Midbass for amp B-channel. Question is:

would it be advisable na ang TW for A-channel, and midrange + midbass for B-channel? Midbass would be in stock location, and midrange would be in kick panel, while the tweeters would be in a-pillar?..

doing so will make the soundstage larger and for additional depth? and to avoid that "in your face" sound?...

what would i be facing in this kind of setup?

TIA

**sientobente** · September 18th, 2014 04:24 AM

Originally Posted by kuniknok

Mga master any review about Precision Response Amplifier? Ill wait for your reply.. TIA

Hi,
Is that an amp you got from a local dealer?

**artsky** · September 18th, 2014 07:22 AM

Guys, anong headunit ang may magandang display. Hanap ko sana yung tipong madaming VU meter bars then may peak hold. Yung mga touchscreen ba na pioneer may ganyan, or this feature exclusive lang sa mga old vacuum-florescent displays?

**enargie** · September 18th, 2014 08:46 AM

Originally Posted by markygy

No need for a separate dedicated amplifier for your subs if you have a 4 channel amp powering a pair of components and s sub woofer. The only time you add a separate amp for the subs is when it is obvious that the subs needs more power.

Sir, need advise for the specs of 4 channel amp I need to choose to power a 10" sub and a pair of 2-way seps.

Thanks