New and Used Car Talk Reviews Hot Cars Comparison Automotive Community

The Largest Car Forum in the Philippines

Page 74 of 145 FirstFirst ... 246470717273747576777884124 ... LastLast
Results 1,461 to 1,480 of 2898
  1. Join Date
    Nov 2009
    Posts
    3,522
    #1461
    ^ Add ka lang ng 2T, baka ULSD na yang Total. Sa gravel road may kalampag o kahit sa asphalt road?

    Ayaw ko pa pabuksan AC since no problem pa though next trip sa shop pasusukatan ko high and low side kung within specs pa.

    Battery ko medyo nagpaparamdam na rin dahil siguro lowcharge ng pulley problem ko before.. Nasa 11.5-12V na lang after patayin makina, dati around 12.5V. Medyo lumobo narin ng konti ang cells.

    Subaybayan ko yang chipit mod mo kasabay nun 300+ hP Yd25.

  2. Join Date
    Jul 2008
    Posts
    7,119
    #1462
    Anywhere na may lubak may kalampag sa front left side. Samahan ko yung mechanic sa wednesday, magdadala ako ng megaphone, tapat ko sa tenga nya para marinig .

    Sulit na sulit naman yung 3.5 years for a battery, tibay talaga ng GS. Nagkaproblema pa sa alternator ng lagay na yan.

    Kulit nung 300+ hp nav ano, grabe magpaiyak ng gulong under braking, naubusan agad ng kalsada. Kala ko mababangga hehe

    Nga pala baka barado na rin catalytic converter mo. Yung isang kaedad na rin ng nav natin wala na halos daanan yung exhaust sa cat nya nung binaklas.

  3. Join Date
    Nov 2009
    Posts
    3,522
    #1463
    Anong sound like nya, "bomp", "thud", or yung parang kaldag ng suspension na tumatama sa bakal??

    Isolate mo muna yung hood latch, naka 4x na palit na ako ng electrical tape. Dyan lagi yung sound nun sakin.
    Check mo din yung stabilizers baka nanigas na bushings. Or baka masilip ng senior mechanic mo yung Bilstein mo, case resolved kaagad yan.. haha

    Yung cat ko baka ako nalang magbukas sa next PMS, icheck kodin oil tubes ng turbo sa next oil change ko. MAs gusto ko yung ako gumagawa ika nga may personal touch.. hehe

    Re: whining sound, may hint ako pero wag naman sana.. Timing chain-primary & secondary?? pag naubos yung tensioneer at tumama yung chain tutunog talaga yun..

    Bilib nga ako sa mod nya binungkal na makina pero walang error-code kahit isa.. Calculated lahat bago gawin. Laki ng turbo nya ano, tangal VNT at waste gate na lang sarap ng soundtrip.. Dapat pala yan nirecommend kay pedic.. Yung sakin pag nasira instead na Inconel ang material sa turbine, baka Tefal brand na lang..

  4. Join Date
    Jul 2008
    Posts
    7,119
    #1464
    Quote Originally Posted by 12vdc View Post
    Anong sound like nya, "bomp", "thud", or yung parang kaldag ng suspension na tumatama sa bakal??

    Isolate mo muna yung hood latch, naka 4x na palit na ako ng electrical tape. Dyan lagi yung sound nun sakin.
    Check mo din yung stabilizers baka nanigas na bushings. Or baka masilip ng senior mechanic mo yung Bilstein mo, case resolved kaagad yan.. haha

    Yung bushes ng shocks bago with the shocks e. Baka naman color blind din, di mahalata yung Bils hehe. Nagawa ko na rin yung electrical tape hood latch mod..

    Quote Originally Posted by 12vdc View Post
    Re: whining sound, may hint ako pero wag naman sana.. Timing chain-primary & secondary?? pag naubos yung tensioneer at tumama yung chain tutunog talaga yun..
    Don't say bad words! Wag naman yun

  5. Join Date
    Apr 2011
    Posts
    256
    #1465
    gusto kong sumali sa nav club pero di ko alam kung san ang eb. san babayaran etc etc. gusto ko nung susi na kasama na yung remote (

  6. Join Date
    Jul 2008
    Posts
    7,119
    #1466
    *jay
    PM'd you.

  7. Join Date
    Nov 2009
    Posts
    3,522
    #1467
    Bought some LEDs at ace to replace cabin lamp. Light is much much better now.

    Pero mejo bitin pa ako, i need something na LED near the brightness of CFL. Anyone have any idea kung saan shop may nag ooffer ng LED na mas maliwanag?


  8. Join Date
    Aug 2009
    Posts
    411
    #1468
    undergoing surgery..




  9. Join Date
    Apr 2011
    Posts
    256
    #1469
    para sa lahat ng naka 4x2. ano ba dapat PSI ng gulong sa harapan? 39 psi ba? sa likuran? di ko kasi ma gets yung sticker na asa pinto eh. thanks!

    nakalagay sa sticker

    Front H 2.7 (270) 39
    Front M 2.7 (270) 39
    Rear H 3.6 (360) 52
    Rear M 4.5 (450) 65

    siret na... ano ibig sabihin nyan?

