2014 Mazda 3

[jojopad]

Ayaw haha. Sa dami ng lubak dito mahirap na.

34 lang ako ngayon. Baka taasan ko rin. Sa 16 kasi ramdam ang bigat ng manibela if the pressure goes below 34.

Hubcentric rings arrived. Hope they fit

36psi for my stock M3 18" wheels and dunlop tires. I would raise it to 41 with full passenger load.

Daming potholes around my area. Better be safe.

[bugsmobile]

36psi for my stock M3 18" wheels and dunlop tires. I would raise it to 41 with full passenger load.

Daming potholes around my area. Better be safe.

Hmmm same din na 36 for 225/45/18?

[travajante]

Recommended pressure of 36 is for fuel economy & tread wear. Look at the M2's on 19s w/ 35 aspect ratio.
Have always had mine no higher than 33 cold.

Sent from my SM-G970F using Tapatalk

[vinrem]

Today, I asked a friend back in China to bring my Mazda 3 to the CASA for maintenance, it's already 1.5 years since it was last started, it's just sitting in the underground parking at the apartment since January of 2020. I have no choice bcoz the car registration is about to expire, the car is already 6 years old and it is scheduled to be brought to the transportation bureau for check up (like our PMVIS here) before it will be given clearance if it's still road worthy or not. Anyway, I ask my friend to book a towing service as I was expecting that the car won't start and also better to have it put in a flat bed truck rather than drive it to the CASA, but to my surprise, the car started and still according to my friend runs smoothly, he has to start it and drive it up to the parking area as the flat bed truck can't go down the underground parking. As expected, the interior has molds and the car exterior is full of dust, but can be remedied by a full car detailing service. What the CASA did was replaced the engine oil, oil filter, air filter, AC filter and engine coolant.

Sent from my ONEPLUS A6003 using Tsikot Forums mobile app

[dr. d]

Today, I asked a friend back in China to bring my Mazda 3 to the CASA for maintenance, it's already 1.5 years since it was last started, it's just sitting in the underground parking at the apartment since January of 2020. I have no choice bcoz the car registration is about to expire, the car is already 6 years old and it is scheduled to be brought to the transportation bureau for check up (like our PMVIS here) before it will be given clearance if it's still road worthy or not. Anyway, I ask my friend to book a towing service as I was expecting that the car won't start and also better to have it put in a flat bed truck rather than drive it to the CASA, but to my surprise, the car started and still according to my friend runs smoothly, he has to start it and drive it up to the parking area as the flat bed truck can't go down the underground parking. As expected, the interior has molds and the car exterior is full of dust, but can be remedied by a full car detailing service. What the CASA did was replaced the engine oil, oil filter, air filter, AC filter and engine coolant.

Sent from my ONEPLUS A6003 using Tsikot Forums mobile app

"we sometimes under-estimate modern auto technology."
heh heh.

[Archerfish]

Today, I asked a friend back in China to bring my Mazda 3 to the CASA for maintenance, it's already 1.5 years since it was last started, it's just sitting in the underground parking at the apartment since January of 2020. I

Sent from my ONEPLUS A6003 using Tsikot Forums mobile app

Amazing! It still started. My brother's CX-5 "died" when he went to the US for two months only.

[vinrem]

Amazing! It still started. My brother's CX-5 "died" when he went to the US for two months only.

Yup, I was expecting it won't start hahaha.

Sent from my ONEPLUS A6003 using Tsikot Forums mobile app

[JohnM]

Tibay ng battery

What's a good set of pads that have better bite than OEM?

[Egan101]

Tibay ng battery

What's a good set of pads that have better bite than OEM?

Go Brembo na! Puwede rin Akebono.

Message mo si Wh1stl3r. He can help you.


Sent from my iPhone using Tapatalk

[JohnM]

Go Brembo na! Puwede rin Akebono.

Message mo si Wh1stl3r. He can help you.

Yup got a quote from him last year. Medyo malapit lang pala sya via C6.

[Egan101]

Yup got a quote from him last year. Medyo malapit lang pala sya via C6.

Gusto mo sabay tayo? I will be going to Wh1stl3r next Tuesday.


Sent from my iPhone using Tapatalk

[vinrem]

Tibay ng battery

What's a good set of pads that have better bite than OEM?

I think I used yaesu brand battery.

Sent from my ONEPLUS A6003 using Tsikot Forums mobile app

[JohnM]

Gusto mo sabay tayo? I will be going to Wh1stl3r next Tuesday.

Sige balitaan kita. If I finish enrollment on Monday then sabay ako.

[Egan101]

Sige balitaan kita. If I finish enrollment on Monday then sabay ako.

Morning ako punta. Manggagaling pa ako Paranaque eh.


Sent from my iPhone using Tapatalk

[bhybhoy]

Ano po gamit nyo coolant?

Salamat 😊

[yapoy86]

Ano po gamit nyo coolant?

Salamat 😊

FL22 per manual..

[Egan101]

FL22 per manual..

You can use Ravenol HJC, around 800 per 5L container at Lazada




Sent from my iPhone using Tapatalk

[bhybhoy]

You can use Ravenol HJC, around 800 per 5L container at Lazada




Sent from my iPhone using Tapatalk

Salamat po

[bhybhoy]

You can use Ravenol HJC, around 800 per 5L container at Lazada




Sent from my iPhone using Tapatalk

Sir, pede po ba sya top up or dagdag lang meron pa kase kalahati o kelangan i drain ko muna?

[Egan101]

Sir, pede po ba sya top up or dagdag lang meron pa kase kalahati o kelangan i drain ko muna?

Kung magpalit ka coolant, better to drain the current one and replace with a new one.


Sent from my iPhone using Tapatalk