Planning on getting an HID retrofit

[zechs]

Brand preference na lang ba? Mas mahal ang philips compared kay osram.

Willing to try philips but not sure if im willing enough to spend 30usd more haha

[kkreuk18]

Brand preference na lang ba? Mas mahal ang philips compared kay osram.

Willing to try philips but not sure if im willing enough to spend 30usd more haha

Ako di na pede magspend. Malapit na maging isa ang kilay ni kumander. Hahaha

Sent from my R7plusf using Tapatalk

[D3nb3r]

Brand preference na lang ba? Mas mahal ang philips compared kay osram.

Willing to try philips but not sure if im willing enough to spend 30usd more haha

Yes sir preference na lang yan. I'm a philips guy so I try to stick to philips as much as possible and mas prefer ko yung lower kelvin ng extreme vision kesa cbi. Hindi ibig sabihin na inferior na ang osram. Yung cbi nung nilabas was like the rolls-royce of D2S HID kaya din siguro nag labas ng extreme vision ang philips para tapatan ang osram. Isa pa mas famous din ang osram cbi dahil mas cheaper cya pero sobrang lakas and mas prefer ng iba yung 5500k bling look ng cbi.

[TheUninvited]

Sana ma-ayos na. Ibabalik ko this weekend kay sir Pao.

Pinasingaw ko na for more than 24hours by removing the signal lights saka rubber grommet ng headlight/projector.

Nawawala naman sya after a few hours, pero yung natuyong moist nagkaka marks na kase.

Nag moist sya when raining or not. Mas grabe lang ng onti kanina umuulan kase.

Kapag day-time naman hindi nag moist.

[red_one]

Edit: I was intrigued about this kaya I made some research. Actually same lang ata sila if compared(see pics below) now the reason why may dalawang bulb na same lahat ang specs sa isang site ng philips ay hindi ko alam.

It is simple actually. Different packaging or box design needs different product code.

85122 xv2 s1 = gen 2 in box with window

85122 xv2 c1 = gen 2 in box without window

85122 xv c1 = gen 1 in box without window

Sent from my ASUS_X00DDA using Tapatalk

[D3nb3r]

It is simple actually. Different packaging or box design needs different product code.

85122 xv2 s1 = gen 2 in box with window

85122 xv2 c1 = gen 2 in box without window

85122 xv c1 = gen 1 in box without window

Sent from my ASUS_X00DDA using Tapatalk

Yes you are correct. S1 and C1 is packaging lang.

[kkreuk18]

Kakatuwa magsukat ng lux un nagtitinda ng led pnp, nakatutok sa headlight. Natural mas maliwanag ang led.

Sent from my R7plusf using Tapatalk

[zechs]

May bago si lightwerkz. G5-EX. Brighter than the G5-R. Pero nut and bolt method na. Medyo pang advanced na siya.

[TheUninvited]

Finally na-ayos na ni Paolo yung moist. Happy customer na uli.

Good thing, nagamit pa yung old projector/ballast/harness and na-retrofit din sa isang car namin.

Nilagyan lang ng proper D2S bulb, difference was night and day haha!

Stage 2.5 + halo DRL = 15k
Old/New - Album on Imgur

[kkreuk18]

Finally na-ayos na ni Paolo yung moist. Happy customer na uli.

Good thing, nagamit pa yung old projector/ballast/harness and na-retrofit din sa isang car namin.

Nilagyan lang ng proper D2S bulb, difference was night and day haha!

Stage 2.5 + halo DRL = 15k
Old/New - Album on Imgur

Ayos paps. Kahapon galing din kumpare ko dun

Sent from my R7plusf using Tapatalk

[captneo]

Finally na-ayos na ni Paolo yung moist. Happy customer na uli.

Good thing, nagamit pa yung old projector/ballast/harness and na-retrofit din sa isang car namin.

Nilagyan lang ng proper D2S bulb, difference was night and day haha!

Stage 2.5 + halo DRL = 15k
Old/New - Album on Imgur

Nice! Pashare naman ng night shots output boss?

[TheUninvited]

Nice! Pashare naman ng night shots output boss?

Will post kapag naka kuha ng maganda timing. Sa previous pages, may na post ako, pero taken inside the car w/ 3M medium tint.

[D3nb3r]

aligning driver side after tinadtad ko. 1 down 1 to go.


Sent from my SM-J710GN using Tapatalk

[zechs]

Galing DIY lang. Post shots after.

Ung akin di ko pa napapabalikan kay xenon concepts kasi naka-tilt ung passenger side. Actually di na ako ganun ka-bothered ngayon kaya iniisip ko kung papabuksan ko pa ulit.

[D3nb3r]

Galing DIY lang. Post shots after.

Ung akin di ko pa napapabalikan kay xenon concepts kasi naka-tilt ung passenger side. Actually di na ako ganun ka-bothered ngayon kaya iniisip ko kung papabuksan ko pa ulit.

eto yung shot nung medyo madilim na. nag loloko na dslr ko kaya phone cam lang gamit ko. di masyado makita sa pics peroiba talaga ang hotspot nung sa driver side compare sa passenger side na stock pa at yung color flicker sa cut-off mas visible ang blue hue. will post some night output shotspag na tapos ko na sa passenger side. di ko kasi magalaw ang vehicle ngayun pag di pa totally tapos.



pag bolt on madali lang adjust ang rotational alignment provided na di nilagayn ng epoxy ang threaded shaft.
Sent from my SM-J710GN using Tapatalk

[hypnos]

ganda sir. yan na yung xvc1? mini 4.0 projector? halata pagka OC sa color ng wires

[D3nb3r]

ganda sir. yan na yung xvc1? mini 4.0 projector? halata pagka OC sa color ng wires

yes sir.

Sent from my SM-J710GN using Tapatalk

[D3nb3r]

done. shots taken from my dashcam with dark tint. nakalimutan ko na yung percentage nung tint ko.



low


high


la pang outputshots sa kalsada. lakas kasi ulan.

Sent from my SM-J710GN using Tapatalk

[kkreuk18]

Malupit ka talaga bro. Hehehe! Di kaya ng powers ko yan

Sent from my R7plusf using Tapatalk

[zechs]

Nice DIY! Ganda!