  10. Join Date
    Jul 2011
    Posts
    399
    #1470
    Sir, depends na sayo yun tire pressure. Depends na sa choice mo, if you feel the ride is quite bumpy try lowering the pressure for both front and rear. Just dont go below 32 psi

  11. Join Date
    Feb 2010
    Posts
    127
    #1471
    *jay 185:

    i dont have 4x2 nav but this piece of info is also on the side of my door (a bit different nmber on the 4x4), and i assume it means:
    H = heavy loads
    M = medium loads
    for the front the 2.7 means 2.7 kgf/cm2; the 270 is in kPa and the 39 is PSI (dfferent units of pressure)

    if you ask me, masyado mataas yun 52 and 65 for the rear. dont know if the 4x2 owners follow that but the ones i know only use less than 35psi front and rear. i use 35 psi on all 4 tires (4x4).

  12. Join Date
    Nov 2009
    Posts
    3,522
    #1472
    Quote Originally Posted by jay185 View Post
    para sa lahat ng naka 4x2. ano ba dapat PSI ng gulong sa harapan? 39 psi ba? sa likuran? di ko kasi ma gets yung sticker na asa pinto eh. thanks!

    nakalagay sa sticker

    Front H 2.7 (270) 39
    Front M 2.7 (270) 39
    Rear H 3.6 (360) 52
    Rear M 4.5 (450) 65

    siret na... ano ibig sabihin nyan?
    Front/Rear (S) BAR (KPa) PSI

    (S)iret din ako sa H & M, palagay ko Mud and Highway yan.

    Pero daily drive usually asphalt highway using 4x4 wheels eto gamit ko 32 front, 35 rear.

  13. Join Date
    Nov 2009
    Posts
    3,522
    #1473
    Cabin lamp mod. 6watts filament type VS 2w & 1W LEDs
    Rear lamp - Near CFL brightness LED 4x4 matrix.
    For the front, i will just solder the 2 nichia LEDs to make it parallel.

  14. Join Date
    Nov 2009
    Posts
    3,522
    #1474
    Oil Catch Can candidate #2.. Very deep base, large thread(starts at 1/2") non restrictive, w/ bracket, all parts replaceable including gasket.. Will work on this on holidays.

  15. Join Date
    Feb 2010
    Posts
    127
    #1475
    Quote Originally Posted by 12vdc View Post
    Oil Catch Can candidate #2.. Very deep base, large thread(starts at 1/2") non restrictive, w/ bracket, all parts replaceable including gasket.. Will work on this on holidays.
    ang laki nyan ah. oil catch can ba or water filtration system ang project mo?

  16. Join Date
    Nov 2009
    Posts
    3,522
    #1476
    Quote Originally Posted by glennhmd View Post
    ang laki nyan ah. oil catch can ba or water filtration system ang project mo?
    lolz.. Imo-modify kopa yan. Kataon lang yan yung nag qualify sa requirement ko.
    Ok nga yan malalim, kasi kung mababaw, makulit yung oil gumagapang sa sidings. At least yan mahihirapan sila gumapang, or add ako ng steel wool-nakakatakot lang baka gumapang din..

    5/8" yung stock PCV hose, then baka 3/4 or 1/2 kunin ko na filter head. NPT barbed fitting then pronto tapos na.

    Meron pa pala.. saan ko ilalagay yan, masyadong malayo na sa tabi ng secondary FF..
    Tangalin ko na lang kaya permanently yung radiator shroud baka magkaroon ng space, wala naman kasi pakinabang..hehe

  17. Join Date
    Apr 2011
    Posts
    256
    #1477
    hmmmm kung susundin ko naman yung Front 39 PSI / Rear 65 PSI magiging sobrang bumpy ng ride pero tataas ang fuel economy ko/

  18. Join Date
    Mar 2008
    Posts
    529
    #1478
    * 12vdc: meron silbi yung shroud, pag wala nun bagsak ang efficiency ng fan. magkakarun ng mga hot saka cold spots

  19. Join Date
    Nov 2009
    Posts
    3,522
    #1479
    Quote Originally Posted by jay185 View Post
    hmmmm kung susundin ko naman yung Front 39 PSI / Rear 65 PSI magiging sobrang bumpy ng ride pero tataas ang fuel economy ko/
    Sa stock 4x2 tires pa lang 11-13kpl madali makuha. IMO kung hindi lang din loaded above 300kgs, 35 PSI ok na.

    Quote Originally Posted by cydepx44 View Post
    * 12vdc: meron silbi yung shroud, pag wala nun bagsak ang efficiency ng fan. magkakarun ng mga hot saka cold spots
    Sabagay tama ka doon. Wala pa naman auxilliary fan para sa aircon. Pero 1 week walang shroud si Nav while troubleshooting the alternator sound, no significant effect sa Water Temp sa scanguage, or maybe because tag ulan noon..

    Ang luwag sana ng engine bay ano. Then wala na rin yung EGR tube. then next yung front valence..

  20. Join Date
    Sep 2011
    Posts
    9
    #1480
    Good day, UMC silently release to our shores the new Navara Tech Xtreme variants this week. Any updates and leaks guys:megaphone:?

    NAVARA 4X4 TECH XTREME Manual Transmission - Php 1,438,000.00
    NAVARA 4X4 TECH XTREME Automatic Transmission - Php 1,498,000.00

    Universal Motors Corporation

Tags for this Thread

Nissan Frontier Navara [continued]