All New 2017 Mazda 3

[travajante]

Tested the HKS Hi-Power Spec-L bolt-on axleback for a while. Too loud & the drone was unbearable.[emoji852] RacingBeat still can't be beat! Good thing this wasn't irreversible.[emoji106]

[jojopad]

Tested the HKS Hi-Power Spec-L bolt-on axleback for a while. Too loud & the drone was unbearable.[emoji852] RacingBeat still can't be beat! Good thing this wasn't irreversible.[emoji106]

How about Borla, like this one?

Mazda 3 SkyActiv 2. axle back piping... - Atoy Customs 4x4 and Bodykits

[travajante]

How about Borla, like this one?

Mazda 3 SkyActiv 2. axle back piping... - Atoy Customs 4x4 and Bodykits

That's the Borla Pro XS Atoy customizes to fit various makes/models, B1 sir.[emoji4] There are a number of Pro XS models you can choose from for various applications.

Borla has this BM/BN specific axleback below. The drawback? Too many clamped joints. Alignment has been a known issue.


Sent from my SM-G970F using Tapatalk

[jojopad]

So it looks like Racing Beat axle-back is still the simplest and best exhaust for the M3.

[travajante]

So it looks like Racing Beat axle-back is still the simplest and best exhaust for the M3.

Best balance of performance, sound & aesthetics. Quality is topnotch. Fit... precise, no massaging needed. Plus, it retains the stock's aero diffuser feature. RacingBeat was tasked by MazdaUSA to have this axleback built way back 2013 for their SEMA Clubsport 3.

Sent from my SM-G970F using Tapatalk

[shifty_md]

Good morning. Sorry for the noob question, but has anyone here tried enabling Android Auto on their 2017 M3 using the USB Dongle available for purchase in Lazada? Would like to hear from you. Thanks.

[travajante]

Good morning. Sorry for the noob question, but has anyone here tried enabling Android Auto on their 2017 M3 using the USB Dongle available for purchase in Lazada? Would like to hear from you. Thanks.

The OE AA/CP module, yes. Dongle? You might be the 1st. Please keep us posted. Thanks!

Sent from my SM-G970F using Tapatalk

[jojopad]

Best balance of performance, sound & aesthetics. Quality is topnotch. Fit... precise, no massaging needed. Plus, it retains the stock's aero diffuser feature. RacingBeat was tasked by MazdaUSA to have this axleback built way back 2013 for their SEMA Clubsport 3.

Sent from my SM-G970F using Tapatalk

Is it possible to have the axleback shipped here in PH directly by Racing Beat? Any concerns with customs, tax? Usually what's the estimate days for delivery?

[travajante]

Is it possible to have the axleback shipped here in PH directly by Racing Beat? Any concerns with customs, tax? Usually what's the estimate days for delivery?

You'll likely be spanked by shipping & customs, sir. See how big the box is from RB?

Sent from my SM-G970F using Tapatalk

[travajante]

A bud has this spare set, used for a week, he's planning to sell hobo.
Reason: Too many spare sets.[emoji16]
Rota RT5
Size: 18x8.5
PCD: 5X114.3
Offset: et44
For those interested, please PM for his contact details. Thanks!

Sent from my SM-G970F using Tapatalk

[buknoii]

Thanks for the post regarding rattling sound in thr front driver side. I recorded the actual sound and screen cap the fix. I hope they can also do it in 2 days here in Davao

Sent from my SM-N960F using Tapatalk

[RedlineJunkie]

Falken Azenis FK510 vs Yokohama Advan Fleva V701
How much for 225/45/18? Which one is the best tire for our Mazda 3?


Sent from my Nokia 3210 using Tapatalk

[travajante]

Falken Azenis FK510 vs Yokohama Advan Fleva V701
How much for 225/45/18? Which one is the best tire for our Mazda 3?


Sent from my Nokia 3210 using Tapatalk

Michelin Pilot Sport 4....Ask Achievers Sales, sir.

Sent from my SM-G970F using Tapatalk

[roblarg]

Hi thread!

I just collected the plates for my Mazda 3 2017 hatch from the dealer and had them install it.

I already have the plate relocator installed so the front looks great!... but I didnt realize there is no plate holder on the back so the rear plate looks terrible just sitting there all flat like and against the paint

Is there a black plate holder i can get for the rear, do they sell them at blade or concorde? the rear plate holder on Sir Travs picture looks perfect.

I'm hoping i didn't mess up and they aren't those anti tamper screws i've been hearing about and that the ugliness at the rear can be undone

Also, I read something way back that accessories attached to the license plate aren't allowed and will be fined if caught, anybody have any experience with this?

Thanks!

[travajante]

Hi thread!

I just collected the plates for my Mazda 3 2017 hatch from the dealer and had them install it.

I already have the plate relocator installed so the front looks great!... but I didnt realize there is no plate holder on the back so the rear plate looks terrible just sitting there all flat like and against the paint

Is there a black plate holder i can get for the rear, do they sell them at blade or concorde? the rear plate holder on Sir Travs picture looks perfect.

I'm hoping i didn't mess up and they aren't those anti tamper screws i've been hearing about and that the ugliness at the rear can be undone

Also, I read something way back that accessories attached to the license plate aren't allowed and will be fined if caught, anybody have any experience with this?

Thanks!

Don't worry, choose a non-bling frame that sit behind the license plate, not over it. The new LTO-issue doesn't come w/ irreversible srews/bolts, so your rear should be removable.

Sent from my SM-G970F using Tapatalk

[jojopad]

For the rear plate, I installed these pads behind the plate, providing some scratch protection to the paint. That gap behind the plate also helps reduce the accumulation of dirt on the paint. It makes it easier to wash the area behind the plate.

[roblarg]

Thanks for the replies Sir Travs and Sir Jojo. Visited a blade store last night to no luck, will try concorde this weekend or might just opt getting one from Lazada. Will try Sir Jojo's tip with the gripping pads in the meantime

[JohnM]

Thanks for the replies Sir Travs and Sir Jojo. Visited a blade store last night to no luck, will try concorde this weekend or might just opt getting one from Lazada. Will try Sir Jojo's tip with the gripping pads in the meantime

Try Ace and True Value. Just bought some of those protectors for a new coffee table.

Sent from my SM-A605G using Tapatalk

[RedlineJunkie]

Thanks for the replies Sir Travs and Sir Jojo. Visited a blade store last night to no luck, will try concorde this weekend or might just opt getting one from Lazada. Will try Sir Jojo's tip with the gripping pads in the meantime

Etch MyPlate on Instagram: “#mazda3 #mazdaspeed3
#PlateBackingAndProtector

Thank you po Mam Stephanie 🙏. Plate backing and protector mounted on red hot Mazda 3 🔥💋”

This might help. Look for etch myplate at Instagram..

Sent from my Nokia 3210 using Tapatalk

[reptar]

I've been eyeing a second hand 2017 model of the 3 (can't afford the new model yet and) here in Australia. Any particular issues I should look out for? Mileage is around 50k already. I badly need a car to get around and out of the city