Anything And Everything Pc

**bardigones** · September 25th, 2003 05:09 PM

hey guys, you might be interested on my 5.1 speakers. im selling them eh.

http://www.tsikot.com/forums/showthr...&threadid=7969

**mdpo** · September 26th, 2003 08:55 AM

Guys,

Have hard time choosing bet. Epox 8rda+ vs Epox 8rga+ ang tanong ko maganda ba ang video card ng 8rga+? or better buy 8rda and separate video card? What video card can u recommend? 4k lang ang budget ko kasi. Lastly what's the diff bet 8rda2+ and 8rda3+?

thanks

**newbie13** · September 26th, 2003 12:32 PM

IMHO i chose a separate video card.Anything radeon by ati will do.

**pajerokid** · September 26th, 2003 05:19 PM

frankD, pwede naman pala i-run yung winxp setup from within Xp. Naka SP1 na ako :D gago kasi yung isang estudyante ko eh, sabi kailangan fresh install.

mdpo, 8RGA+ may built in GeForce4MX440. Pero if youre after performance, im sure everyone would agree that mas maganda standalone AGP card.

Im not aware of an 8RDA2+. Alam ko lang 8RDA+ and 8RDA3+.

If youre getting an 8RDA+ make sure youre getting REVISON2.0!!! baka ito yung sinasabi mo na 8RDA2+? :D

Better yet, get an 8RDA3+ mas maganda coz it supports DUAL LAN Addresses, and even more importantly, SATA. SATA HDDs almost equal SCSIs in terms of performance. And from what ive read, it will even improve as time progresses. (Increase in memory bandwidth, as tehcnology comes along, with HDD capacity into the TeraBytes (1000 Gigs)).

Epox boards are good! Maganda yung health monitoring niya and you can update the bios in windows!

**mdpo** · September 26th, 2003 07:07 PM

Ganun ba.. most probably I will go for 8rga+ ok na naman siguro yung graphics nito since di naman instense gaming ang lalaruin. 1st yr h.s. lang gagamit eh.. also what cpu fan can u recommend coz I plan on upgrading the cpu fan also.

maganda rin ba sounds ng 8rga+? coz i heard maganda yung sa 8rda+

**pajerokid** · September 26th, 2003 07:18 PM

cpu fan lang? kung hindi ka rin naman hardcore overclocker, stock would do. The best is fan is an 80mm Alpha Tri blade, runsa at 5000rpm. Kaya lang its notorious for noise. I use a Globalwin CAK4-88 copper HSF combo. oks siya. keeps my cpu temps down to the mid 40's.

I dont use onboard audio eh :D Sayang naman yung Live! DE ko. But i heard maganda nga raw yung sa 8RDA+, soundstorm ata yun e.

**mdpo** · September 26th, 2003 08:36 PM

Ganun ba... so i guess normal na pala ang mid 40's wala na pala ibababa ito... I plan to upgrade the fan so that maski matagal na nagamit alikabok.. or ginagamit sa mainit na lugar kakayanin.

**pajerokid** · September 26th, 2003 08:56 PM

Mid 40's is Ok. :D

If you want to lower your temps a couple of degrees, you can try using Arctic Silver 3 thermal compound. Your temp will drop around 2-4 degrees.

Yung gamit ko ngayon na HeatSink/Fan mahusay. Kaso nga medyo pricey. Php1,200. That's why my AthlonXP 2500+ is able to run at 3200+ levels in complete stability. :D

search mo sa net yung CAK4-88. :D Kaya lang mahirap i-DIY install yan, i cracked my processor's core while installing it.

**pajerokid** · September 26th, 2003 09:03 PM

ATTN WINXP Professional USERS!!!

A little Help lang po :D

Paki right click po ang my computer and then post what it says under the category 'system'.

I need the ff info....

1) Have you installed SP1 or SP1a ? (Yes/No)
2) What is the Build Number? (eg. Build 2006)
3) What is the Version (eg. Version 2002)

Thank you po in advance mga PC peeps. I did a lot of fooling around with my pc and now i have no idea what version it is.

