House Constuction [Merged]

[papi smith]

Guys, haven't really back read all the way but would like tp ask if someone had experienced building house/bldg. via this new Reinforced Foam concrete system. Saw in FB about SRC panel and M2 panel....So any personal feedback on them? Sabi mas makakatipid daw of both time and money and mas stronger ang structure..

I did consider these alternatives, but the problem was the skill required to put these up. Sayang ang bilis nito if hindi sanay ang tao mo gumamit nito, lalabas na mas mabilis sila sa nakasanayan nilang chb. Another problem here is that the plumbing and electricals should be well planned kasi dapat naka layout na bago bugahan ng concrete. Mas mahirap gumawa ng changes sa layout vs chb.

I did a combination of formblocks and chb as I wanted minimal abala sa neighbor ko where my firewall is located, but nakita ko sa actual na mas mabilis sila sa chb kaysa sa formblocks, anyway the time savings here is because I didn't need to plaster anymore and there were no electricals or plumbing on this side.

[Jiggs]

Thanks guys....looks like this will be a good alternative...if makakakuha lang ng builder na sanay na dun sa method of constructing with that material. Very good insulation both acoustic and heat. Very keen on getting direct hand experience.

[papi smith]

Just saw the duragates sliding cantilever gate, but looks expensive, are there local manufacturers here?

[travajante]

Just saw the duragates sliding cantilever gate, but looks expensive, are there local manufacturers here?

There are local custom gate manufacturers who can do cantilever gates, automated or manual. You may have to source your own Comunello tracks & rollers, if you wish em, papi sir. Our go-to fabricator here overbuilds his rollers & has his custom top guide wheels rubber treaded. These are time tested to remain smooth & light....Never saw the need to go Comunello.[emoji108]

Sent from my SM-G970F using Tapatalk

[gongrhey]

Bros, where can I get a copy of the certificate of occupancy? I'm expanding our garage. Need to apply building permit pero requirement yung occupancy permit. Wala kaming copy nun, since na turnover from subdivision developer. We inquired sa head office ng developer sabi sa subdivision admin daw pero wala rin silang kopya.

[Ketib]

Bros, where can I get a copy of the certificate of occupancy? I'm expanding our garage. Need to apply building permit pero requirement yung occupancy permit. Wala kaming copy nun, since na turnover from subdivision developer. We inquired sa head office ng developer sabi sa subdivision admin daw pero wala rin silang kopya.

For me imposibleng wala. Pero try mo sa OBO/CEO/MEO sir.
Who asked occupancy permit?

Sent from my SM-A600G using Tapatalk

[gongrhey]

For me imposibleng wala. Pero try mo sa OBO/CEO/MEO sir.
Who asked occupancy permit?

Sent from my SM-A600G using Tapatalk

Sa QC city hall bro sa building permit section nag aapply kami. Di ko kabisado yung OBO/CEO/MEOacronyms. Thanks for the reply.

[gongrhey]

Edit, kuha ko na acronyms Office of the Building Official, City Engineering Office, Municipal Engineering Office. Will try sa kanila.

[dr. d]

Edit, kuha ko na acronyms Office of the Building Official, City Engineering Office, Municipal Engineering Office. Will try sa kanila.

i always tell my trainees,
"always spell out your acronyms. outside our building, these letters may not be intelligible or mean the same thing to them, as they do to us.."

[papi smith]

There are local custom gate manufacturers who can do cantilever gates, automated or manual. You may have to source your own Comunello tracks & rollers, if you wish em, papi sir. Our go-to fabricator here overbuilds his rollers & has his custom top guide wheels rubber treaded. These are time tested to remain smooth & light....Never saw the need to go Comunello.[emoji108]

Sent from my SM-G970F using Tapatalk

Thanks Sir Travis, just saw this now, I'll try asking around. Btw, what's a good brand of miniature circuit panel boards and breakers, thanks ,[emoji4]

[travajante]

Thanks Sir Travis, just saw this now, I'll try asking around. Btw, what's a good brand of miniature circuit panel boards and breakers, thanks ,[emoji4]

Check Schneider, sir.

Sent from my SM-G970F using Tapatalk

[papi smith]

Sir Travs, I don't see the Schneider brand when I go to Wilcon or All Home, most common I think are China brands

[travajante]

Sir Travs, I don't see the Schneider brand when I go to Wilcon or All Home, most common I think are China brands

Try calling to find their dealers, sir.

Sent from my SM-G970F using Tapatalk

[papi smith]

Thanks Sir Travs, just came from Wilcon and they have Schneider MCBs but no panels, CW has Chint MCBs

[papi smith]

https://shopee.ph/product/80008233/1...400?smtt=0.0.9

Has anybody tried this? Will this fit our standard utility box?

[dr. d]

https://shopee.ph/product/80008233/1...400?smtt=0.0.9

Has anybody tried this? Will this fit our standard utility box?

i haven't tried it, but i suspect, it should fit.
no one will buy it, once it is found that it wouldn't fit already-existing standard boxes.

[shadow]

Meron available sa mga ace and True value, sigurado ka na fit sa junction box sa atin.


Sent from my iPhone using Tapatalk

[papi smith]

Thanks for the tip Sir Shadow.

Doc D, nag tyaga ako maghanap ng mga reviews about this and apparently, UK standard daw ito, much larger than our standard box sizes [emoji28]

[dr. d]

Thanks for the tip Sir Shadow.

Doc D, nag tyaga ako maghanap ng mga reviews about this and apparently, UK standard daw ito, much larger than our standard box sizes [emoji28]

oops...

bili na lang ng extension cord with multiple type jacks on the box.

[ocanursjr]

Has anyone used VAZBUILT Technology to build their dream homes, apartment, buildings, and even fences? I think the thread starter asked the same question. Anyone?