New Mitsubishi Strada [ARCHIVED]

[bluemica]

mga boss angel eyes po ang tawag dun sa projector headlights hindi po eagle eyes hehe

[locoroco777]

mga sir, ano kaya solution na ginawa ni sir Av8or5?

if I remember correctly kamuka lang nung ginawa mo ang ginawa ng casa nilagyan ng clamp yung hose.... so IMO ang gagawin nalang ng casa is icheck kung pulido yung DIY mo....

[av8or5]

yup, ganun nga nangyari. they just clamped the hose, the computer sensor notice that so , nag slow down ang strada.

have them check your diy and tell them that should not happen.

oo sir...kaya pa tawaran konting bola lang dun sa may ari...



hi sir!

I think it also happened na with sir av8or5.....from what I recalled that he said...its a hose from the turbo...same din nangyari sa inyo lost of power and weird sounds....and from then on I think wala pa namang nagiging problema yung engine nya....talagang natangal lang yung hose...

but lets wait for his opinion...para sure...hehe

but better have it checked nadin just to be sure...and don't worry too much...pag mga ganyang bagay its all under the warranty...




I have mine installed for almost 2 years now....ok parin sya until now....

just a reminder lang with the soft cover users.....kapag rainy season and then nakapark kayu in an open parking....make sure na ifold nyo yung cover before nyo iwan...kasi kapag umulan mag aacumalate yung tubig dyan tapos lulundo....nangyari sakin dati yan....parang nagkaron ng batcha sa bed ko hehe....tapos umangat yung bedliner hehe...and be sure also na ilagay nyo muna sa loob ng truck nyo yung support bar mahirap na baka manakaw...

mga sir, ano kaya solution na ginawa ni sir Av8or5?

i brought the car to the dealer, sila mismo nag clamp and they explained what happened. this happened a few days after i had my PMS.

mga boss angel eyes po ang tawag dun sa projector headlights hindi po eagle eyes hehe

actually eagle eyes is the brand, but pwede rin kasi eagle eyes kasi the new model with the turn signal looks like the eyebrow of an eagle.

[altec]

bro look ........

b6a dls speakers ( tweeter at the tweeter compartment )



xxx mono amplifier "subwoofer lang dala neto"


customized sub speaker box with 12" xxx thin subwoofer 1200 watts ata yan im not sure...hehehehe


share ko lang baka makakatulong sa enquiry mo bro....uhhmm ok naman ang output, kumbaga me katawan un sound kahit papanu... more or less mga 20k lang yan bro....di ako nagpalit ng h.u.

yung customized sub box, hindi mo pinaputol yung base holder ng hydraulic jack? Yun ba yung color blue pa rin sa center bottom of the sub box? Saan mo nilagay yung mga tools, jack, at EWD kung yung customized box mo covers the whole space? Would it be possible to customize the box to put it on half of the space instead of the whole space? 8 or 10 inch lang yung kicker ko.

Ipapakita ko ito sa suki shop ko para may basehan. Thanks for the pics!

[dakar_010]

Good morning!! mga sir how can i apply for the membership of strada club?

[bigtrak]

if youre unit is GLX 1 piece ang bumper nyan hindi mahiwalay yung dalawang fiberglass sa aluminum, if GLS 3 piece yan cya and sold separately.

GLX sir mga how much kaya? mukhang 3 piece na remove ok yung black plastic. parang papel lang na napunit yung damage

Thanks

[bigtrak]

[quote=av8or5;1447091]sir, palitan ninyo na lang with manolo and manong sael's fabricated bumper. sir, we can meet you naman, special request..hehehe. saan ba kayo work?


global city sir mag leave nalang sometime to attend the eb. thanks

[Pol-pol]

GLX sir mga how much kaya? mukhang 3 piece na remove ok yung black plastic. parang papel lang na napunit yung damage

Thanks

Hi Sir.

I also have a GLX unit. I had the left side of my rear bumper replaced but claimed it from my insurance company. When I got my unit back the invoice indicated that the fiberglass portion they replaced was around 6k.

Might be a better idea to get the Fabricated Rear Bumpers, its more sturdy. I cracked the new fiberglass covers again while backing into my office parking space. Have not claimed for a replacement since my minimum participation is also 6k.

