New and Used Car Talk Reviews Hot Cars Comparison Automotive Community

The Largest Car Forum in the Philippines

Page 300 of 775 FirstFirst ... 200250290296297298299300301302303304310350400 ... LastLast
Results 5,981 to 6,000 of 15487
  1. Join Date
    Jul 2003
    Posts
    2,267
    #5981
    Innova G Dsl M/T yung sa amin.

    Kaka 5000kms pa lang.

    Noong bago pa lang ito, ginamit ko yung aux power outlet para magbomba ng gulong. Ito yung nasa tabi ng cigarette lighter. Pero yaw gumana. So yung cig lighter outlet muna ginamit ko.

    Pinalitan ko yung fuse pero ayaw pa din.

    Last Saturday sa 5,000kms PMS, pina-check ko na at hindi din nila makuha yung problema ng basta basta so kelangan daw alisin yung dashboard para ma trace ang wiring. Pina-postpone ko muna kasi may lakad ako at hindi naman ginagamit yung outlet na yun. Yung air compressor ko pinalitan ko na ng clip yung dulo para diretso na lang sa battery.

    May naka-experience na ba ng ganito senyo? Balak ko hayaan na lang kasi hindi nga gingamit at ayaw ko din ipabaklas yung dashboard at baka pagmulan pa ng kalampag pag hindi naibalik ng ayos.

  2. Join Date
    Apr 2013
    Posts
    14
    #5982
    Quote Originally Posted by Mile2 View Post
    Usually kasi pag nagpalit ka ng tire-rod sa Innova, dapat palitan mo na rin yung "Upper Ball Joint" para sigurado. For sure malata na yung upper ball joint mo kaya kahit pina-wheel align mo yan meron parin yan kabig, kahit pa nga ipa-camber mo yan meron pa rin kabig. Pag nagpalit ka ng tire rod dapat both side na plus both sides upper ball joint, kahit di mo ipa-align yan mararamdaman mo na diretso steering mo at walang kabig. If you are on budget, get the 555 brand this is what I'm using for about 3 years na at durability is at par with OEM.
    Quote Originally Posted by siopaonatoasted View Post
    Baka sa rim mo ang problema, ilagay mo sa likod yung rim mo sa unahan.
    Quote Originally Posted by amir1223 View Post
    pacamber mo dos..
    maraming salamat sa inyo. ganun na nga siguro palitan ball joints and the other tie rod bago ko ipa-camber para isang gawaan na lang. 555 din ginamit ko na tie rod, 800+/piece. tama ba ang pag presyo sa akin? magkano upper ball joint ng 555 a piece?salamat sa inyo..

  3. Join Date
    Mar 2007
    Posts
    163
    #5983
    Tama ka Retz, Lighting Lab. Hinahanap ko sa google ang service center wala e. Been calling Jedi, sa number niya, di sumasama got, though ringing Yun lang ang problema wala ng after sales service. Also checked Garmin, tinuturo ako sa supplier ng unit e, sarado na tsikot. Kung baga pag nasira tapon na!

  4. Join Date
    Oct 2011
    Posts
    26,781
    #5984
    ^

    maybe sir GH or niky could help you out find sir jedi.

  5. Join Date
    Sep 2010
    Posts
    81
    #5985
    Quote Originally Posted by tjspride View Post
    Thank you po Fredgimed, its not present all the time naman, on certain types of lubak lang. But i remember at certain speed (50 - 70kph) and mapadaan sa medyo masamang lubak lumalabas sya, and i only notice it in my front left, parang nag ddrible yung suspension ang feeling. I had this impression tuloy that innova front suspension is not tough.
    There should be none for any speed, the NVH of innova as well as the suspension is really good and very tough, adventure and crosswind are nowhere near it. Hindi ka ba nadaan sa manhole or something sobrang laking mga lubak?, description sounds like damaged suspension - " dribbling ".

