Nissan Frontier Navara [continued]

[adjrin12]

Yung limp mode. Try to change fuel and air filter. 2nd fill up other diesel brand then observe.
Klakklak sound flywheel yan. Usually 50-70 up kms lumalabas yan. Yan sakit Ng Navara.


Sent from my iPhone using Tapatalk

sir kung flywheel ang sakit sa bulsa. any suggestion san pwedi paicheck kung flywheel talaga yun problema or ano pwedi remedy and kung san pwedi bumili at magpagawa. Thanks.
my tumingin kasi ang unang sabi mukang release bearing daw. muntik ko na nga palitan cluctch assembly

[adjrin12]

[QUOTE=Wh1stl3r;2819159]Limp mode ba talaga? Aside from Leo_Arz's suggestions your intercooler and intake may also be clogged due to accumulated EGR soot + PCV mist. Suction control valve is rarely an issue for the D40. I would have the intercooler and intake piping leaned out, the PCV fitted with a good oil catch can and block the EGR.[/QUOTE

one day biglang hindi lumalagpas ng 2.5k rpm and nun tinakbo sobrang under power as in hanggan 40kph lang kaya.

[Leo_Arz]

sir kung flywheel ang sakit sa bulsa. any suggestion san pwedi paicheck kung flywheel talaga yun problema or ano pwedi remedy and kung san pwedi bumili at magpagawa. Thanks.
my tumingin kasi ang unang sabi mukang release bearing daw. muntik ko na nga palitan cluctch assembly

Pa check mo sa casa. Wala naman bayad yun. Sa casa ako nagpagawa dati 65k inabot. Sa iba 100k plus vat pa.


Sent from my iPhone using Tapatalk

[Wh1stl3r]

one day biglang hindi lumalagpas ng 2.5k rpm and nun tinakbo sobrang under power as in hanggan 40kph lang kaya.

I suggest you bring it in to a competent diesel shop so they can troubleshoot it. Kaya naman ma eliminate lahat yan. Pero gawin mo muna lahat ng kaya mo:

1. Remove the negative battery terminal.
2. Change air filter. Also check the intake hose for blockage and clean it.
3.Check the turbo shaft for excessive XYZ play or damage to the blades on the intake side.
4. Check the EGR and PCV hose for blockage.
5. Pull out MAF sensor and spray it with contact cleaner several times and let it air dry then put it back.
6. Change both fuel filters. Make sure you bleed the fuel system for air by using the primer.
7. Reconnect the battery. Your ecu should have been reset by now.

If it still has low power, blockage may be in the intercooler or it may have to do with SCV. Or maybe injectors or fuel pump. But I doubt it as your Navara is relatively new (ish).

[hinlog]

Ung buga ng ac after more than 2hours drive biglang humina..then, balik sigla after an hour or two, what could be the source? Wala naman sign na nagyeyelo externally. Thanks

Sent from my SM-G610Y using Tapatalk

[Wh1stl3r]

Ung buga ng ac after more than 2hours drive biglang humina..then, balik sigla after an hour or two, what could be the source? Wala naman sign na nagyeyelo externally. Thanks

Sent from my SM-G610Y using Tapatalk

Napaservice na ba yung a/c? Hula ko lang baka may bara na or on its way out na yung compressor.

[12vdc]

Ung buga ng ac after more than 2hours drive biglang humina..then, balik sigla after an hour or two, what could be the source? Wala naman sign na nagyeyelo externally. Thanks

Sent from my SM-G610Y using Tapatalk

Pasukatan mo muna sa AC shop, libre naman yun. Baka nagbawas/may butas narin. Ganyan symptoms saakin, intermittent. My guess is air acts also as refrigerant when compressed kya may konti lamig.

[12vdc]

Actually bro may cabin filter slots yung D40, ang nakalagay nga lang sa loob for lack of a better term, are placeholders? If you take those out pwede sya lagyan ng filters. 2 maliit yung needed. Di lang ako nakapagtanong pa ng cabin filters sa suppliers.

