2014 Mazda 3

[squidbolz]

Salamat guys sa input hehe yep di ko muna pinatira yung decarbonization at nasa 4.7k pa lang mileage ko hehe

Sent from my LG-H815 using Tapatalk

[oneian]

Sirs, is it a good idea do ditch the spare tire and get myself an inflation kit (sealant/compressor)?

[dr. d]

Sirs, is it a good idea do ditch the spare tire and get myself an inflation kit (sealant/compressor)?

i'd feel uncomfortable driving around without my spare tire.
i have already had at least two catastrophic flat tires in the metro.. had to replace them, as re-inflating them would have been dangerous. the hole was too large in one event, and the other one had a fractured sidewall...
of course, i found out about their dangerous condition, in the tire shop when i brought them in for the usual patching.

[Yatta]

Sirs, is it a good idea do ditch the spare tire and get myself an inflation kit (sealant/compressor)?

Any reason why you want to unload the spare? It doesn't take that much space, nor weight IMO. Ang alam ko na gumawa niyan yung mga nagpalagay ng LPG kits.

I have one of those sealant/tire inflators in a can from the US but I'm not sure if its safe to carry since it says on the label "keep out of hot areas (including inside cars)". I'm guessing pang-garage use lang?

[oneian]

Any reason why you want to unload the spare? It doesn't take that much space, nor weight IMO. Ang alam ko na gumawa niyan yung mga nagpalagay ng LPG kits.

I have one of those sealant/tire inflators in a can from the US but I'm not sure if its safe to carry since it says on the label "keep out of hot areas (including inside cars)". I'm guessing pang-garage use lang?

I see. Thanks for the insight.

[travajante]

Tagal ko na palang di nagagawi dito

Anyway, James brah, would you mind if the FL22 is available at our suking auto supply shops, especially those shops who only sell Mazda parts? Pasig forgot to sell one to me at hindi ko alam kelan ako babalik doon for my insulator installation

I know it's available thru Amazon & local dealerships. Auto Supplies buy from dealers, too, if you order from them, brah.

Guys question sa 20k pms.. Inalok ako ng decarbonize ng sasakyan.. Di kasama sa yojin.. Worth 4k daw.. Di ko muna pinatos at magtatanong muna... Any inputs sir? Tska kasama ba sa yojin pagpalit ng spark plugs? Ang nakalagay kasi sa service, inspect lang hehe. Though 4.7k pa lang takbo ni m3... Thanks sa inputs

Nah, I'd push this as back til when necessary. What do they actually do? Remove the head for walnut blasting decoke? I doubt....probably just some deposit cleaner, BK44, Seafoam & injector cleaning.

Sirs, is it a good idea do ditch the spare tire and get myself an inflation kit (sealant/compressor)?

The spare gives me security. Don't ditch, just add a kit for emergency.

[go-to-guy]

Does the new Infotainment version/update fix the shuffling? I always have my mp3s on shuffle but when restarting the car, I have to enable shuffle again. Still have the old version btw.

[testament11]

Does the new Infotainment version/update fix the shuffling? I always have my mp3s on shuffle but when restarting the car, I have to enable shuffle again. Still have the old version btw.

I think yes. Simula nung nag-update ako eh naka-on na palagi ang shuffle sa akin

[go-to-guy]

I think yes. Simula nung nag-update ako eh naka-on na palagi ang shuffle sa akin

Thanks Testa. Welcome back! hehehe!

[squidbolz]

Hi guys for dash cam, meron na ba nag try sa inyo ng go-pro or any equivalent? Im thinking of using that na lang since ayaw ko maginvest at magayos ng clutter ng cords kapag bumili pa ako ng separate na dash cam... Salamat sa inputs again

Sent from my LG-H815 using Tapatalk

[sirkosero]

Hi guys for dash cam, meron na ba nag try sa inyo ng go-pro or any equivalent? Im thinking of using that na lang since ayaw ko maginvest at magayos ng clutter ng cords kapag bumili pa ako ng separate na dash cam... Salamat sa inputs again

Sent from my LG-H815 using Tapatalk

Daan ka sa dashcam thread. Dami dun gumagamit ng sj4k

[Juan Martinez]

Who he? The Brit Santi?😀
Hello, Atty brah....a great weekend ahead!!!

congrats, brah, for that hefty review coming from chazzy j for your m3 plate relocator invention-- fruit of your intellect. may your tribe flourish!

[travajante]

congrats, brah, for that hefty review coming from chazzy j for your m3 plate relocator invention-- fruit of your intellect. may your tribe flourish!

Thanks, atty brah. I haven't shared that review from a US Mown3r on here yet. Just glad, thankful & humbled by the embrace & acceptance that lil detail has seen. The thing I'm most appreciative of from all this???? Friends...the valued, genuine friends that Mown3rship has drawn. You know who you are, guys. Atty brah, you're among them. Hats off!!!!☝

[oliverS]

guys any recommendation on how to decrease that fender gap?.. been thinking of having mine dropped soon..

[1D4LV]

guys any recommendation on how to decrease that fender gap?.. been thinking of having mine dropped as soon..

lowering springs or coil-overs.

[Geo_S]

guys any recommendation on how to decrease that fender gap?.. been thinking of having mine dropped soon..

Tein Htech bro if you do not have funds for the coilovers. Mild drop but almost the same as ride comfort of the stock springs. Many can attest that here. Hehe. If you want with slightly lower stance, H&R.

[travajante]

guys any recommendation on how to decrease that fender gap?.. been thinking of having mine dropped soon..

Tein Htech bro if you do not have funds for the coilovers. Mild drop but almost the same as ride comfort of the stock springs. Many can attest that here. Hehe. If you want with slightly lower stance, H&R.

+1 on Mast3r Geo's advice. If you don't track the car, the HTechs are great for daily street use & gives you that balance of drive, comfort & looks. Don't forget to cut the ftont bumpstops upon installing these.

[kirito]

Guys, I'll be having my spring insulators installed this week. Aside from that, I remember the tech crew who assessed my car saying some welding will be done for the lower control arm? (Mazda Pasig's brainchild for fixing the squeaking noises). Should there be any concerns regarding the welding part of the fix? Any feedback from those who went with this fix?

TIA,
The clueless hobo

[go-to-guy]

+1 on Mast3r Geo's advice. If you don't track the car, the HTechs are great for daily street use & gives you that balance of drive, comfort & looks. Don't forget to cut the ftont bumpstops upon installing these.

Just curious, what are the front bump stops and why the need to cut them when installing HTechs? Wouldn't the installer know to cut them?

[oliverS]

lowering springs or coil-overs.

I believe lowering springs since I have a limited budget