  6. Join Date
    Jul 2011
    Posts
    584
    #5986
    Quote Originally Posted by GLD View Post
    Tama ka Retz, Lighting Lab. Hinahanap ko sa google ang service center wala e. Been calling Jedi, sa number niya, di sumasama got, though ringing Yun lang ang problema wala ng after sales service. Also checked Garmin, tinuturo ako sa supplier ng unit e, sarado na tsikot. Kung baga pag nasira tapon na!
    I think "roadguide" can help you.

  7. Join Date
    Jul 2011
    Posts
    584
    #5987
    Quote Originally Posted by tjspride View Post
    Thank you po Fredgimed, its not present all the time naman, on certain types of lubak lang. But i remember at certain speed (50 - 70kph) and mapadaan sa medyo masamang lubak lumalabas sya, and i only notice it in my front left, parang nag ddrible yung suspension ang feeling. I had this impression tuloy that innova front suspension is not tough.
    check the lug nuts.

    Had an experienced with this, it had more pronounced rattling when braking. (not innova ride)

  8. Join Date
    Nov 2010
    Posts
    667
    #5988
    Quote Originally Posted by Mile2 View Post
    Usually kasi pag nagpalit ka ng tire-rod sa Innova, dapat palitan mo na rin yung "Upper Ball Joint" para sigurado. For sure malata na yung upper ball joint mo kaya kahit pina-wheel align mo yan meron parin yan kabig, kahit pa nga ipa-camber mo yan meron pa rin kabig. Pag nagpalit ka ng tire rod dapat both side na plus both sides upper ball joint, kahit di mo ipa-align yan mararamdaman mo na diretso steering mo at walang kabig. If you are on budget, get the 555 brand this is what I'm using for about 3 years na at durability is at par with OEM.
    madali lang ba palitan ang upper ball joint compare sa lower ball joint Sir Mile?
    how about sa labor sa pagpalit ng rack end, tie rod at upper ball joint? each po ba ang charging sir mile?

  9. Join Date
    Feb 2011
    Posts
    1,214
    #5989
    Quote Originally Posted by tjspride View Post
    Thank you po Fredgimed, its not present all the time naman, on certain types of lubak lang. But i remember at certain speed (50 - 70kph) and mapadaan sa medyo masamang lubak lumalabas sya, and i only notice it in my front left, parang nag ddrible yung suspension ang feeling. I had this impression tuloy that innova front suspension is not tough.
    na eexperience ko din to, di ko na lang pinapansin sir hehe, ito ba yung feeling mo under the floormat sa driver side yung tunog pag nalubak ng malalim? hehe. 2011 G owner here. :D feeling ko ganyan talaga sir hehe.

  10. Join Date
    Aug 2006
    Posts
    2,320
    #5990
    Quote Originally Posted by kristine123 View Post
    madali lang ba palitan ang upper ball joint compare sa lower ball joint Sir Mile?
    how about sa labor sa pagpalit ng rack end, tie rod at upper ball joint? each po ba ang charging sir mile?
    Pricing depends on the mechanic, some charge per piece while some charge per lot. Sa mga tire centers usually kasama na yan lahat sa alignment package, pero kung may kailangan i-press or machine shop iba siyempre ang singil. I prefer changing tire rod, ball joints and rack end sa tire centers dahil sa package job costing and of course they are able to issue official receipts which I need for reimbursements

  11. Join Date
    Jul 2010
    Posts
    36
    #5991
    Quote Originally Posted by Mile2 View Post
    Condolences po. IMO, pare-pareho lang po ang singil ng mga casa, kaya lang nagiging mahal kasi marami silang dinadagdag na "extras" gaya ng Flushing, Oil treatment, fuel treatment, engine detailing na puede pong hindi kasama sa job order. Pag nagpa PMS kayo, make it a habit to say clearly sa Service Advisor na "ayaw" ninyo ng extras, just pure oil change lang at mas mura kung mineral oil, it should be less than 2K pag mineral oil at walang extras.

    Pag 10K sa D4d, eto ang minimum parts.

    1. Oil - 7 liters
    2. Oil Filter
    3. Fuel Filter

    Don't add fuel treatment, flushing etc it would shoot up your bill to 3K-5K.
    Sir Mile2 maraming salamat sa info. I just received my SA reply from Toyota Manila Bay today, approx 7-8K daw ang aabutin ng 10K maintenance. Grabe din nman. Tnx for the advice.

