Best shop in Metro Manila to install lower control arm bushing?

**tensazangetsu** · January 3rd, 2020 07:22 PM

Hi guys, just want to ask any recommended shop in Metro Manila to install lower control arm bushing?

I'm planning to buy OE control arm bushing then ipapa-install nalang since may crack na yung bushing ng sasakyan.

Yun ibang nakita ko kasi buong lower control arm assembly yung binebenta abutin ako 18k pesos if assembly masakit sa bulsa.

Thanks

**StockEngine** · January 3rd, 2020 07:46 PM

Most suspension shops will have a bushing service kit. Some bigger shops have a press'. Search near your area baka meron. You can use fb search. Suspension shop marikina for example.

**benchph1** · January 4th, 2020 10:11 AM

Any shop with a hydraulic press should be able to install suspension bushings.

Sent from my iPhone using Tapatalk

**dr. d** · January 4th, 2020 10:25 AM

caveat.
replacement of the bushings alone, and not the entire assembly, might result in a "not-too-satisfactory" performance.
but as it's the much cheaper solution... i'd try it, myself.

**ninjababez** · January 4th, 2020 10:55 AM

m7 outlets - M7 Enterprise

**tensazangetsu** · January 4th, 2020 10:05 PM

Originally Posted by ninjababez

m7 outlets - M7 Enterprise

Thanks sir! :D

- - - - - - - - - - - - - - - - - - - - - -

Originally Posted by Lakwatsero

Curious lang, ano unit mo?

3rd gen Mazda 3 skyactiv sir

**bhybhoy** · January 5th, 2020 12:59 AM

Originally Posted by tensazangetsu

Thanks sir! :D

- - - - - - - - - - - - - - - - - - - - - -

3rd gen Mazda 3 skyactiv sir

Sir ano problem ng car mo? Maingay ba pag nalulubak?
Same din sa akin and recommended ng casa change the assembly which cost 18k.

Thanks po

**tensazangetsu** · January 4th, 2020 10:03 PM

Originally Posted by dr. d

caveat.
replacement of the bushings alone, and not the entire assembly, might result in a "not-too-satisfactory" performance.
but as it's the much cheaper solution... i'd try it, myself.

Thanks doc! I'm planning to replace it with the original bushing. Will buy the bushing from Casa then have it installed outside.

Or would it be better if ipagawa ko na sa casa yung pag install ng bushing?

**sirkosero** · January 4th, 2020 11:11 PM

Originally Posted by tensazangetsu

Thanks doc! I'm planning to replace it with the original bushing. Will buy the bushing from Casa then have it installed outside.

Or would it be better if ipagawa ko na sa casa yung pag install ng bushing?

I honestly doubt may bushing sa casa. Assemblies sila normally

Sent from my MI MAX 2 using Tapatalk

**tensazangetsu** · January 4th, 2020 11:36 PM

Originally Posted by sirkosero

I honestly doubt may bushing sa casa. Assemblies sila normally

Sent from my MI MAX 2 using Tapatalk

I already called casa already sir kahapon meron daw sila for 1.2k+ per piece. I also thought na assembly lang kasi yung niquote nila sa akin last year yung buong assembly then last week found out na meron pala yung bushing lang mismo.