If your'e referring to the slot in the blower motor besides the fan speed resistor, then mine is sealed. Havent Diyd it yet will require cutting the cover to make the opening. i thought 1pc pollen filter element lang yun?

Nagka limp mode din ako recently but no time to check the parts. I just removed the largest OCC in tsikot Hindi ko narin maasikaso linisin eh. Wala na ulit garden hose sa engine bay. lol.

[Wh1stl3r]

Yes bro I think I cut it years ago. After removing the cover, inside there are two plastic cartridges that have holes in them where the cabin filters should be. Afaik ito yung cabin filter natin:

MANN-FILTER Online Catalog Europe - Product Details Cabin Filter CU 25 1-2

Should be the same dimensions but I really haven't checked. Will try to do that tomorrow.

[hinlog]

Napaservice na ba yung a/c? Hula ko lang baka may bara na or on its way out na yung compressor.

Thanka sir 12vdc and wh1stlr for the input...badtrip lang kasi in the middle of the traffic nagluko, out of town pa naman kami. Napa check na ac few months.ago regular cleaning lang naman ginawa.

Sent from my SM-G610Y using Tapatalk

[val_1477]

i'm satisfied with my pioneer avh-p3250dvd:



cheapest branded 2-din touchscreen hu (i think) for only 18k

sir anu format video for pioneer touch screen player? di mg play sa akin ehh

[Wh1stl3r]

sir anu format video for pioneer touch screen player? di mg play sa akin ehh

Not sure but regular DVDs work on mine no problem.

Had the DBA Enshield rotors installed with EBC Greenstuff pads at Speedyfix last Monday:



Good riddance warped OEM rotors. The DBA rotors look great with the anti rust coating, but the Greenstuff puts out so much brake dust. I hope these pads improve once bedded in. OEMs are much cleaner.

Also had Provent 150 installed. Will post pics tomorrow.

[Wh1stl3r]

Provent 150 installed:



Pardon the dirty engine bay. Am still hoping to find a way to make it completely vertical. Provent 200 inlet and outlet are much more easily adjusted to a suitable position.

[hinlog]

Repairable pa ba ito? Naputol kasi ung clip. Sabi sa casa, palit bumper na daw. Thanks

Sent from my SM-G610Y using Tapatalk

[Wh1stl3r]

Repairable pa ba ito? Naputol kasi ung clip. Sabi sa casa, palit bumper na daw. Thanks

Sent from my SM-G610Y using Tapatalk

Do you have a picture of the clip? A pic on the other side of the bumper would help.

[val_1477]

yup. Not sure bro. Let's wait for 12vdc to reply.

Selling my slightly used ome 2607 springs. Advertised lift is 30mm but in the 4x2 actual lift (stock bumper) is 50mm. I have to lift my rear again if i want to keep these in front. Spring rate is very close to stock.

how much sir picture and contact number?

[Wh1stl3r]

how much sir picture and contact number?

Sir PM sent.

[hinlog]

Not sure kung clip ba ang tawag dito pero dahil naputol ung isa parang nabubunot na ung iba kaya tinalian ko pansamantagal😁. Also, I noticed ung d40navara malapit samen, ganyan din ang problema niya sa rear bumper. Tia.

Sent from my SM-G610Y using Tapatalk

[Wh1stl3r]

Not sure kung clip ba ang tawag dito pero dahil naputol ung isa parang nabubunot na ung iba kaya tinalian ko pansamantagal😁. Also, I noticed ung d40navara malapit samen, ganyan din ang problema niya sa rear bumper. Tia.

Sent from my SM-G610Y using Tapatalk

Ask the usual guys, Youngbros or Yen in Banawe, Nisway (somewhat near Mickey's Autosound) in Amang Rodriguez. I would call first. Baka may mga alam silang remedyo.

Weird lang, sa akin 9 years old na wala naman ganyan problema. Baka maraming kids na sumasabit sa likod mo at nagtatatalon sa step na yan.

[hinlog]

Okay, salamat muli.

Sent from my SM-G610Y using Tapatalk