  12. Join Date
    Apr 2013
    Posts
    8
    #5992
    Quote Originally Posted by ericson21 View Post
    na eexperience ko din to, di ko na lang pinapansin sir hehe, ito ba yung feeling mo under the floormat sa driver side yung tunog pag nalubak ng malalim? hehe. 2011 G owner here. :D feeling ko ganyan talaga sir hehe.
    Tama ka Sir, ganun nga, andun yung tunog pag nalulubak ka, pero not necessary malalim basta yung masamang lubak, alam nyo na yun Sir. hehe 2012 G owner din. If that's the case Sir itolerate ko nalang, and will try to have it checked sa dealer on my next PMS.

  13. Join Date
    Jan 2012
    Posts
    82
    #5993
    Quote Originally Posted by tjspride View Post
    Tama ka Sir, ganun nga, andun yung tunog pag nalulubak ka, pero not necessary malalim basta yung masamang lubak, alam nyo na yun Sir. hehe 2012 G owner din. If that's the case Sir itolerate ko nalang, and will try to have it checked sa dealer on my next PMS.
    sir, have you tried checking the brake pedal po? In my case, I've changed yung front suspensions only to find out that the problem is a loose brake pedal screw.

  14. Join Date
    Jan 2012
    Posts
    298
    #5994
    Quote Originally Posted by 1natzt View Post
    sir, have you tried checking the brake pedal po? In my case, I've changed yung front suspensions only to find out that the problem is a loose brake pedal screw.
    May napansin akong ganyang tunog pag dumadaan ako sa paint stripes along CP. Garcia (continous stripes of reflective paint)..nung 5K PMS ko pina check ko and they adjusted something sa pedals..ayun wala na.

  15. Join Date
    Oct 2011
    Posts
    26,781
    #5995
    When you pull your handbrake lever, ilan clicks naririnig niyo upon reaching its maximum? and when should it be adjusted?

  16. Join Date
    Nov 2010
    Posts
    667
    #5996
    Quote Originally Posted by Retz View Post
    When you pull your handbrake lever, ilan clicks naririnig niyo upon reaching its maximum? and when should it be adjusted?
    5 or 6 clicks ata... dati umabot 9... na adjust nila during PMS.

  17. Join Date
    Nov 2010
    Posts
    667
    #5997
    Quote Originally Posted by Mile2 View Post
    Pricing depends on the mechanic, some charge per piece while some charge per lot. Sa mga tire centers usually kasama na yan lahat sa alignment package, pero kung may kailangan i-press or machine shop iba siyempre ang singil. I prefer changing tire rod, ball joints and rack end sa tire centers dahil sa package job costing and of course they are able to issue official receipts which I need for reimbursements
    how about lower ball joint sir mile2? napalitan na rin ba yung sayo?

  18. Join Date
    Mar 2008
    Posts
    54,628
    #5998
    Quote Originally Posted by Retz View Post
    When you pull your handbrake lever, ilan clicks naririnig niyo upon reaching its maximum? and when should it be adjusted?
    fresh from the factory.. 2-3 clicks.

  19. Join Date
    Jan 2010
    Posts
    304
    #5999
    ano ba talagang sinusunod nyo sa PMS yung kilometer run or yung time lapsed? sabi kasi for example 25,000km or 18 months which ever comes first?
    kung susundin kasi 18 months parang every 3 months mag pa PMS or 18 months after the last PMS?

  20. Join Date
    Jan 2012
    Posts
    298
    #6000
    Quote Originally Posted by Capsaul View Post
    ano ba talagang sinusunod nyo sa PMS yung kilometer run or yung time lapsed? sabi kasi for example 25,000km or 18 months which ever comes first?
    kung susundin kasi 18 months parang every 3 months mag pa PMS or 18 months after the last PMS?

    Ideally, its every 5,000kms or every 3months. whichever comes first. pero hindi mahigpit ang mga service advisors ng toyota. kadalasan based sa milage ang PMS.

Toyota Innova Owners & Discussions [continued 3]