Anything And Everything Pc

[krscla]

GlennSter:

Windows XP.

Start >>> Control Panel >>> Performance and Maintenance >>> Power Options >>> Power Schemes.

The monitor will be turned off pero automatically depende sa time na iseset mo.

Kindly visit this link:

http://www.itpo.uwa.edu.au/PC-Power-....html#purchase

[GlennSter]

ah baka un nga nangyayari...nag s standby!!!

salamat sa pagtulong!!!!!!!!!!!!!!!

[pajerokid]

Turning the monitor off while not on the computer is a good practice. Tipid sa kuryente and less wear & tear sa monitor, whether CRT or LCD :D

[alnr]

pajerokid,
ayus nga sa setup!! pano mo na overclock? yung nabasa ko kasi eh kailangan pa i-short yung L1 & L2 sa processor, basta parang ganun.. im using xp2000, ok din naman siya. here's my specs:

processor: amd xp2000+
mobo: ecs l7s7a2(i think)
ram: 256ddr
video: 32mb elsa mx200 (no plans of ugrading kasi 6000 bili ko dun 3yrs ago!!)

temp ko is 39c on idle tapos max ko mga around 45c, im only using oem hsf. i have 2 fans installed in & out and my psu has 2 fans also. tip sa mga pc users, aside from the voltage of your psu, mas maganda kung dual fan yung psu niyo para bawas init sa loob...

GlennSter, sa standby yan kaya ganun yung pc mo. mas maganda i-off mo na lang..

[pajerokid]

alnr,

Yung Athlon T-Bird ko, ginamitan ko pa ng pencil to unlock. Yung Barton ko ngayon diretso na sa bios settings, ayun, ovrclock! :D

Recently, i was having problems with Raven Shield locking up. Pero i found out, yung video card ko pala hindi kumaya, so i reset it to default speeds. Pag naka off yung aircon ko sa room, the temp goes up mga 2-3degrees.

[benchph1]

elo, its me again! im just curious my mboard says the harddisk is running in ata33 access mode, but i've read in my mboard's manual that it supports ata66 and 100.

do i have to buy some kind of IDE cable to enable this feature?
btw my HDD is a 40 gb seagate barracuda.

[alnr]

pajerokid,

ok pala yang barton, pwede mo na i-overclock sa cmos. how much bili mo sa cpu?

benchph1,

baka you still have the old IDE cable. try to buy a new one that supports ata66-100.

[pajerokid]

benchph1, For you to achieve ATA100, your HDD must be able to support it and like, alnr said, you should be using an ATA100 cable. Chances are, your 'cuda is already ATA100. Current standard now is ATA133.

A new standard is SATA. Astig to! Ang nipis ng cable! 6 strands lang yata, the bandwith is comparable daw to SCSI! Pero mahal pa yung drives. a 40GB SATA HDD will set you back around 7000+ sa PCX.

alnr, Php5400 ata. Sabi dun sa foreign computer forums, this is the only barton worth buying. :D Overpriced kasi yung 3000+ and 3200+.

[GlennSter]

salaamt po sa tulong!

[ghosthunter]

My shop's 40 gig HDDs were performing transfer rates in Norton's Ghost at 1Gig/min... grabe! before I would be happy to be getting 300Meg/min with my older 20gig HDDs.

[newbie13]

*alnr yung proc mo palomino pa.You have to unlock it via l1-l2

newer processor like the T-breds doenst need to unlock.Athlon xp 1700 were the most overclockers * 2500 due to the fact it was factory remarked from higher t-breds. There are 2 T-breds A and B.B is the most highly over C'z

[pajerokid]

Ok guys, you'll find this very interesting....

My OC'd Barton now runs at a cool 47C AT FULL BLAST!!! :evillaugh Whereas before, it used to run at 53degrees!

What i did was get thermaltake's ducting mod. and, at the expense of CPU fan monitoring and with a couple of decibels more of fan noise... i cut off my 80mm fan's thermistor!!! My fan used to be an intelligent, temp controlled unti which only increases revs IF the cpu is burnin! Its now running at full blast all the time! Unfortunately, my rig doesnt boot up if i connect it to the fan header, so i had to power it directly from the PSU.

I have no regrets whatsoever....... (giddy!) Im thinking of OCing even more.... but nah....

[benchph1]

ei pk u might wanna shove an 11-blade radiator fan there (those noisy ones they use for mb's) im sure ull system will run at 0C!
just kiddin....

anyway im back to ask you another Q:
can i install win98 on an NTFS-type harddisk?

[pajerokid]

benchph1..... hahaha! :D I'll consider that someday.

The answer to your Q is Nope. I think....

Only XP (and 2000 yata) can handle both NTFS and FAT32

[alnr]

pajerokid,

double na pala ng price ng processor ko ..

newbie13,

thanks for the info, sayang at hindi T-bred ang nabili ko. pero nabasa ko nga na sulit daw ang 1.7ghz kasi pwede mo siya i-overclock up to 2ghz.

benchph1,

i dont think so, hindi mababasa ng win98 ang ntfs na partition. like what pajerokid said, NT platforms lang ang pwede.

[benchph1]

elo guys ive installed this "pc health" monitoring software and found out that the voltage output of my system is below average:

heres the scenario: i have 2 HDD's, 2 CD-ROM's and recently i added 2 chassis fans.

and heres what appears on the pc-health monitoring software:
v-core- 1.65 v
+3.3 v - 3.39v
+5v - 4.87v
+12v - 11.68v
-12v - 9.06v
5vsb - 4.87v
CPU temp - 48C(idle) 52-55C(full load)
System Temp - 36-37C

if i upgrade to a higher-rated PSU will the voltage output of my system become stable?

btw my cpu is a pIII-733 and PSU is 230V

[pissword]

san makakabili ng infrared or bluetooth device na usb port un gamit na mura lang??? please help para makapost na din ako ng pix dito hehehehe kasi ang mahal eh

[ssaloon]

bought my external IR port in greenhills for around 1.5k. yung itsura nya parang maliit na optical mouse, tapos USB connection din.

[pajerokid]

Pissword, i suggest you get the BT dongle. mas mabilis transfer rate ng BT kesa IR.

benchph1, as long as your pc runs, there's no need for an upgraded psu. however, with your current setup, i think you have a borderline case of PC power shortage. better get a 350W unit. :D

[newbie13]

Enermax 400 watts na pasa sure, mahal nga lang.Or if you want to experiment, add a 2nd PSU kahit another 300/350 generic oks na.Sa Tipid pc they had a cdromslot psu kaya lang d ko alam kung me nagbebenta pa.

We have the same setup kaya lang ako i have 5 ttake fans,2hdd small blowers and a volcano 7 on proc but my 350 watts dual fan can still manage to handle them + 1 CFL light.