Suzuki JIMNY [merged threads]

**crazy_boy** · August 9th, 2013 10:35 AM

Originally Posted by jdjoeydean

Last time i went there sa Wheels E.Rod.Mayroon 9000 yata.

Wow ang mahal pala ng rear spoiler na oem. Maganda nga yung oem rear spoiler.

Sent from my GT-I9300 using Tapatalk 2

**halimaw** · August 13th, 2013 10:46 PM

Rehistro 4k...

Sent from my iPhone using Tapatalk

**crazy_boy** · August 13th, 2013 11:02 PM

Halimaw, anong FC nakukuha mo sa jimny mo?

Sent from my GT-I9300 using Tapatalk 2

**KCboy** · August 13th, 2013 11:28 PM

Ako kanina sa skyway parang feeling ko 8to9kms per liter. Mababa gearing, nasa 4th gear na wala pa ako 40kph. Pag gusto mo magtravel above 80kph, almost 2,500rpm na rev range ko.

**crazy_boy** · August 13th, 2013 11:45 PM

Kcboy, mas matipid yung jimny mo kasi vvt na e hehe

Btw, i sent you PM

Sent from my GT-I9300 using Tapatalk 2

**OTEP** · August 14th, 2013 12:07 AM

Just had the home service Suzuki Mechanics do work on the Jimny last Sunday:
1. Change engine oil (Valvoline Durablend semi-synth)
2. Change oil filter (ViC C-415)
3. Replace one of the fanbelts (Gates 4pk955)
4. Replace ATF (Caltex Texmatic)
5. Replace spark plugs (NGK bkr6E)
6. Disassemble and clean intake manifold and idle up
7. Replace valve cover gasket and spark plug o-rings (OEM)
8. Clean and adjust rear brakes
9. Clean and replace front brake pads (Bendix DB403)

They did point out that the front axle end seals (leaking grease) and engine supports (vibration when shifted into reverse with brakes applied) need replacing soon. Will schedule those works. Above listed works were started 9am and finished before 12nn.

**KCboy** · August 14th, 2013 09:29 AM

Originally Posted by OTEP

Just had the home service Suzuki Mechanics do work on the Jimny last Sunday:
1. Change engine oil (Valvoline Durablend semi-synth)
2. Change oil filter (ViC C-415)
3. Replace one of the fanbelts (Gates 4pk955)
4. Replace ATF (Caltex Texmatic)
5. Replace spark plugs (NGK bkr6E)
6. Disassemble and clean intake manifold and idle up
7. Replace valve cover gasket and spark plug o-rings (OEM)
8. Clean and adjust rear brakes
9. Clean and replace front brake pads (Bendix DB403)

They did point out that the front axle end seals (leaking grease) and engine supports (vibration when shifted into reverse with brakes applied) need replacing soon. Will schedule those works. Above listed works were started 9am and finished before 12nn.

Otep,

Ok ito, next time sa iyo nalang ako ask ng advice pag pms time na ng jimny ko, i was licky to get my jimny na kaka pms lang.

**TomE** · August 14th, 2013 09:47 AM

Originally Posted by OTEP

Just had the home service Suzuki Mechanics do work on the Jimny last Sunday:
1. Change engine oil (Valvoline Durablend semi-synth)
2. Change oil filter (ViC C-415)
3. Replace one of the fanbelts (Gates 4pk955)
4. Replace ATF (Caltex Texmatic)
5. Replace spark plugs (NGK bkr6E)
6. Disassemble and clean intake manifold and idle up
7. Replace valve cover gasket and spark plug o-rings (OEM)
8. Clean and adjust rear brakes
9. Clean and replace front brake pads (Bendix DB403)

They did point out that the front axle end seals (leaking grease) and engine supports (vibration when shifted into reverse with brakes applied) need replacing soon. Will schedule those works. Above listed works were started 9am and finished before 12nn.

Doc, could I please have the contact numbers of the mechanic/s?

**crazy_boy** · August 14th, 2013 10:10 AM

Originally Posted by KCboy

Ako kanina sa skyway parang feeling ko 8to9kms per liter. Mababa gearing, nasa 4th gear na wala pa ako 40kph. Pag gusto mo magtravel above 80kph, almost 2,500rpm na rev range ko.

Low gearing nga hehe yung 5th gear at 2000rpm nasa 60kph palang hehe

btw, Doc Otep, nagawa mo na ba yung squeaking belt ng jimny? nag-squeak din sa akin pag bagong start.

Sent from my GT-I9300 using Tapatalk 2

**OTEP** · August 14th, 2013 09:59 PM

Originally Posted by crazy_boy

Low gearing nga hehe yung 5th gear at 2000rpm nasa 60kph palang hehe

btw, Doc Otep, nagawa mo na ba yung squeaking belt ng jimny? nag-squeak din sa akin pag bagong start.

Sent from my GT-I9300 using Tapatalk 2

Nagawa ni Mang Mario pero nung nagpalit ng belt may konting squeak ulit. Baka bearing ng pulley?