**need4speed** · September 27th, 2003 12:03 AM

Original Windows XP and Serial

all it says on mine
is:

Microsoft Windows XP
Professional
Version 2002
Service Pack 1

nothing about the build number

**pajerokid** · September 27th, 2003 12:37 AM

Ok thanks dude!!!

I finally got to install SP1 in mine. :D

**need4speed** · September 27th, 2003 12:57 AM

cool dude... don't forget to patch your pc with the vulnerability patches...

**Karding** · September 27th, 2003 01:20 AM

Windows XP
Professional
Version 2002
Service Pack 1

Intel PII
448MHz
256MB

:hihihi:

anyone played/seen the G5? A whopping 40lbs, Ti Chassis

looks easier to work with. The internal is laid out very well. 8 slots with a max mem of 8GB

This has gotta be the biggest heat-sink I have ever seen

and VGA is now extinct with G5s.

**cardo** · September 27th, 2003 01:23 AM

hey guys, what do you think of AMD's latest Athlon 64 fx processor?

**mbt** · September 27th, 2003 01:24 AM

pk,

ininstall mo yung SP1 quick installer?

**sHoCkAbSoRbEr** · September 27th, 2003 08:32 AM

Microsoft Windows
Version 5.1 (Build 2600.xpsp2.030422-1633: Service Pack 1)

In order to see which build your version of Windows is, type winver from the Run command.

**kimpOy** · September 27th, 2003 11:33 AM

need help mga PC gurus

yung nabili kong PC na PII, ayaw mag browse, laging lumalabas error cannot display page, but kapag dito naman sa PIII ko sa office ay ok naman,

napansin ko lang na sobrang daming games nung nakuha ko pero ngayon lahat uninstall ko na,

naisip ko lang baka maraming shared files ang nabura

pero nasa connection ang bagal sobra yung received and sent bytes, pero dito sa office at the same time mabilis naman

anong gagawin ko?

**need4speed** · September 27th, 2003 11:46 AM

could you elaborate a little further kimpoy....
describe the system configuration...

the more descriptive the description of the problem... the better it is for diagnosing the solution...

based on what your saying... if your getting a cannot display page error... there are a few possible reasons...

1) is your LAN card properly configured with all the proper protocols and has an appropriate driver installed? (if your connected to a network)

2) is your modem properly installed and is detected by the OS?
(if your using dial up)

3) what OS are you using for the P2? I suggest using win95 or 98. anything higher than that can greatly decrease performance.

4) how much ram do you have?

5) how much hard disk space and swap space?

6) are you able to ping a website?

7) is your phone cable / network cable properly inserted? did you test if they function on another computer?

8) do you have the proper proxy settings ? (if required)... or disabled... ( if not required)

hmm... that's what i can think of so far...
a P2 is really slow... can't really expect it to do much...

if you stuck Linux on it... maybe you'd get better performance

**pajerokid** · September 27th, 2003 03:21 PM

mbt, im not really sure what i installed. The file was 133MB large. I was having trouble installing SP1a, I was getting a message saying that i have a friggin checked/debug system (used by hardware developers to test drivers for their hardware). A student of mine gave me a WinXP SP1 cd (not 1a). I tried it and it worked. The main reason i wanted this was to have USB2.0 support.

No horror stories from this camp. Yung officemates ko kasi naghahang daw pc nila after installing SP1. Oh, and dont worry about the activation thing... i have cracks aplenty! YEAH GATES!!! YOU HEARD ME!!!! hehehehehe :evillaugh

you want? Burn kita ng CD.

**pajerokid** · September 27th, 2003 03:29 PM

Karding:: thanks pare! solb na prob ko hehe :D

cardo:: I found The initial realeases of AMD new 64bit platforms rather disappointing. The Opteron 144 is a bit slower than my current setup. But of course, things will take off from there. Oh, and did i mention theyre pretty expensive? Wala pang out na Athlon64.

The AXP line is nearing its technological end coz AMD cant cram more transistors into Athlons anymore. But processing power has never been this cheap!

shock:: nice tip!!! Are you in IT? :D

Kimps, palagay ko settings lang yan. Try downloading a newer version of IE. :D

The Largest Car Forum in the Philippines

Anything And Everything Pc

Thread Tools

Search Thread

Display