[av8or5]

Good morning!! mga sir how can i apply for the membership of strada club?

sir just attend a meet up, usually naman every friday yun and we have started changing venues to accommodate other locations. visit www.stradaclubph.com

[quote=bigtrak;1447785]

sir, palitan ninyo na lang with manolo and manong sael's fabricated bumper. sir, we can meet you naman, special request..hehehe. saan ba kayo work?


global city sir mag leave nalang sometime to attend the eb. thanks

no need to leave sir, meron din naman kami meet up on saturdays or weekends, you can join us then. we look forward for you to join us.

[alvin19]

sir av8or5 just to confirm.. if Im facin the car with the hood open and facing the engine, its at the right side and somewhat nasa ilalim banda?

[alvin19]

Pahabol na tanong mga sir....

Im sure i read it along the tread but cant seem to find it again. Just wondering whats the best tire pressure for my Strada GLX 200 model with the stack tire and rim (yun Maliit na glong heheh)

Ano maganda sa front and back?

[dakar_010]

[quote=av8or5;1447845]sir just attend a meet up, usually naman every friday yun and we have started changing venues to accommodate other locations. visit www.stradaclubph.com

thanks sir...hope to see you on the next eb...i will go there with shakatak

[av8or5]

sir av8or5 just to confirm.. if Im facin the car with the hood open and facing the engine, its at the right side and somewhat nasa ilalim banda?

thats it sir.. the hose is small in size but mahaba..that connects to the sensor, thats why when it pulled out, na sense ng sensor less air.

Pahabol na tanong mga sir....

Im sure i read it along the tread but cant seem to find it again. Just wondering whats the best tire pressure for my Strada GLX 200 model with the stack tire and rim (yun Maliit na glong heheh)

Ano maganda sa front and back?

ako sir 30front and 29 back

[quote=dakar_010;1447898]

sir just attend a meet up, usually naman every friday yun and we have started changing venues to accommodate other locations. visit www.stradaclubph.com

thanks sir...hope to see you on the next eb...i will go there with shakatak

okay sir... we look forward for you two to become member of this rocking club. nasa 171 na yata kami

[alvin19]

Sir thanks so much... ang bilis ng reply..... galing ng Strada Club

[bigtrak]

baka meron sa inyo nag bebenta ng stock bumper sa likod yung plastic na black please pm me? thanks

[mdksael]

yung customized sub box, hindi mo pinaputol yung base holder ng hydraulic jack? Yun ba yung color blue pa rin sa center bottom of the sub box? Saan mo nilagay yung mga tools, jack, at EWD kung yung customized box mo covers the whole space? Would it be possible to customize the box to put it on half of the space instead of the whole space? 8 or 10 inch lang yung kicker ko.

Ipapakita ko ito sa suki shop ko para may basehan. Thanks for the pics!

bro, wala ako pinutol jan, tinangal ko lang yun clip noong spare tire release turner, since i have my lid cover i put those things at the back. siguro pwede naman liitan mo bro pero iba ang hataw noon kasi mejo maliit lang siya, and you should need a thin subwoofer for that. .....10" or 8" will do basta thin speakers siguro....pero just wait baka merun pang ibang makapagbigay sayo ng dagdag inputs, naka pag gamit ng ord. subsss not thin.....

[av8or5]

baka meron sa inyo nag bebenta ng stock bumper sa likod yung plastic na black please pm me? thanks

sir i have bumper but problem, meron hole kasi i had a back up camera, but i think meron yata dito okay pa rin bumper. lets just wait and see if mag post sila.

[locoroco777]

baka meron sa inyo nag bebenta ng stock bumper sa likod yung plastic na black please pm me? thanks

meron ako dito....half the casa's price..... from a GLS sport...which is a thicker one...

[MarckTeach]

try mu sa mitsu edsa meron sila malapit sa oliveros.

[MarckTeach]

tanung lang mga guro, i had my 2 months glx tapus last holy thursday bumiyahe kami ng zambales i notice nung pag balik namin kinabukasan pag start ku yung kamay ng heat temp. hindi gumalaw di ba po dapat nasa gitna agad yung reading pag on ng switch tapus nung pinatakbo kuna yung strada ko unti -uniting umaakyat yung kamay tapus nag steady na sa gitna yung reading, dati kasi pag start ko nasa gitna na yung reading...normal ba yun?