New and Used Car Talk Reviews Hot Cars Comparison Automotive Community

The Largest Car Forum in the Philippines

Page 18 of 20 FirstFirst ... 814151617181920 LastLast
Results 341 to 360 of 385
  1. Join Date
    Jul 2004
    Posts
    8,595
    #341
    tire-valve-sensor.jpg

    Sa akin, the leak was caused by the rubber of the sensor giving way and getting brittle.

    In the picture, the sensor on the bottom is the one without the red rubber while the sensor on the top is the one with the rubber.

    Basically, I replaced the rubber and so far the sensor is good. No more leaks.

    My tire valve stem and its base are all metal so siguro that is why I have no problems with it.

  2. Join Date
    Mar 2008
    Posts
    54,641
    #342
    Quote Originally Posted by 111prez View Post
    tire-valve-sensor.jpg

    Sa akin, the leak was caused by the rubber of the sensor giving way and getting brittle.

    In the picture, the sensor on the bottom is the one without the red rubber while the sensor on the top is the one with the rubber.

    Basically, I replaced the rubber and so far the sensor is good. No more leaks.

    My tire valve stem and its base are all metal so siguro that is why I have no problems with it.
    where did you get the new rubber?

  3. Join Date
    Jan 2009
    Posts
    6,472
    #343
    I put silicone grease on all rubber seals... the same one I use on all my flashlight O-rings. It keeps them lubricated and malleable.

    Dami sa Shopee at Lazada.


  4. Join Date
    Jul 2004
    Posts
    8,595
    #344
    Quote Originally Posted by dr. d View Post
    where did you get the new rubber?
    Cannibalized the rubber from my other TPMS sensor that was no longer functioning. I had one installed in wifey's business van but for some reason, it did not last long. I got exactly the same chinese "make" (not brand) but for some reason, tumagal yung sa akin na nauna pa. Could be the way the driver handled it, or some other reason. Just one of those unsolved mysteries, I guess.

    Good that I kept it and did not throw it away. Just in case, I still have 2 more red rubber plugs on standby.

  5. Join Date
    Dec 2008
    Posts
    352
    #345
    Update ko lang ngpapalit nako ng tire valve na stainless para no worries at matibay na bali all 4 na. yung kakapalit lng n isang tire valve na rubber pinapalitan ko ulit ng stainless para same na lahat. Ang ngyari kasi my bumigay ulit na rubber tire valve sa akin kaya pinapalitan ko na lahat ng stainless. And need e tire balancing kasi medyo mabigat yung stainless tire valve. 130php isang tire valve ok na din compare sa 55php na rubber tire valve. Kng medyo bago bago pa rubber tire valve nyo ok payan..pag medyo 2 years above medyo kailangan na double check na lagi. Para di kayo abutan s byahe. Kasi mabilis mg deflate pag sa rubber tire valve ang bumigay. Ngayon binalik ko na ulit tpms ko dahil stainless na matibay na mga sir kaya no worries sa byahe.. just sharing my experience salamat po..

    Sent from my Nokia 7 plus using Tsikot Forums mobile app

  6. Join Date
    May 2014
    Posts
    14,700
    #346
    Quote Originally Posted by 111prez View Post
    tire-valve-sensor.jpg

    Sa akin, the leak was caused by the rubber of the sensor giving way and getting brittle.

    In the picture, the sensor on the bottom is the one without the red rubber while the sensor on the top is the one with the rubber.

    Basically, I replaced the rubber and so far the sensor is good. No more leaks.

    My tire valve stem and its base are all metal so siguro that is why I have no problems with it.
    bro paano / san mo na source yung rubber replacements?
    thanks!


    oppsss nasagot na pala hehehe

    Sent from my M2012K11AG using Tsikot Forums mobile app

  7. Join Date
    Sep 2021
    Posts
    982
    #347
    Ang useful talaga ng forum na ito.

    After reading through this, I realize unless OEM (like I've seen on some subies), I think aftermarket TPMS's aren't for me (just my opinion). Mahirap talaga ang mods, whether sa engine, body or suspension, etc...

