Grease for brake caliper pins

**Vodka** · September 8th, 2018 02:57 PM

just got the Dynatex. big tube! those are leathermans for size comparison

it's also a lot stiffer than the one in the green tube

**yapoy86** · September 8th, 2018 03:35 PM

Originally Posted by Vodka

just got the Dynatex. big tube! those are leathermans for size comparison

it's also a lot stiffer than the one in the green tube

ganyan din kalaki yung cyclo na nabili ko sa concorde.. matagal labasan yan.. kailangan madiin ang pindot

**jaypee10** · September 8th, 2018 03:46 PM

Originally Posted by 12vdc

Wag to. Sa fan coupling gamit, kapag umiinit naninigas.. Nagkalat yan sa auto supply.

O alam nyo na kung saan magandang gamitin ito...

**ninjababez** · September 9th, 2018 05:21 AM

Originally Posted by Vodka

just got the Dynatex. big tube! those are leathermans for size comparison

it's also a lot stiffer than the one in the green tube

wont dry out in service!!!
yan ang gusto ko bro hahaha

**Vodka** · September 9th, 2018 05:52 PM

so i cleaned out all the wurth brake paste, which had become crusty and flaky

**StockEngine** · September 9th, 2018 06:09 PM

Wrong sachets 🤭

Sent from my SM-N960F using Tapatalk

**bugoys** · September 9th, 2018 10:21 PM

[QUOTE=Vodka;3004832]

Nice! Ordered mine today! 380 na lang. Hahahah. Yung wurth (for the shims) hanap ko next week. At nang masimulan na ang diy brake job.

Thanks for the help, bro.

**hilldweller** · September 9th, 2018 10:24 PM

Nagsearch ako sa Lazada silicon lubricant, ito ang lumabas: "You must be at least 18 years old to enter this section of Lazada. Please confirm your age:"

Nine years ago, nilagyan ko ang sliding pins at rubber boots ng ordinary grease, wala kasi akong nahanap na suitable brake grease. Hindi naman lumubo ang rubber boots hanggang ngayon, it looks okay pa. Ang butas lang ng caliper ang lumuwang, nadevirginize. Matagal bago ko nalaman na ito pala ang sanhi ng kalansing every time na malubak ang oto. Okay lang masira ang rubber boots, mura lang ito, less than 100 pesos. Medyo mahal at mahirap hanapin ang caliper, machine shop na ang tuloy kung wala talaga mahanap.

**ninjababez** · September 9th, 2018 11:27 PM

[QUOTE=bugoys;3005134]

Originally Posted by Vodka

Nice! Ordered mine today! 380 na lang. Hahahah. Yung wurth (for the shims) hanap ko next week. At nang masimulan na ang diy brake job.

Thanks for the help, bro.

San mo nabili bro?

Sent from my SM-C900F using Tapatalk