    The tradeoff between convenience is outweighed by premature wear sa tire valves for some cars. If the valve develops a leak in some 'alanganin' na lugar, that kind of defeats the whole purpose. The problem should not be caused by the (supposed) solution for it dapat.

    -Just my 2 centavos.

  8. Join Date
    Jan 2009
    Posts
    6,472
    #348
    Quote Originally Posted by Miles_on View Post
    Ang useful talaga ng forum na ito.

    After reading through this, I realize unless OEM (like I've seen on some subies), I think aftermarket TPMS's aren't for me (just my opinion). Mahirap talaga ang mods, whether sa engine, body or suspension, etc...

    The tradeoff between convenience is outweighed by premature wear sa tire valves for some cars. If the valve develops a leak in some 'alanganin' na lugar, that kind of defeats the whole purpose. The problem should not be caused by the (supposed) solution for it dapat.

    -Just my 2 centavos.
    Kaya nga... tips on how to mitigate the premature failure has been shared. The benefit still outweighs the drawbacks, especially now that the potential problem with screw-on type sensors is preventable.

    Last week lang, na-turnilyo gulong ko. I was just driving out of the gate nung nag-alarm yung TPMS. I drove back in and confirmed nga na may singaw yung isa. All things considered, it was nice to have the luxury of changing the tire in my own garage with power tools and the help of our kasambahay. Kung sa labas ako inabutan ng flat, mas mahirap magpalit.

  9. Join Date
    Sep 2021
    Posts
    982
    #349
    Napa google din tuloy ako to see what a metal tire valve stem looks like.
    I don't think common ito, parang I haven't seen one yet.

    Not too expensive naman sa online sellers. Any drawbacks to this kaya? (if they're that good, they should be OEM na rin siguro?) The only article I've come across online is was a pic on 'how to remove corroded stainless tire valve stems

  10. Join Date
    Mar 2008
    Posts
    54,641
    #350
    Quote Originally Posted by Miles_on View Post

    Not too expensive naman sa online sellers. Any drawbacks to this kaya? (if they're that good, they should be OEM na rin siguro?)
    in car manufacture, every little cost cut, counts.
    a ten-peso unit manufacture savings (X 5 = 50 bucks) comes up to 500,000 peso savings when one has to manufacture 10,000 cars.
    lalo na if manufacturer believes such savings will not cut into its sales numbers at all.

    decades ago,
    the manufacturer decided to save a little, by not installing front sway bars in its cars.
    thus, the corvair was reported to wallow like a pig during turns.
    as a result, the car did not sell as well as it might have.
    by the time they corrected their faux pas, ralph nader had made his epic attack on the car, sealing its fate.
    Last edited by dr. d; December 26th, 2021 at 12:22 PM.

  11. Join Date
    Dec 2005
    Posts
    39,174
    #351
    Quote Originally Posted by baludoy View Post
    The tpms set on our 2 vehicles are at least 3 years old na and i haven't experienced any slow leak due to damaged tire valves.

    Will keep an eye on those na lang din.

    do what you gotta do so you can do what you wanna do
    Same in my case bro... I have 4 sets of external tpms with each at least 4yo and no issue so far other than battery replacement... On the side and could be a factor, I am the only one who is mounting and dismounting them. Will keep these in mind though....

  12. Join Date
    Aug 2021
    Posts
    132
    #352
    Quote Originally Posted by CVT View Post
    Same in my case bro... I have 4 sets of external tpms with each at least 4yo and no issue so far other than battery replacement... On the side and could be a factor, I am the only one who is mounting and dismounting them. Will keep these in mind though....
    Pwede malaman brand sir? Lazada?

    Sent from my SM-A315G using Tapatalk

  13. Join Date
    Dec 2008
    Posts
    352
    #353
    Just an update ito yung stainless tirevalve ko na worth 130pesos s shop mismo binili, ang observe ko na kaibahan nya sa rubber is pag hinigpitan mo yung tpms sensor kahit dmo alalayan yung tirevalve ok sya matigas...img_20211222_192752.jpg

    Sent from my Nokia 7 plus using Tsikot Forums mobile app

  14. Join Date
    Dec 2005
    Posts
    39,174
    #354
    Quote Originally Posted by QUEZ View Post
    Pwede malaman brand sir? Lazada?

    Sent from my SM-A315G using Tapatalk
    IIRC, Zeepin bro. Yes, Lazada.

    4 external sensors and a receiver that is plugged into the cigarette lighter interface. The receiver displays the vehicle voltage, tyre pressure in psi or bar, the tyre temperature in degC or degF... It gives a soft(but high pitched) audible alarm if any of the tyre pressures is outside of your defined limits and if the vehicle voltage is below 12v or something...

    Cost iirc was P1.5K to P1.8K...

  15. Join Date
    Sep 2004
    Posts
    209
    #355
    How long does the battery in the sensor last? I bought my tpms last September 2021 just after a month the battery
    of the f-r sensor already died. I replaced it with Panasonic cr1632 batt and just today wala na rin (3 months & 4 days).
    Btw I already replaced also the battery of r-l and f-l sensor last Nov and Dec 2021. Ang natitirang original battery na lang
    ay yung sa r-r sensor (going 4 months on Jan 28)

  16. Join Date
    Dec 2005
    Posts
    39,174
    #356
    Quote Originally Posted by lancepower View Post
    How long does the battery in the sensor last? I bought my tpms last September 2021 just after a month the battery
    of the f-r sensor already died. I replaced it with Panasonic cr1632 batt and just today wala na rin (3 months & 4 days).
    Btw I already replaced also the battery of r-l and f-l sensor last Nov and Dec 2021. Ang natitirang original battery na lang
    ay yung sa r-r sensor (going 4 months on Jan 28)
    OEM batteries, 1.5 years at least bro...All have been replaced and I have a bank here ready for them.

    I guess I am lucky with my 5 sets...

  17. Join Date
    Jan 2006
    Posts
    12,608
    #357
    I have already replaced three of the valves in the ASX. Maybe the 4th one needs replacement anytime soon. Built-in yung TPMS ng ASX sa HU nya.


    Sent from my iPhone using Tapatalk

  18. Join Date
    Jul 2004
    Posts
    8,595
    #358
    Quote Originally Posted by Egan101 View Post
    I have already replaced three of the valves in the ASX. Maybe the 4th one needs replacement anytime soon. Built-in yung TPMS ng ASX sa HU nya.


    Sent from my iPhone using Tapatalk
    Ito ba yung mga sensors na naka-install sa loob ng rim? If so, how much did it cost you to replace one?

    Sa MS ko, I was quoted Php9,000 for a single replacement. I said forget it and went aftermarket. No regrets ever since.

    Kahit bagong external TPMS ang bibilhin ko taon taon, mura pa rin

  19. Join Date
    Jul 2008
    Posts
    7,119
    #359
    Quote Originally Posted by 111prez View Post
    Ito ba yung mga sensors na naka-install sa loob ng rim? If so, how much did it cost you to replace one?

    Sa MS ko, I was quoted Php9,000 for a single replacement. I said forget it and went aftermarket. No regrets ever since.

    Kahit bagong external TPMS ang bibilhin ko taon taon, mura pa rin
    How long did your OE sensor last? Yung ibang OE batteries ok pa?

  20. Join Date
    Jan 2006
    Posts
    12,608
    #360
    Quote Originally Posted by 111prez View Post
    Ito ba yung mga sensors na naka-install sa loob ng rim? If so, how much did it cost you to replace one?

    Sa MS ko, I was quoted Php9,000 for a single replacement. I said forget it and went aftermarket. No regrets ever since.

    Kahit bagong external TPMS ang bibilhin ko taon taon, mura pa rin
    300 or 350 lang ata binayad ko sa vulcanizing shop.


    Sent from my iPhone using Tapatalk

Tags for this Thread

TPMS (Tire Pressure Monitoring System)